Bedienungsanleitung Nissan R50

24 Seiten 0.81 mb
Download

Zur Seite of 24

Summary
  • Nissan R50 - page 1

    1 1996 – 1999 Nissan Pathfinder (R50) Automatic to Manual Transmission Conversion Manual ...

  • Nissan R50 - page 2

    2 1996 – 1999 Nissan Pathfinder (R50) Automatic to Manual Transmission Conversion Manual Conversion perfor med an d Manual Created by Keith Maddox 11/23/20 05 ...

  • Nissan R50 - page 3

    3 Table of Contents Overview 5 Tools Required 6 Parts List 7 Automatic Transmission 8 Removing the Automatic 9 Remove the i nterior 11 Electrical 12 Electronic Control Module Replacement 13 ASCD Modificati on 14 Park Neutral Switch Modifi cation 14 Clutch 15 Clutch activation system 16 Clutch lines i nstallation 16 Pilot bushing adapter removal 17 ...

  • Nissan R50 - page 4

    4 Table of Contents Continued Manual Transmission 19 Manual Transmission W iring 20 Manual Transmission I nstallation 21 Interior Installation 22 Motor Mount Conversion 23 Illustration list 24 ...

  • Nissan R50 - page 5

    5 Overview This manual will, in detail, give the information you will need to convert a 4x4 1996-19 99 Nissan Pathfinder from an automatic transmission to a manual transmi ssion. Having a manual transmission in your Pathfinder gi ves you more control, lower gears, and more power than you would have with an automatic. Other benefits inc lude better ...

  • Nissan R50 - page 6

    6 Tools Required 3/8” Socket set with metric sizes from 8mm to 19mm ½” Socket set with metric sizes from 12mm to 27mm 3/8” Ratchet 3/8” Extensions in 3” 6” and 9” lengths 3/8” Universal joint (swivel) ½” Ratchet ½” Extensions in 3” or longer lengths ½” Breaker bar ½” Torque wrench Open ended wrench set from 8mm to 27m ...

  • Nissan R50 - page 7

    7 Parts List Part Description for clutch activation Part Numbers Quantity Needed Clutch Pedal Bracket 46550-0W501- 1 Brake Pedal and Bracket 46501-0W000- 1 Clutch Master cylinder 30610-0W050- 1 Clutch to dampener line 30850-0W000- 1 Clutch Dampener bolts 08146-6162G- 2 Clutch Dampener 30660-0W000- 1 Clutch Dampener to passenger fender line 30851-1W ...

  • Nissan R50 - page 8

    8 Section 1: Automatic Transmission Fig. 1.1 Automatic transmission and W iring Harness ...

  • Nissan R50 - page 9

    9 Removing the Automatic Transmission Before starting this procedure drain the automatic transmission fluid and transfer case fluid (4wd models). I t’s important to dispose of all flui ds at an authorized recycling center. 1. Remove the negative battery cable. 2. Remove the crankshaft position s ensor. It is located on the top driver’s side of ...

  • Nissan R50 - page 10

    10 16. Check to make sure you have re moved all wi res and cables from the transmissi on. 17. Support the automatic transmissi on with the transmission jack 18. Remove the transmission cross member. 19. Lower the automatic transm ission with transfer case (4wd models). Warning: Be careful not to let th e torque conv erter slide off. ...

  • Nissan R50 - page 11

    11 Removing the Interior Panels 1. Remove the ashtray. Remove the screw under the ashtray and pull out the bezel that covers the automati c transmission shifter. 2. Remove all screws holding the center console and li ft it up. Under the rear of the console unplug the rear power outlet connection. 3. Remove the automatic transmission cable on the pa ...

  • Nissan R50 - page 12

    12 Section 2: Electrical Fig. 2.1 Power Supply Ro uting Electronic Control Module Replacement Information about the Nissan ECM: T here are several year breaks in the Pathfinder model line. Below is a listing of ECM part numbers and the month/year that part number applies to. ...

  • Nissan R50 - page 13

    13 Build Date Part Number 1095-0796 23710-0W000- 0796-1296 23710-1W201- 1296-0797 23710-1W203- 0797-0398 23710-1W600- 0398-0998 23710-1W602- 0998-1298 23710-1W608- 1298-0999 23710-2W601- 0999-0100 23710-2W602- The above parts lis t only applies to v ehicles with the V G33 motor and FE D emissions. 1. Make sure the negative battery cable is disconne ...

