-
TP-Link TL-PA4010P - page 1
TL-P A4010P A V500 Powerline Adapter With AC Pass Through Rev: 1.0.0 1910010757 ...
-
TP-Link TL-PA4010P - page 2
COPYRIGHT & TRADEMARKS S pecifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specificat ions may be reproduced in any form or by any means or used to make any derivative ...
-
TP-Link TL-PA4010P - page 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digita l device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa tion. This equipment genera tes, uses and can radiate radio frequency energy and, if n ...
-
TP-Link TL-PA4010P - page 4
TP-LINK TECHNOLOGIES CO., L TD Safety Information When product has power button, the power button is one of the way to shu t off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Don’t disassemble the product, or make repairs yours ...
-
TP-Link TL-PA4010P - page 5
TP-LINK TECHNOLOGIES CO., L TD DECLARA TION OF CONFORMITY For the following equipment: Product Description: A V5 00 Powerline Adapter With AC Pass Through Model No.: TL-P A4010P T rademark: TP-LINK We declare under our own responsibilit y that the above pro ducts satisfy all the technical regulations applicable to the product within t he scope of C ...
-
TP-Link TL-PA4010P - page 6
CONTENTS Package Contents ......................................................................................... 1 Conventions .................................................................................................. 1 Chapter 1 Introduction ................................................................................. 2 1.1 System R ...
-
TP-Link TL-PA4010P - page 7
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 1 Package Contents The A V500 Powerline Ada pter With AC Pass Through package contains the following items: One A V500 Powerline Adapter With AC Pass Through (There are two powerline adapters in S tarter Kit) One RJ-45 Cable (There are two RJ-45 Cables in S tarter Kit) One Quic ...
-
TP-Link TL-PA4010P - page 8
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 2 Chapter 1 Introduction This device is an A V500 Powerline Adapter With AC Pass Through which transforms your house’s existing electrical wiring into a ubiquitous networking infrastructure. Simply plug this A V500 Powerline Adapter With AC Pass Through into an ordinary AC power outlet w ...
-
TP-Link TL-PA4010P - page 9
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 3 between this product and the AC power source. 9. When pluggi ng this product into a wall socket, make sure that the electric al socket is not damaged, and that there is no gas leakage. 10. Place the connecting cables properly so that people won’t stumble or walk on it. 11. This product ...
-
TP-Link TL-PA4010P - page 10
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 4 Solid The Ethernet port is connect ed, but there is no data being transferred. Blinking The Ethernet port is transferring data. Ethernet LED Off The Ethernet port isn’t connected. Note: 5 minutes after the devic e connected to the adapter is turned of f, and the adapter will automa ...
-
TP-Link TL-PA4010P - page 11
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 5 Note: 1. If you press the pair button for more than 10 se conds, the powerline adapter will leave the network which it has joined and its new network name assu mes a random value. The Power LE D turns off temporarily when it disconnects from the powerline network. 2. For detailed inf ...
-
TP-Link TL-PA4010P - page 12
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 6 Chapter 2 Connecting Mechanism 2.1 Introduction The Powerline Adapter supports up to 500Mbps data ra te. With this high speed connection rate, this Powerline Adapter allows you to set up a high speed home network b y using your home existing electrical wiring. Simply plug this Powerline ...
-
TP-Link TL-PA4010P - page 13
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 7 2.3 Hardware Connection – Computer For those computers you wish to be networked by Powerline Adapter , each of the computers must be properly connected with a Powerline Adapter through an Ether net (RJ-45) cable. Following are the steps to properly connect the Powerline Adapter to your ...
-
TP-Link TL-PA4010P - page 14
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 8 2.4 Hardware Connection – Internet This section describes how to connect the Power line Adapter into your existing ADSL broadband connection via ADSL Ethernet port. Follow the proc edures described below to connect the Powerline Adapter to your ADSL broadband connection: 1 ． Connect ...
