Bedienungsanleitung JBL SCS200.6/230

14 Seiten 0.44 mb
Download

Zur Seite of 14

Summary
  • JBL SCS200.6/230 - page 1

    SCS200.5/230 and SCS200.6/230 SURROUND CINEMA SPEAKERS OWNER’S GUIDE ® The SCS200.6 system is shown here. ...

  • JBL SCS200.6/230 - page 2

    2 READ FIRST! Important Safety Precautions! 1. Unpacking: Check the product carefully. If it has been damaged in transit, report the damage immedi- ately by calling your dealer and/or the shipping company that delivered it. 2. Connections: Whenever changing, connecting or disconnecting signal or power cables etc., always turn off all equipment. Thi ...

  • JBL SCS200.6/230 - page 3

    3 antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and require- ments for the grounding electrode. See Figure A. 18. An outside antenna system should not be located in the vicinity of over- head power lines or other electric light or power circuits, or where it can fall in ...

  • JBL SCS200.6/230 - page 4

    4 INCLUDED THANK Y OU FOR CHOOSING JBL For more than 50 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. W e’re confident that the JBL system you have chosen will provide every note of enjoy- ment that you expected – and that ...

  • JBL SCS200.6/230 - page 5

    5 SPEAKER PLACEMENT SUBWOOFER SURROUND SPEAKERS † 1.5 – 1.8m 5 – 6 ft † FRONT SPEAKERS 0-0.6m 0-2 ft The front speakers should be placed the same distance from each other as they are from the listening position. They should be placed at about the same height from the floor as the listeners’ ears will be, or they may be angled toward the l ...

  • JBL SCS200.6/230 - page 6

    6 MOUNTING OPTIONS On shelves. On the wall. W all brackets are included. On optional stands. SA TELLITES AND SURROUNDS Prepare the speaker wire as described on page 8. Thread the two conductors through the two holes in the stand bracket. Make sure to pre- serve the proper polarity (+ and – connections) by threading the positive con- ductor throug ...

  • JBL SCS200.6/230 - page 7

    7 Important Safety Note: The customer is solely responsi- ble for proper selection of mounting hardware not included with the speakers, and for proper assembly and installation of the wall-brack- ets, including but not limited to the selection of appropri- ate weight-bearing supports and proper use of the bracket. JBL disclaims any liability for th ...

  • JBL SCS200.6/230 - page 8

    CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the ends of the speaker wire as shown. The wires supplied with the system may already be stripped and tinned for easy insertion into the speaker terminals. Y ou may need to separate the two conductors further in order to thread them through the shelf stand or floor stand adaptor . Speakers and ...

  • JBL SCS200.6/230 - page 9

    9 DOLBY PRO LOGIC* (NON-DIGIT AL) – LINE LEVEL Use this installation method for Dolby Pro Logic* applica- tions (not Dolby Digital, DTS or other digital processing), where the receiver/proces- sor is equipped with a sub- woofer output, or a volume- controlled preamp (line-) level output: Use RCA-type interconnects to connect the line-level subwoo ...

  • JBL SCS200.6/230 - page 10

    10 DOLBY PRO LOGIC (NON-DIGIT AL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS or other digital processing), where the receiver/proces- sor does not have a sub- woofer output, or a volume- controlled preamp (line-) level output: Connect your receiver or amplifier’ s front left and right ...

  • JBL SCS200.6/230 - page 11

    11 OPERA TION MIN MAX Subwoofer Level MIN MAX Subwoofer Level Move the Master Power switch (marked “Power” å ) to the “•” (On) position to use the SUB200 subwoofer . If you will be away from home for an extended period of time, or if the subwoofer will not be used, switch the Master Power switch å to the Off position. VOLUME ∫ å V ol ...

  • JBL SCS200.6/230 - page 12

    12 If there is no sound from any of the speakers: • Check that receiver/ampli- fier is on and a source is playing. • Check that the powered subwoofer is plugged in, and its Power switch å is switched on (“ • ” position). • Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are connected. Mak ...

  • JBL SCS200.6/230 - page 13

    13 If there is no sound from the surround speakers: • Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punc- tured, or touching each other . • Review proper operation of your receiver/amplifier and its surround sound fea- tures. ...

  • JBL SCS200.6/230 - page 14

    14 SCS200.5/230 AND SCS200.6/230 SY STEMS Frequency Response 35Hz – 20kHz (–6dB) SA TELLITES Maximum Recommended Amplifier Power 100 Watts Power Handling (Continuous/Peak) 50W/160W Nominal Impedance 8 Ohms Sensitivity 86dB @ 1 Watt/1 meter Frequency Response 110Hz – 20kHz (–6dB) T weeter One 13mm (1/2") titanium-laminate dome, video-sh ...

Produzent JBL Kategorie Speaker System

Dokumente, die wir vom Produzenten des Geräts JBL SCS200.6/230 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen JBL
- Bedienungsanleitungen SCS200.6/230
- Produktkarten JBL
- Informationsbroschüren
- oder Energieetiketten JBL SCS200.6/230
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung JBL SCS200.6/230.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen JBL SCS200.6/230, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen JBL SCS200.6/230. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts JBL SCS200.6/230 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts JBL SCS200.6/230, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von JBL SCS200.6/230 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von JBL SCS200.6/230 verständlich ist.

Eine gänzliche Bedienungsanleitung von JBL sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von JBL SCS200.6/230 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von JBL SCS200.6/230 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich JBL SCS200.6/230, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts JBL SCS200.6/230 - die uns die ersten Schritte während der Nutzung von JBL SCS200.6/230 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit JBL SCS200.6/230 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von JBL SCS200.6/230 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich JBL SCS200.6/230?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit JBL SCS200.6/230 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit JBL SCS200.6/230 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)