-
Invacare Wheelchair Pronto M61 - page 1
Owner’s Operator and Maintenance Manual DEALER: This manual MUST be given to the user of the product. USER: B E F OR E u s i n g t h i s product, read this manual and save for future reference. For more information regarding Invacare products, parts, and services, please visit www.invacare.com Pronto ® M51 ™ and M61 ™ with SureStep ® ...
-
Invacare Wheelchair Pronto M61 - page 2
REFERENCE DOCUMENTS Pronto® M51™and M61™with SureStep® 2 Part No 1125085 WARNING A qualified technician MUST pe rform the initial se t up of this wheelchair. Also, a qualified technician MUST perform al l procedures in the service manual. DO NOT use this product or any availa ble option al equipmen t without fir st completely reading and ...
-
Invacare Wheelchair Pronto M61 - page 3
TABLE OF CONTENTS Part No 1125085 3 Pronto® M51™and M61™with SureStep® TABLE OF CONTENTS REFERENCE DOCUMENTS ................................................................. 2 REGISTER YOUR PR ODUCT ............................................................... 4 SPECIAL NOTES ................................................................ ...
-
Invacare Wheelchair Pronto M61 - page 4
TABLE OF CONTENTS Pronto® M51™and M61™with SureStep® 4 Part No 1125085 TABLE OF CONTENTS SECTION 8—FOOTBOARD ASSEMBLY .............................................. 45 Removing/Installing the Footboard Assembly .................... ............................................. ...................4 5 Adjusting the Footboard Assembly ........ ...
-
Invacare Wheelchair Pronto M61 - page 5
SPECIAL NOTES Part No 1125085 5 Pronto® M51™and M61™with SureStep® SPECIAL NOTES Signal words are use d in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage. Refer to the table ...
-
Invacare Wheelchair Pronto M61 - page 6
SPECIAL NOTES Pronto® M51™and M61™with SureStep® 6 Part No 1125085 WARNING CONTINUED The drive behavior initially experienced by the user ma y be differen t from other chairs previously used. This power wheelchair has Invaca re’s SureStep technology, a feature that provides the ch air with optimum traction and stability when driving for ...
-
Invacare Wheelchair Pronto M61 - page 7
LABEL LOCATION Part No 1125085 7 Pronto® M51™and M61™with SureStep® LABEL LOCATION M51 Wheelchairs M61 Wheelchairs Serial label located inside the wheelchair frame ...
-
Invacare Wheelchair Pronto M61 - page 8
TYPICAL PRODUCT PARAMETERS Pronto® M51™and M61™with SureStep® 8 Part No 1125085 TYPICAL PRODUCT PARAMETERS MEDIUM BACK SEMI-RECLINE BACK OFFICE STYLE, SEMI-RECLINE BACK ASBA SEAT WIDTH RANGE: 18 inches 16 inches 18 inches 20 inches 18 inches 16 to 20 inches SEAT DEPTH: 16 to 18 inches 16 to 18 inches 18 to 20 inches 16 to 18 inches 16 to 20 i ...
-
Invacare Wheelchair Pronto M61 - page 9
TYPICAL PRODUCT PARAMETERS Part No 1125085 9 Pronto® M51™and M61™with SureStep® *NOTE: Includes seating systems and accessories. **NOTE: Va l u e s for range are calculated for maximum chair weight rating us ing lar gest batteries applicable (U1), per test ...
-
Invacare Wheelchair Pronto M61 - page 10
SECTION 1—GENERAL GUIDELINES Pronto® M51™and M61™with SureStep® 10 Part No 1125085 SECTION 1—GENERAL GUIDELINES WARNING SECTION 1 - GENERAL GUIDELIN ES contai ns important inform ation for the safe operation and use of this product. Controller Settings/Repair or Service Set ‐ up of the Electronic Control Unit ...
-
Invacare Wheelchair Pronto M61 - page 11
SECTION 1—GENERAL GUIDELINES Part No 1125085 11 Pronto® M51™and M61™with SureStep® DO NOT operate on roads, streets or highw ays. DO NOT climb, go up or down ramps or trav erse slopes greater than 9°. DO NOT attempt to move up or dow ...
-
Invacare Wheelchair Pronto M61 - page 12
SECTION 1—GENERAL GUIDELINES Pronto® M51™and M61™with SureStep® 12 Part No 1125085 M61 Wheelchairs Only DO NOT operate wheelchair on an incline while in an elevated position. Otherwise, the wheelchair may tip over and inju ry or damag e may occur . B ...
-
Invacare Wheelchair Pronto M61 - page 13
SECTION 1—GENERAL GUIDELINES Part No 1125085 13 Pronto® M51™and M61™with SureStep® Grounding Instructions DO NOT , under any circumstances, cut or remov e the round grounding prong from any plug used with or for Inv acare products. Some de vices are ...
