-
Siemens Hicom cordless EM - page 1
s Hicom cordless EM Gigaset active Operating instructions Wa r n i n g ! Read the saf ety notes on pages 2 and 5 bef ore put ting the equipment into service. ...
-
Siemens Hicom cordless EM - page 2
2 General Safety notes Notes on mobile unit use ● Research has sho wn that electronic devices , such as medical equ ipment, can b e affected b y the mobile unit. Local safety regulations mu st theref ore be observed! ● The mobile unit is not suitable for people with hearing aids since the radio signals inte rf ere with hearing aids , producing ...
-
Siemens Hicom cordless EM - page 3
3 General Figure 1: Operating el ements, unit par ts * Shows v ar iant without Ex-prote ction indication Operating elements, unit parts 1 2 4 5 6 7 8 9 3 11 12 10 * 1 Receiv er inset 2 Displa y (illuminated ) 3 Displa y ke ys 4M e n u k e y 5 On-hook key 6T a l k k e y 7 Recall ke y 8 Microphone 9 On/Off key 10 Attachment clip assemb ly , see page ...
-
Siemens Hicom cordless EM - page 4
4 General Features of the DECT* mobile unit ● Illuminated graphical display with battery charge display ● Status-dependent functions ● Number redial for the last fiv e numbers dialled ● Telephone book in the mobile unit for 100 entri es ● Enhanced user guidance with displays in German, Eng lish , French, Italian, Span ish, P or tuguese or ...
-
Siemens Hicom cordless EM - page 5
5 General Additional safety notes f or the standard version Notes on mobile unit use ● Do not charge and us e the mobile unit in en viron- ments where there is danger of e xplosion . Notes on battery use ● Only use appro ved nickel-cadmium batteries (NiCd batteri es) or nickel-metal-h ydride batteries (NiMH), see page 17. Additional safety note ...
-
Siemens Hicom cordless EM - page 6
6 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Operating elements, unit parts . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hicom cordless EM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Environmental conditions ...
-
Siemens Hicom cordless EM - page 7
7 General T elephone directory . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Entering letters/characters and digits . . . . . . . . . . . . . . . 34 Overview – directory submenu . . . . . . . . . . . . . . . . . . . . 36 Storing numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Dialling a numb er from the telepho n ...
-
Siemens Hicom cordless EM - page 8
8 The Hicom ® cordless EM DECT* tele phone system com- pris es ● the radio exchange for th e Hicom 150 E system, ● up to 16 base stations (t ransmitter/receiver), ● up to 64 2000C mobile units (cordless telephone), ● and the Gigaset 2000L charging shell. ● Please read the saf ety notes on pa ges 2 and 5. ● Make sure that the mobile uni ...
-
Siemens Hicom cordless EM - page 9
9 General ● Local function s can also be pe rf ormed in the charging shell. ● Before sa ving, local functions can be cancelled with the menu ke y or the on-hook key A . ● Y our telephone di rector y entr ies, all settings and your PIN are not l ost , ev en if you remo ve the batteries. ● Call charges are displayed on the mo bile u ...
-
Siemens Hicom cordless EM - page 10
10 ● Integrated power saving function: If you leav e the base station radio rang e when the mobile unit is switched on, the inter val between synchronisati on attempts gradually increases – th is increases the batter y life in standby mode. T o ens ure that the mobi le unit can b e used as soon as you return to the radio networ k, you should im ...
-
Siemens Hicom cordless EM - page 11
11 The mobile un it fea tures a 4-line di spla y with 16 char acters per line. Depending on the situation, th e display shows: ● digits, e.g. dialled numbers, ● text, e.g. the current base (syste m), ● symbols, e.g. r inging or batter y sy mbol, ● and in the last line the current functions of the t wo dis- play k eys. Display when the mobil ...
-
Siemens Hicom cordless EM - page 12
12 The two displ a y ke ys are located dir ectly under the displa y . The current functions o f the displa y keys are status- dependent and are dis pla yed in the lower displa y line. Each display ke y can be used to disp lay one or two functions. In the case o f two functions, you m ust press either on the left or the right side of the corresp ond ...
