-
Topcom 4001G - page 1
S S k k y y r r @ @ c c e e r r U U S S B B 4 4 0 0 0 0 1 1 g g Full User Guide ...
-
Topcom 4001G - page 2
...
-
Topcom 4001G - page 3
CONTENTS 1.1 Features ......................................................................................................................... 2 1.2 Specifications ................................................................................................................ 2 1.3 Package Contents ................................................. ...
-
Topcom 4001G - page 4
1 Introduction Thank you for purchasing the 802.11g Wirel ess LAN USB Adapter. This USB adapter is de si gned to comply with IEEE 802.11g Wireless LA N standard and easy to carry with the Mini size. It is suitable for any Laptop or Desktop computers. This adaptor supports higher data throughput than the IEEE 802.11g standard (up to 54Mbps). It supp ...
-
Topcom 4001G - page 5
1.1 Features • Complies with the IEEE 802.11b and IEEE 802.11g 2.4GHz (DSSS) standards. • High data transfer rate – up to 54Mbps. • Supports Turbo Mode to enhance the data transfe r speed within the specific wirel ess network. • Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x) functions for high level of s ...
-
Topcom 4001G - page 6
1.3 Package Contents Before you begin the inst a llation, please check the ite ms of your p ackage. The packag e should include the following items: • One USB Adaptor • One CD (Driver/Utility/User’s Manual) 3 ...
-
Topcom 4001G - page 7
2 Installation Procedure Before you proceed with the inst all ation, please notice following descriptio ns. Note1: Please do not install the adaptor into your computer be fore ins talling the software program from the CD. Note2: The following installation was operated under Windows XP. (Procedures are similar for Windows 2000/2003 Server.) Note3: I ...
-
Topcom 4001G - page 8
C. If you need the adaptor to operate with better pe rformance, please choose the “Optimi ze for performance” to enable the Tx Burst mode. Or you ca n choose “Optimize for Wi-Fi mode” to le t the adaptor run in st an dard wireless netwo rk. 5 ...
-
Topcom 4001G - page 9
D. The system start s to install the sof tware of the adaptor . Please follow the instructions of the program to plug in the adaptor into the USB port of your computer . And the system will automatically detect the adaptor E. Please click “Finish” to complete the installation. 6 ...
-
Topcom 4001G - page 10
3 Configuration Utility The Topcom Configuration Utility is a powerful a ppl ication that helps you configure the USB adaptor and monitor the link status and the statis tics during the communi cation process. When the adaptor is installed, t he configuration utility will be displayed automatically. This adaptor will auto connect to wireless device ...
-
Topcom 4001G - page 11
3.1 Site Survey When you open the Topcom Configuration Utility, t he system will scan all the ch a nnels to find all the access points/stations within the acce ssible range of your ad aptor and automatically connect to the wireless device with the highest sign al strength. Fr om the “Site Survey”, a ll the networks nea rby will be listed. You c ...
-
Topcom 4001G - page 12
3.2 Profile The “Profiles List” is for you to manage the netwo rks you con nect to frequently. You are able to Add/Delete/Edit/Activate a profile. Parameter Description Profiles List The profiles list display all the profiles and the relative setting s of the profiles including Profile Name, SSID, Cha nnel, etc. This sign indicates the activate ...
-
Topcom 4001G - page 13
3.2.1 Configure the Profile 3.2.1.1 Configuration Parameter Description Profile Name Define a recognizable profile name for you to identify the dif ferent networks. SSID The SSID (up to 32 printabl e ASCII characters) is the unique name identified in a WLAN. The ID prevent s the uni ntentional merging of two co-located WLANs. Y ou may specify a SSI ...
-
Topcom 4001G - page 14
Parameter Description PSM (Power Saving Mode) The power saving func tion is only availab le whe n the network type is in Infrastructure. CAM (Const antly A w ake Mode) – T he adaptor will always set in active mode. PSM (Power Saving Mode) – Enable the adaptor in the power saving mode when it is idle. Network T ype Infrastructure – This operat ...
-
Topcom 4001G - page 15
Parameter Description RTS Threshold Minimum packet size requi red for an RT S (Request T o Send). For packet s smaller than this threshold, an RTS is not sent and the packet is transmitted direct ly to the wireless network. Select a setting within a range of 0 to 2347 bytes. Minor chang e is recommended. Fragment Th reshold The value defines the ma ...
-
Topcom 4001G - page 16
Parameter Description Authentication T ype LEAP – LEAP is a pre-EA P , Cisco-proprieta ry protocol, with many of the features of EAP protocol s. Cisco controls the ability of other vendors to implement this protocol, so it shoul d be selected for use only when limited vendor choice for client, access-point, and server products is not a co nce rn. ...