-
Invacare Wheelchair Pronto M61 - page 14
SECTION 2—EMI INFORMATION Pronto® M51™and M61™with SureStep® 14 Part No 1125085 SECTION 2—EMI INFORMATION WARNING CAUTION: IT IS VERY IMPORTANT THAT YOU READ THIS INF ORMATION REGARDING THE POSSIBLE E FFECTS OF ELECTROMAGNETIC INTERFERENCE ON YOUR POWERED WHEELCHAIR. Electromagnetic Interference (E MI) From Radio Wave Sources Powered ...
-
Invacare Wheelchair Pronto M61 - page 15
SECTION 2—EMI INFORMATION Part No 1125085 15 Pronto® M51™and M61™with SureStep® WARNING Powered Wheelchair Electrom agnetic Interference (EMI) Because EM energy rapidly becomes more intense as one moves closer to the transmitting antenna (source), the EM fi elds from hand-hel d radio wave sources (transceivers) are of special concern. I ...
-
Invacare Wheelchair Pronto M61 - page 16
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Pronto® M51™and M61™with SureStep® 16 Part No 1125085 SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS “Safety and Handling” of the wheelchair requires the close atte ntion of the wheelchair user as wel l as the assistant. This ...
-
Invacare Wheelchair Pronto M61 - page 17
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Part No 1125085 17 Pronto® M51™and M61™with SureStep® Coping With Everyday Obstacles WARNING DO NOT attempt to reach object s if you have to move fo rward in the seat or pick them up from the floor by reac hing down between your knees. Proper positioning is essent ial for your safety. When re ach ...
-
Invacare Wheelchair Pronto M61 - page 18
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Pronto® M51™and M61™with SureStep® 18 Part No 1125085 A Note to Wheelchair Assistants When assistance to the wheelchair user is required, remember to use good body mechanics. Keep you r back straight and bend your kne ...
-
Invacare Wheelchair Pronto M61 - page 19
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Part No 1125085 19 Pronto® M51™and M61™with SureStep® WARNING Pinch point may occur when adjusting the arm angle positi on (Detail “A”). Pinch point may occur when rotating the footboar d assembly (D etail “B”). FIGURE 3.3 Pinch Points Lifting/Stairways WARNING DO NOT attempt to move ...
-
Invacare Wheelchair Pronto M61 - page 20
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Pronto® M51™and M61™with SureStep® 20 Part No 1125085 NOTE: This procedur e needs two assistants to lift the wheelchair to transport it. 1. Remove the occupant from the wheelchair . 2. Remove the seat. Refer to Re ...
-
Invacare Wheelchair Pronto M61 - page 21
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Part No 1125085 21 Pronto® M51™and M61™with SureStep® NOTE: This activity may be performed independently pr ovided you have adequate mobility and upper body strength. NOTE: For this proced ure, refe r to FIGURE 3.5. 1 ...
-
Invacare Wheelchair Pronto M61 - page 22
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Pronto® M51™and M61™with SureStep® 22 Part No 1125085 Reaching and Bending - Backward WARNING DO NOT lean over the top of the back upholstery. This w ill change your center of gravity and may cause you to tip over. NOTE: For this proced ure, refe r to For this proc ...
-
Invacare Wheelchair Pronto M61 - page 23
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Part No 1125085 23 Pronto® M51™and M61™with SureStep® SECTION 4—SAFETY INSPECTION/ TROUBLESHOOTING NOTE: Every six months or as necessary take your wheelchair to a qualified dealer for a thor ough inspection and servicin ...
-
Invacare Wheelchair Pronto M61 - page 24
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Pronto® M51™and M61™with SureStep® 24 Part No 1125085 Inspect/Adjust Weekly ❑ Seat is secured to wheelchair frame. ❑ Seat and/or back upholstery hav e no rips and do not sag. Replace if necessary . ❑ Seat release ...
-
Invacare Wheelchair Pronto M61 - page 25
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Part No 1125085 25 Pronto® M51™and M61™with SureStep® Additional Requirement s for M61 Wheelchairs Inspect/Adjust Initially ❑ Make sure elevate operates smoothly and properly . ❑ Make sure elev ate systems drive with reduced speed when ? ...
-
Invacare Wheelchair Pronto M61 - page 26
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Pronto® M51™and M61™with SureStep® 26 Part No 1125085 About Joystick Diagnostics The joystick information gauge and the service indicator give indicat ions of the type of fault or error detected by the control modu ...