-
Siemens Hicom cordless EM - page 13
13 The user-friendl y disp lay system gu ides the user qui ckly and effectively through the entire range of features av ailab le with this telephon e system. F or inf or mation on setting the language, see page 5 7. Different functions can be selec ted depending on the status of the mobile unit, e .g. "on" or if a call is in progress . On ...
-
Siemens Hicom cordless EM - page 14
14 General Display key f o r cancelling func tions/ returning to the next menu le vel up. A On-hook key f or ending calls or for cancelling functions and returning to the "on" status immediatel y . The currently selected (highlighted) function is display e d on a dark background . A dotted line indicates the end of the menu. If you scroll ...
-
Siemens Hicom cordless EM - page 15
15 Putting the mobile unit into service . ● Hold the mobile unit with the dialling keypad facing downwar ds (see Figure 2 ). A battery compar tment f or 2 batteries is locate d in the lower par t of the m obile unit. ● T o open the battery compar tment, undo the s crew on the lid and remove the lid (see Figure 2 ). ● Inser t the two batteries ...
-
Siemens Hicom cordless EM - page 16
16 Putting the mobile unit into service The batteries supplied (NiCd) are not charg ed. To charge the b atteries , inse rt the mo bile unit in the Giga set 2000L charging s hell. The mobile unit can be ins erted with the display fa cing upwards or downwards. The LED on the charging shell light s up while the bat- teries are charging. In addi tion, ...
-
Siemens Hicom cordless EM - page 17
17 Putting the mobile unit into service Mobile unit batter y life: These times are onl y achie ved after several charging and discharging cyc les. Permitted batteries f or the standard version (industrial mobile unit): Pe rmitted batteries for the Ex version: P er mitted batteries for Gigaset active Ex are listed on page page 67. Capacity Standby m ...
-
Siemens Hicom cordless EM - page 18
18 Note on using NiMH batteries: After you ha ve inser ted the NiMH batteri es, we recom- mend that the m obile unit be ful ly charged and th en dis- charged until the bat ter y war ning beep is heard, i.e. without replac ing the batter ies in the ch arging shell. T his ensures that the charge status display 7 of the mobile unit is adapted to th ...
-
Siemens Hicom cordless EM - page 19
19 Putting the mobile unit into service . For information on setting the language, see page 57 . Y our system admi nistrator supplie s you with mobile units that hav e already been logged on when you are installing the system f or the first ti me. Y ou mu st log on any n ew mobile units as described belo w if you e xtend the system. ● Please call ...
-
Siemens Hicom cordless EM - page 20
20 Putting the mobile unit into service e.g . H ... Enter the mobile unit system code (eight-digit) and conf irm the entr y with the displa y ke y – * symbols ar e dis- play ed instead of dig its. if necessary , press the disp la y keys and to correct an entr y . -! *, f o r e xample, is displa yed. The mobile unit is su cces sf ...
-
Siemens Hicom cordless EM - page 21
21 ● Off status: displa y clear – calls are not received! ● On status: e.g. -! is displ ay ed – prerequisite f or all telephon e functions , normal operating status! Activating the mobile unit: H Press the On/Off key – you hear the confir mation be ep. Display when telephone is in t he "on" status, see page 11 . Deac ...
-
Siemens Hicom cordless EM - page 22
22 T elephone functions This display when the mobile is on is a prerequisit e and init ial status for all telephone functions (se e also ”Radio range” page 9). -! H , , , , or an other name may be dis- played (see page 49) depending on the current base (system). C Press the talk key - the user’ s own mobile phone number ...
-
Siemens Hicom cordless EM - page 23
23 C Press the talk key - the user’ s own mobile unit numbe r appears in the d is- play . External code e.g . G Enter the external code, e.g. "0" , when you hear the dial tone . O Dial the external number - the entered digits are d isplay e d. See also Note! Call Conduct the ca ll. Ending a call A Press the on-hook k ey or place the mob ...
-
Siemens Hicom cordless EM - page 24
24 T elephone functions Bloc k dialling means that y ou enter the number first (up to 32 digits), if n ecessar y correct it a nd then press the talk key to dial. O Enter the inter nal number or "external code", e.g. " 0 " and the e xternal number . If necessar y , use the and displa y keys to co rrec t the entries. C Press the t ...