  • Nissan R50 - page 14

    14 ASCD and Park Neutral Switch Conversion (Aut omatic speed c ontro l device) Not ice: M ake su re to follow the se in stru ction s or th e tru ck wi ll not start . 1. Locate the park neutral relay. 96 and some 97 models In some 97 and earlier vehicles i t is locate i n the driver side relay box in the engine compartment and is labeled N*P. Remove ...

  • Nissan R50 - page 15

    15 Section 3: Clutch Fig 3.1 Clutch ki t from AutoZone ...

  • Nissan R50 - page 16

    16 Installing the Clutch activation system This section deals with tight spaces under the dash and in the engine compartment. All items we are installing either use fasteners from the item they replace or there are already unused mounts in the vehicle. WARNING: DO NOT ROT ATE THE STEERING WHEEL WHILE DISCONNECTED! 1. Remove trim under steeri ng col ...

  • Nissan R50 - page 17

    17 3. Remove the top most brass brake di stribution block and bracket . Fig 1.2 4. Loosely install the new brake/clutch distribution block and loosely reinstall all brake lines. 3. Install clutch line (part number 30851-1W 200) across the firewall. It is easiest to feed this line down on the pa ssenger side and into the new distribution block (fi g ...

  • Nissan R50 - page 18

    18 Fig. 3.5 Pilot bearing installed in crankshaft. 5. Place the flywheel on the crankshaft mount and install the new crankshaft bolts. (part 12315-D0210) Fig. 3.6 Flywheel in stalled. 6. Apply grease to clutch splines. 7. Install the clutch with tool springs facing outward. 8. Install the pressure plate and bolts. 9. Tighten pressure plate bolts in ...

  • Nissan R50 - page 19

    19 Section 4: Manual Transmission Fig. 4.1 FS5R30A and T X-10 Assembly ...

  • Nissan R50 - page 20

    20 Manual transmission wiring Before installing the manual transmi ssion you need to make sure the neutral, reverse, 4x4 high and 4x4 low switches are in working order. 1. To test the reverse switch simply put the transmission in reverse and check continuity , any ot her position should not have continuity. 2. To test the neutral switch leave the t ...

  • Nissan R50 - page 21

    21 4. Cut all of the wires from t he automati c position switch off at the switch. 5. Leave the wires attached to thei r plugs. 6. Set aside the plug with the two large brown and black wires, you will use this later. 7. Take the black and green wi re from the other plug with many wires and solder them to the wires coming off the reverse switch on t ...

  • Nissan R50 - page 22

    22 Fig. 4.5 Bell housing bolt pattern and bolt torque informat ion 7. Refer to section 11 for information on converting the automati c transmission mount to work on the manual transmission. 8. Reinstall the transmission cross member. 9. Reinstall the front (4wd models) and rear drive shaft. 10. Reinstall the starter and wiring. 11. Plug in all elec ...

  • Nissan R50 - page 23

    23 Motor Mount Conversion 1. Re-drill the top holes as shown below to convert the motor mount. Fig. 4.8 Automatic Transmission mo t or mo unt red-drilled for Manual Transmission. Illustrations List ...

  • Nissan R50 - page 24

    24 Figure 1.1 Automatic Transmission Figure 1.2 Torque converter bolts through starter hole. Figure 2.1 Power Supply Routing Figure 2.2 Relay Assembly, 96 model shown. Figure 2.3 Relay Assembly, 97 and later. Figure 3.1 Clutch kit from AutoZone Figure 3.2 Clutch Dampener Figure 3.3 Clutch transfer block, passenger Figure 3.4 Blind hole puller tool. ...

Produzent Nissan Kategorie Electric Heater

Dokumente, die wir vom Produzenten des Geräts Nissan R50 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Nissan
- Bedienungsanleitungen R50
- Produktkarten Nissan
- Informationsbroschüren
- oder Energieetiketten Nissan R50
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Nissan R50.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Nissan R50, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Nissan R50. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Nissan R50 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Nissan R50, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Nissan R50 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Nissan R50 verständlich ist.

Eine gänzliche Bedienungsanleitung von Nissan sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Nissan R50 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Nissan R50 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Nissan R50, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Nissan R50 - die uns die ersten Schritte während der Nutzung von Nissan R50 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Nissan R50 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Nissan R50 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Nissan R50?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Nissan R50 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Nissan R50 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)