-
TP-Link TL-PA4010P - page 15
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 9 Chapter 3 Inst alling Management Utility Please verify that no other Power line Adapter or any Encryption M anagement Utilities are installed before installing the provided software. If other Power line Utilities are installed, uninstall them and restart your personal computer before ins ...
-
TP-Link TL-PA4010P - page 16
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 10 ...
-
TP-Link TL-PA4010P - page 17
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 11 ...
-
TP-Link TL-PA4010P - page 18
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 12 S tep 3: After the inst allation, a shortcut to the “Po werline Utility” application icon is provided o n the windows desktop. ...
-
TP-Link TL-PA4010P - page 19
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 13 Chapter 4 Using the Management Utility After you’d successfully installed the Powerline A dapter hardware and Managem ent Utility software, you can set up or configure the devic es according to your need. This Powerline Utility enables the users to i dentify powerline devices on the p ...
-
TP-Link TL-PA4010P - page 20
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 14 MAC Address: Displays the MAC address of the pow erline adapter connected to the current computer where this m anagement utility is running. Network Name: Displays the network name of the current network or you can give a n ame for the network in which the powerline adapter is. ...
-
TP-Link TL-PA4010P - page 21
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 15 Typ e: Displays the type of the remote device found in the network. Name: Displays the name of the remote device found in the network. Y ou can chang e its name following two steps: select the desired adapter and click the Modify button. MAC Address: Displays the MAC address ...
-
TP-Link TL-PA4010P - page 22
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 16 (2) Enter a new name for the selected adapter and enter its password (Take note of the password format). The password can be found on the back of adapter. (3) Click the Save button to make the settings effective. Note: Password is unnecessary to enter for renaming. 4.2.2 Add Device ...
-
TP-Link TL-PA4010P - page 23
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 17 4.3 Advanced The third tab window labeled “ Advanced ” is for Quality of Service. With the prop er configuration, the limit bandwidth can be took full advantage. QoS requirem ents are dif ferent for various data types such as streaming video or music, voice and ra w data. T o provid ...
-
TP-Link TL-PA4010P - page 24
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 18 4.4.1 Upgrade Firmware Click the Upgrade Firmware button to upgrade the version of t he firmware for the adapter and the following dialog will pop up. NVM : None-volatile memory. It is us ed for upgrading the firmware. PIB : Parameter Information Block. It contains configuration ...
-
TP-Link TL-PA4010P - page 25
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 19 Note: The parameter information of PIB will restore to the factory default s af ter resetting the PLC. T o upgrade the device's firmware, follow these instructions: 1. Download PIB file and firmware upgr ade file from the TP-LINK website ( www .tp-link.com ). 2. Enter the path ...
-
TP-Link TL-PA4010P - page 26
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 20 Chapter 5 Advanced Feature: How to Use the Pair Buttons 5.1 Pair (Secure with 128 bits-AES) The Homeplug A V standard uses 12 8-bit AES (Advanced Encryption S t andard) to safely transmit data between powerline adap ters. For the powerline adapter s to communicate with each other they a ...
-
TP-Link TL-PA4010P - page 27
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 21 Join an existing secured Powerline A V Network: Powerline adapter A and Powerline ad apter B form a HomeplugA V Network, Powerline adapter C wants to join this network. Ste p 1 . Press and hold the Pair button on Powerline adapter C for one second. Ste p 2 . Press and hold the Pair butt ...
-
TP-Link TL-PA4010P - page 28
TL-P A4010 P A V500 Powerline Adapter W ith AC Pass Through 22 Appendix A: T roubleshooting The Troubleshooting provides answers to comm on problems regardin g the Powerline Adapter. 1. The Power LED does not light up. Ans. Check the following: a) Make sure that the Powerline Adapter is properly plugged into a power outlet. b) Make sure the power o ...
Haben Sie eine Frage bezüglich TP-Link TL-PA4010P?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit TP-Link TL-PA4010P nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit TP-Link TL-PA4010P hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.