-
Siemens Hicom cordless EM - page 25
25 T elephone functions . Y ou have dialled a number, b ut the other par ty is busy or does not answer: pres s the on-hook key. The last five numbe rs dialled (up to 32 digits) are alwa ys stored auto- matically. Dialling a stored number Press the displa y key - the fir st three stored nu mbers are displa yed . If necessary , press the displ a y ke ...
-
Siemens Hicom cordless EM - page 26
26 Switching functio ns Editing a number Press the displa y key . Scroll to the de sired number . Press the displa y key . Scroll to ;.(!, and confir m. Edit number . Press the displa y key . Confirm ?/!),2 – ),2(* "! is displa yed for appro x. two s econds. Deleting a number Press the displa ...
-
Siemens Hicom cordless EM - page 27
27 Switching functio ns Prerequisite: The required function i s set up! If a dialled internal user is busy or if your call is not answ ered, you can program an automatic ca llback request. Storing a callback request: 4 Press the recall k ey . O Enter the code. Deleting stored callback requests: ~ Enter the code. Y ou answered an e xte r ...
-
Siemens Hicom cordless EM - page 28
28 Switching functio ns Y ou are conducting an interna l or external call and would like to obtain som e information from an inter nal or external us er: 4 O Press the recall k ey , immed iately dial the number of the sub scriber a nd con- duct the cons ultation ca ll. Ending a consultation: 4 Press the recall k ey . Y ou can shuttle b etween t ...
-
Siemens Hicom cordless EM - page 29
29 This function allows you to set up a telephone co nference with up to five users . Y ou are conduc ting a call and wi sh to set up a tel ephone conference with a fur t her user : 4 O Press the recall k ey and immediatel y dial the nu mber of the subsc riber . 4 Press the recall k ey . O Enter the code for "conf erence" – the c ...
-
Siemens Hicom cordless EM - page 30
30 Switching functio ns Like oth er Hicom tel eph ones , the mobile unit allows y ou to perf orm the following functio ns by entering codes . The codes in yo ur sy stem may de viate from the standard codes speci- fied here . Consult you r system administr ator if y ou hav e any queries about the codes in your syste m. The confirmat ion to ne in dic ...
-
Siemens Hicom cordless EM - page 31
31 Switching functio ns Associated dialling Set up connections for other telephones. * 67+ Pa r tn e r + ph. no . Override (Short cut) Override and speak in a busy connection. * 62 Baby alarm, Room monitoring (system) For the acousti c monitoring of a specific room. * 88 Reset services for own base Reset activated functions. # 0 V oice ca lling Com ...
-
Siemens Hicom cordless EM - page 32
32 Switching functio ns DTMF dialling (tone dialling) (Shor t cut) T ransmit DTMF signals . * 53 Night service on off Dive rsi on of all calls to a fixed destination. * 44+ * or ph. no. # 44 Park (Short cut) Unpark Hold call and resume at di fferent telephones. * 56+park pos. # 56+park pos. Pag e Answer Locating person using assigned poc ket receiv ...
-
Siemens Hicom cordless EM - page 33
33 Switching functio ns * If activated (cons ult your system administrat or if necessary). ** You can ent er the codes that are valid for your system in this column. Switch actuation, on off T o s witch on/off certain devices (e .g. relay) . * 90 # 90 Recall to network (flash) T o allows features t o be used in ana- logue lines, a signal m ust be t ...
-
Siemens Hicom cordless EM - page 34
34 T elephone directory Y our mobile un it has a telephon e director y for storing up to 100 numbers, see also Note o n page 44. The stored num- bers can be simp ly dialled, mo dified or delete d at any time. Access to the teleph one director y is locked if the mobile unit is locked. Three of f our letters/characters ar e a ssigned to each digi t k ...
-
Siemens Hicom cordless EM - page 35
35 T elephone directory Overview – key la yout ● Enter the telephone number (2nd and 3rd line) ● When you hav e en tered the name, press the display ke y and enter the t elephone number (up to 32 digits) using the digi t ke ys. ● Correcting/deleting entries (1st, 2nd and 3 rd line) The cursor is mo ved from characte r to ch aracter in wr ap ...