-
Invacare Wheelchair Pronto M61 - page 27
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Part No 1125085 27 Pronto® M51™and M61™with SureStep® Service Indicator Light Diagnostics Left RED LED is flashing. Battery charge is low. The batteries should be charged as soon as possi- ble. Left to Right “chase” alter- nating with steady display. Joystick is in program- ming, inhibit and/o ...
-
Invacare Wheelchair Pronto M61 - page 28
SEC T I O N 4— SA F E T Y I N SPE C T I O N /T R O U B L E SH O O T I N G Pronto® M51™and M61™with SureStep® 28 Part No 1125085 Additional Troubleshooting In formation for M61 Wheelchairs Checking Battery Charge Level The following “Do’ s” and “Don’ts” are provided for your convenience an ...
-
Invacare Wheelchair Pronto M61 - page 29
SECTION 5—WHEELCHAIR OPERATION Part No 1125085 29 Pronto® M51™and M61™with SureStep® SECTION 5—WHEELCHAIR OPERATION WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Set-up/programming of the El ectronic Control Unit ...
-
Invacare Wheelchair Pronto M61 - page 30
SECTION 5—WHEELCHAIR OPERATION Pronto® M51™and M61™with SureStep® 30 Part No 1125085 When first learning to driv e, select a slow speed and try to driv e the wheelchair as slowly as possible by pushing the joystick slightly forw ard. This ...
-
Invacare Wheelchair Pronto M61 - page 31
SECTION 5—WHEELCHAIR OPERATION Part No 1125085 31 Pronto® M51™and M61™with SureStep® FIGURE 5.3 Adjusting the Speed Using the Horn NOTE: For this proced ure, refe r to FIGURE 5.4. 1. Press the horn button located in the center of the speed indicator . The horn ? ...
-
Invacare Wheelchair Pronto M61 - page 32
SECTION 5—WHEELCHAIR OPERATION Pronto® M51™and M61™with SureStep® 32 Part No 1125085 NOTE: For this proced ure, refe r to FIGURE 5.5 on page 32. NOTE: This procedur e applies to M61 wheelchairs only . 1. Make sure the wheelchair is on a level surface ...
-
Invacare Wheelchair Pronto M61 - page 33
SECTION 5—WHEELCHAIR OPERATION Part No 1125085 33 Pronto® M51™and M61™with SureStep® SPJ+ and SPJ+ w/ACC Joysti ck Switches and Indicators NOTE: For the following information, ref e r to FIGURE 5.6. FIGURE 5.6 SPJ+ and SPJ+ w/ACC Joysti ck Switches and Indicators On/Off Button DETAIL “A” - FRONT VIEW Charger/ ...
-
Invacare Wheelchair Pronto M61 - page 34
SECTION 5—WHEELCHAIR OPERATION Pronto® M51™and M61™with SureStep® 34 Part No 1125085 On/Off Button This button is located at the front of the joystick housing . It is used to turn the wheelchair on and off, to remov e the joystick from sl ...
-
Invacare Wheelchair Pronto M61 - page 35
SECTION 5—WHEELCHAIR OPERATION Part No 1125085 35 Pronto® M51™and M61™with SureStep® Joystick The joystick has proportional drive control, meaning that further the joystick is pushed from the upright (neutral) position, the faster the wheelchair or s ...
-
Invacare Wheelchair Pronto M61 - page 36
SECTION 6—ARMS Pronto® M51™and M61™with SureStep® 36 Part No 1125085 SECTION 6—ARMS WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Before performing any maintenance, adju stment or service verify that On/Off switch ...
-
Invacare Wheelchair Pronto M61 - page 37
SECTION 6—ARMS Part No 1125085 37 Pronto® M51™and M61™with SureStep® Adjusting Angle NOTE: For this proced ure, refe r to FIGURE 6.3. WARNING Pinch point may occur when adjusting the arm angle position. 1. Lift up the armrest. 2. Loosen the jam nut. 3. Adjust the socket screw ? ...
-
Invacare Wheelchair Pronto M61 - page 38
SECTION 6—ARMS Pronto® M51™and M61™with SureStep® 38 Part No 1125085 Installing/Removing Flip Back Armrests WARNING Make sure the flip back ar mrest release and height adju stment leve rs are in the locked position before using the wheelchair. NOTE: For this proced ure, refe r to FIGURE 6.5 on page 38. NO ...
-
Invacare Wheelchair Pronto M61 - page 39
SECTION 6—ARMS Part No 1125085 39 Pronto® M51™and M61™with SureStep® Positioning/Adjusting Flip Back Armrests NOTE: For this proced ure, refe r to FIGURE 6.6 on page 39. Positioning Flip Back Armrests for User Transfer 1. Unlock the flip back armrest by pulling the armrest ...