-
Topcom 4001G - page 17
Parameter Description Encryption Mode None – Disable the encryption mode. WEP – Enable the WEP Data Encryption. When the i t em is selected, you have to continue setting the WEP Encryption key s. TKIP – TKIP (T emporal Key Integrity Protocol) changes the temporal key every 10,000 packets (a p acket is a kin d of message transmitted over a net ...
-
Topcom 4001G - page 18
The IEEE 802.1X specification describe s a protocol that can be used fo r authenticating both clients and servers on a network. The authentication algorithm s and methods are those pro vided by the Extensible Authentication Protocol (EAP), a method of authentic ation that has been in use for a number of years on networks that provide Point-to-Poi n ...
-
Topcom 4001G - page 19
3.2.1.3 802.1x Setting-Certification Parameter Description Authentication T ype The EAP authentication pr otocol s this a daptor has supporte d are included as follows. This setting has to be consistent with the wireless APs or Routers that the adaptor intends to connect. PEAP &TTLS – PEAP and TTLS are similar and easier than TLS in that they ...
-
Topcom 4001G - page 20
Parameter Description T unneled Authentication Protocol When the authentication type is PEAP or TTLS, select a protocol to be used to build the encrypted tunnel. Identity This is the protected us er EAP Identity used for authentication. The identity specified may contai n up to 63 ASCII characters, is case sensitive and ta kes the form of a Network ...
-
Topcom 4001G - page 21
Parameter Description Allow Intermediate Certificates A server desi gnates an issuer as a trusted root authority by placing the issuer's self-signed ce rtificate, which co ntains the issuer's public key, into the tr usted root certification authority certificate store of the host comp uter. Intermediate or sub ordi nate certification auth ...
-
Topcom 4001G - page 22
Parameter Description S tatus Display the SSID and MAC ID of the network the adaptor is connecting to. Extra Info Display the link st atus. Channel Display the number of the radio channel and the freq uency used for the networking. Link S peed (Mbps) Display the transmission and reception rate of the network. The maximum transmissi on rate is 54Mbp ...
-
Topcom 4001G - page 23
3.4 Statistics This option enables you to view the statistic informat ion of the con nectio n including transmit statistics and receive statistics. You may reset the counters by clickin g ”Reset Counter”. 3.5 Advance This option enables you to configure mo re advan ced settings, for example: wireless mode, protection mode and etc. 20 ...
-
Topcom 4001G - page 24
Parameter Description Wireless Mode 802.1 1 B/G mix – If you have a mix of 802.1 1b and 802.1 1g wireless st ations in you r networ k, it is recommended to set the adaptor to this mode. Thi s mode is also the default setting. 802.1 1 B only – This adaptor can be comp atible with both 802.1 1g and 802.1 1b wireless stations. If there are only 80 ...
-
Topcom 4001G - page 25
Parameter Description Enable TCP Window Size The TCP Window i s the amount of data a sender can send on a particular connectio n before it get s an acknowledgme nt back from the receiver that it has gotten some of it. When the Router or AP the adaptor is connecting to have s et up the TCP Win dow , you can enable the paramete r to meet the data siz ...
-
Topcom 4001G - page 26
3.6 About By choosing this option, you can click the hyperlin k to connect the website for the informatio n of the wireless chipset vendor and review b asic informat ion about the Utili ty such as the Driver, Utility and EEPROM Version. The MAC Address of the adaptor is displayed in the screen as well. 3.7 Turbo Mode This adaptor supports spe cific ...
-
Topcom 4001G - page 27
24 ...
-
Topcom 4001G - page 28
4 Troubleshooting This chapter provides solutions to pro blems us ually encountered during the inst allation and operatio n of the adapter . 1. What is the IEEE 802.1 1g st andar d? 802.1 1g is the new IEEE standard fo r high-speed wireless LAN comm unications that provides for up to 54 Mbps dat a rate in the 2.4 GHz band. 80 2.1 1g is quickly beco ...
-
Topcom 4001G - page 29
6. What is BSS ID ？ A specific Ad hoc LAN is called a Basic Service Set (BSS). Computers in a BSS must be configured with the same BSS ID. 7. What is WEP ？ WEP is Wi re d Equivalent Privacy , a data pr ivacy mechanism based on a 40 bit shared key algorithm, as described in the IEEE 802 .1 1 standard. 8. What is TKIP? TKIP is a quick-fix method ...
-
Topcom 4001G - page 30
13. What is Spread S pectrum ？ S pread S pectrum technol o gy is a wideband radio frequen cy technique developed by the milit ary for use in reliable, secure, missi on-critical communication system s. It is designed to trade of f bandwidt h ef ficiency for reliability , integrity , and security . In other words, more bandwid th is consumed than i ...
Haben Sie eine Frage bezüglich Topcom 4001G?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Topcom 4001G nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Topcom 4001G hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.