-
Siemens Hicom cordless EM - page 36
36 T elephone directory Press the displa y k ey – the directory is displayed . Press the displa y key . Press the displa y keys to scroll to ;!0),2 and confir m. Name Enter the name (1st line only , max. 16 charac ters). Enter letters/digits and correct if necessar y , s ee page 34 and 3 5. Switch to number entr y . T elephone number ...
-
Siemens Hicom cordless EM - page 37
37 T elephone directory Inserting a function: Y ou can enter a pause, e.g. f o llowing an internation al prefix, when yo u are entering the telephone n umbers. Press the displa y key . Scroll until 7)-! ,.)*) is selected and confirm the selec tion. Press <.-! – a "P" is inser ted into the phone number. Disp ...
-
Siemens Hicom cordless EM - page 38
38 T elephone directory Prerequisite: Number is stored and mobile unit is "on" – no connection is set up (idle). Press the displa y k e y – the first names (alphabetical order) in the teleph one director y ar e display ed, the name in the first line i s selected (dimm ed) . or e.g . Scroll to the de sired name or enter the initia ...
-
Siemens Hicom cordless EM - page 39
39 T elephone directory The stored entries – n umbers and/or names – can be edited, deleted or displayed. Press the displa y k e y – the first names are displayed . Scroll to the de sired entr y . ● Editing an entry: Press the d is pla y ke y . Scroll to ),2 and confir m. e.g . Name flashes. Change the name , f or example ...
-
Siemens Hicom cordless EM - page 40
40 T elephone directory Y ou can also delete all of the entries in the entire telephone directory in one go , e . g. if y ou are lendi ng the mob ile unit to another user. This function is also protec ted by the mobile unit PIN. Press the displa y key . Press the displa y key . Scroll to !'!!,!*,2 and confir m. PIN Enter t ...
-
Siemens Hicom cordless EM - page 41
41 Main menu – functions Incoming calls are sign alled and can be accepted or, f or ex ample , forw arded to another te lephone. The follo wing are block ed when the hand set is locked: – Dialling inter nal and external numbers – Access to t he telephone d irector y – Block dialling – Function menu ca ll up (e xc ept f or "Cancel Han ...
-
Siemens Hicom cordless EM - page 42
42 Main menu – functions DSS number f or locked mobile unit Y ou can store one extern al DSS number (direct stati on selection number) which can be di alled if the mobil e unit is lock ed. The DSS number can b e, f or example, a number at which you can be reached if you are absent from the mobile. Displaying or storing a DSS number Press the ...
-
Siemens Hicom cordless EM - page 43
43 Main menu – functions Shor t cuts ma ke it easier to perform "longer" operating sequences, e.g. automatic c allback or other code func tions. Store a function (operating se quence) under a name of your choice. The name of the function is inc luded in the li st of shor t cuts. Y ou can e xecut e the function quic kly by confirm- ing t ...
-
Siemens Hicom cordless EM - page 44
44 Main menu – functions Switch to entering the shor t cut contents. 4 Press the recall k ey . O Enter the code " * 58". Press the displa y key . Confirm ?/!),2 . Starting a shor t cut The star t proc edure is specific to the mobile un it status: Starting from the "on" status Press the men u key . Scroll ...
-
Siemens Hicom cordless EM - page 45
45 Main menu – functions If your mobile unit is log ged onto more than one base (DECT systems*), you can set it to a par ticul ar base or "best base" (automatic base c hangeover). Setting the base Press the men u key . Scroll to ?!'!-! and confir m. e.g . If necessar y , sc roll to the required base. Press the di ...
-
Siemens Hicom cordless EM - page 46
46 Main menu – functions Prerequisite: Y ou ha ve selected a spe cific base as described abo ve and hav e c alled up the sub menu . The displa y shows: 9 T o activate, press the displa y key . 9 9 [ ; < <,*,2?!'!N 1! ?!'!*) RRRRRRRRRRRRRRRR ...
-
Siemens Hicom cordless EM - page 47
47 Settings Overview – settings Setting Explanation/notes Level Default Handset Vo l u m e Call volume; Level 1 is not shown in the display! 31 Ringer Options – volume – tone V olu me and tone (call signal, bell) Low to high or ringer o ff Set tone frequency 6 0 10 6 2 Register see page 19 – – Base Settings see page 49 –– Handset Sett ...
-
Siemens Hicom cordless EM - page 48
48 Settings Press the men u key . Scroll to ?!)#- and confir m. F or an e xplanation of the indivi dual settings, se e the section entitled "Overview – settings", page 47. Example: Setting the r inger volume Press the men u key . Scroll to ?!)#- and confir m. Scroll to >)#!,*)- and confir m ...
-
Siemens Hicom cordless EM - page 49
49 Settings Y ou can rename th e preset base names "Base 1" thro ugh "Base 6". Within a co mpany , for e xample, ba se 1 could be changed to "Plant 1" and b ase 2 changed to "Plant 2". Changing the base name Press the men u key . Scroll to ?!)#- and confir m. Scroll to -!?!)#- a ...
-
Siemens Hicom cordless EM - page 50
50 Settings ISDN configuration Not relev ant for cordless EM. De-registering a base The mobile un it sh ould not be de-registered! Attention! If the mobile unit is de-registered, it mu st be re- registered agai n a s when putting i t into service, bef o re it can be used ag ain (see page 19)! ...
-
Siemens Hicom cordless EM - page 51
51 Settings Overview – handset settings Setting Explanation/notes Level Default Beeps see page 52 – – Aut o Backlight The backlight is s witched on when the first ke y is pressed. The backlight is automati- cally switched off to sa ve the batteries if the tele phon e is not used f or 15 seconds . On/Off On Auto T alk Y ou can define whether t ...
-
Siemens Hicom cordless EM - page 52
52 Settings Overview – beeps Beep type Explanation, note Default Key Beeps Au dible each time a k ey is pressed . On Batt. Low Beep A udible appro x. 5 minute s be fo re the batter y r uns out. On Range W arning Audible when you leav e th e radio range. Off Confirm Beep A udible if a local functi on/set- ting was successfully per- for me d . On E ...
-
Siemens Hicom cordless EM - page 53
53 Settings Press the men u key . Scroll to ?!)#- and confir m. Scroll to 6) -!?!)#- and confir m. Confirm !!- . F or an e xplanation of the indivi dual beeps, see "Overview – Beeps", page 52. Example: Activating/deactivating the range warni ng Scroll to >)#!C,))# and confir m. or P ...
-
Siemens Hicom cordless EM - page 54
54 Settings The stored default select services – operating se quences for T elecom ser vices – cannot be used with cordless EM. Saving functions under F requently used functions (oper a ting sequence s) that are started when the mobile is in the "on" status can be stored "under" the displ ay ke y . This will simplify op erat ...
-
Siemens Hicom cordless EM - page 55
55 Settings PIN Enter the mobile unit PIN and confir m. Press the displa y ke y – ''!),!- !'!! is displa yed f or appro x. 2 seco nds. or Return to the higher-level displa y . Deactivating the displa y If you ha ve not sa ved any othe r op erating sequ ences under , it is advisable to deactivate the select ...
-
Siemens Hicom cordless EM - page 56
56 Settings Y ou can use t his function to chan ge your personal mobile unit PIN. The default PIN is " 0000 " . The mobile uni t PIN is required for the follo wing functions: – changing the mobile unit PIN – deleting the te lephone director y – resetting the m obile unit to the default state Press the men u key . Scroll to ?! ...
-
Siemens Hicom cordless EM - page 57
57 Settings Prerequisite: The mobi le unit is on (Ger man default state*!) Press the men u key . Scroll to ?!)#- and confir m. Scroll to 6) -!?!)#- and confir m. Scroll to :)#.#! and confir m. e.g . Scroll to desire d language and confir m. The f ollo wing overview will help you to set the desired lan- guage as ...
-
Siemens Hicom cordless EM - page 58
58 Settings Y ou can use t his function to reset your mobile unit to the defined default state, e.g. if you are handing over your mobile unit to another user . Press the men u key . Scroll to ?!)#- and confir m. Scroll to 6) -!?!)#- and confir m. Scroll to 7)'3*) and confir m. PIN Enter th ...
-
Siemens Hicom cordless EM - page 59
59 Settings Settings after the mobile unit has been reset: T elep hon e dire cto r y: Retained Short cuts: Retained Redial: Deleted Mobile unit PIN: As per last save System registrati on: Retained Language: Ger man* A utomatic call acceptance: On Automatic backlight: On Select Services menu: Activ e* Ringer tone: 1 Ringer volume: 6 Handset volume: ...
-
Siemens Hicom cordless EM - page 60
60 Appendix Before contacting the Ser vice dep ar tment, you should attempt to rectify a ny er rors yourself: T roubleshoot ing Caution: The battery compar tment must not be opened under any ci rcu mstances in a n Ex zone . Error P ossible cause Remedy No display . Mobile unit not switched on. Battery e mpty . Press the On/Off key . Recharge the ba ...
-
Siemens Hicom cordless EM - page 61
61 Appendix The mobile units have been approved by the Ger man Fed- eral Office of T elecomm unication Appro val (BZT). They comply with the conditions o f approval passed by the Fed- eral Ministr y for P ost and T elecommuni cat ion s (BMPT) for connection to the Hicom cordless EM telephone system. They can also be regis tered and op erated on the ...
-
Siemens Hicom cordless EM - page 62
62 Appendix Acoustic signals Steady tone Internal dial tone Confirmation tone Busy tone Ring tone External dial tone Error beep/range warning Beep Beep Beep Pa u s e Beep Pa u s e 0.2 s/0.3 s beep/paus e, sequence repeated a fter 0.5-s paus e 0.8 s 2 s 0.5 s beep/ pause 0,8 s 4 x 0.1 s beep/paus e ... ... Call waiting tone 0.1 s 0.1 s 10 s Pause ...
-
Siemens Hicom cordless EM - page 63
63 ● Gigaset 2000H headse t Comprising an adap ter and headset. Note : high-perf ormance nick el-metal -hydride batteries a re recommended for use in conju nction with the hea dset. ● Gigaset 2000L charging unit For charging the mobile unit ba tteries a nd 2 spare batte ries. Fur ther inf or mation av ailable on reques t. Please contact y our n ...
-
Siemens Hicom cordless EM - page 64
64 A Accessories ............. .............. 63 Acoustic sign als ................. ... 62 Activating/de activating the mobile un it ............... ... 21 Actuate switc h ..... .................. 33 Answer ................ .................. 32 Answer group ...... .................. 32 Answering a call .......... ... ....... 23 Approval ......... ...
-
Siemens Hicom cordless EM - page 65
65 Index DSS number deleting ........... .................. 42 displaying ............ .............. 42 storing .......... .................. ... 42 DTMF diallin g ...... .................. 32 Duplicate entry ........ .............. 37 E Editing entry ......... ............... .......... 39 Editing an e ntry ..................... 39 Ending a ca ll ...
-
Siemens Hicom cordless EM - page 66
66 Index O On status .......... ... ............ 11, 22 Operating ele ments ........ ......... 3 Operating sta tus ............. ....... 21 Override ........... .............. ....... 31 Overview beeps .............. ............... ... 52 handset setting s .. .... ... ....... 51 main menu ...... .................. 41 settings ........ ............ ...
-
Siemens Hicom cordless EM - page 67
67 Only the or iginal batter y packs C391 65-A7019-B110 and C39165-A7019-B 112 may be used with Gi gaset active Ex. If other batteries are used, oper ation i n en viro nments where there is dang er o f e x plosion is no longer permitted. Gigaset activ e Ex al so complies w ith the requirements of the follo w ing european sta ndards: Capacity Standb ...
-
Siemens Hicom cordless EM - page 68
F or sales queries: In the ev ent of an error : When passin g on the device enter the following telephone numbers: Printed on recycled paper – doing more for the environment! This dev ice complies with the requirement s of the EU guidelines: 89/336/EEC “Electromagnet ic Compatibility” 73/23/EEC “Electric Operating Resources for Use within S ...
Haben Sie eine Frage bezüglich Siemens Hicom cordless EM?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Siemens Hicom cordless EM nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Siemens Hicom cordless EM hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.