-
Invacare Wheelchair Pronto M61 - page 40
SECTION 7—SEAT Pronto® M51™and M61™with SureStep® 40 Part No 1125085 SECTION 7—SEAT WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Before performing any maintenance, adju stment or service verify that On/Off switch ...
-
Invacare Wheelchair Pronto M61 - page 41
SECTION 7—SEAT Part No 1125085 41 Pronto® M51™and M61™with SureStep® FIGURE 7.2 Adjusting the Back Angle - Fold Down Back Angle Adjusting the Headrest (Semi-Recline Only) NOTE: For this proced ure, refe r to FIGURE 7.3. 1. T o raise the headrest, lift the headrest up to the des ...
-
Invacare Wheelchair Pronto M61 - page 42
SECTION 7—SEAT Pronto® M51™and M61™with SureStep® 42 Part No 1125085 Removing/Installing the Seat Assembly NOTE: For this proced ure, refe r to FIGURE 7.4. Removing 1. Disconnect the joystick. Refer to Disconnecting/Connecting the Joystick on page 74. 2. Fold down the s ...
-
Invacare Wheelchair Pronto M61 - page 43
SECTION 7—SEAT Part No 1125085 43 Pronto® M51™and M61™with SureStep® Replacing the Seat Positioning Strap WARNING ALWAYS wear your se at positioning strap. The seat positioning strap is a positioning be lt only. It is not d esigned for use as a safety device withstanding hi gh stress loads such as auto or aircraft safety belts. If signs ...
-
Invacare Wheelchair Pronto M61 - page 44
SECTION 7—SEAT Pronto® M51™and M61™with SureStep® 44 Part No 1125085 ASBA Seat NOTE: For this proced ure, refe r to FIGURE 7.6. NOTE: This procedur e is for Adjustable Seat Back Angle (ASBA) seats only . 1. Remove the seat cushion from the seat p ...
-
Invacare Wheelchair Pronto M61 - page 45
SECTION 8—FOOTBOARD ASSEMBLY Part No 1125085 45 Pronto® M51™and M61™with SureStep® SECTION 8—FOOTBOARD ASSEMBLY WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Before performing any maintenance, adju stment or servi ...
-
Invacare Wheelchair Pronto M61 - page 46
SECTION 8—FOOTBOARD ASSEMBLY Pronto® M51™and M61™with SureStep® 46 Part No 1125085 Installing WARNING Make sure the detent balls of the quick- release pin are full y released beyond the outer edge of the tube befo re operating the wh eelchair. Otherwise, injury and/or damage may result. Keep detent balls clean. 1. P osition the ...
-
Invacare Wheelchair Pronto M61 - page 47
SECTION 8—FOOTBOARD ASSEMBLY Part No 1125085 47 Pronto® M51™and M61™with SureStep® FIGURE 8.2 Adjusting the Footboard Assembly - Angle Depth NOTE: For this proced ure, refe r to FIGURE 8.3. 1. Remove the quick release pin that secures the footboard assembly to the wheel ...
-
Invacare Wheelchair Pronto M61 - page 48
SECTION 9—FRONT RIGGINGS Pronto® M51™and M61™with SureStep® 48 Part No 1125085 SECTION 9—FRONT RIGGINGS WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. DO NOT stand on the front riggings, otherwise damage may occur. ...
-
Invacare Wheelchair Pronto M61 - page 49
SECTION 9—FRONT RIGGINGS Part No 1125085 49 Pronto® M51™and M61™with SureStep® Removing 1. Push the front rigging release lever inw ard and rotate the footrest out. 2. Lift up on front rigging and remove from the wheelchair . 3. Repeat STEPS 1 ‐ 2 ...
-
Invacare Wheelchair Pronto M61 - page 50
SECTION 9—FRONT RIGGINGS Pronto® M51™and M61™with SureStep® 50 Part No 1125085 Model PH904A and PHAL4A NOTE: For this proced ure, refe r to FIGURE 9.3. NOTE: PH904A style fr ont rigging shown. PHA L4A fr ont rigging adjust the same way . 1. Loosen, but do no ...
-
Invacare Wheelchair Pronto M61 - page 51
SECTION 9—FRONT RIGGINGS Part No 1125085 51 Pronto® M51™and M61™with SureStep® Raising/Lowering Elevating Front Riggings NOTE: For this proced ure, refe r to FIGURE 9.5. 1. P erform one of the following: •R a i s i n g ‐ Pull back on the release lever and raise ? ...
-
Invacare Wheelchair Pronto M61 - page 52
SECTION 9—FRONT RIGGINGS Pronto® M51™and M61™with SureStep® 52 Part No 1125085 4. Using the tw o socket bolts and locknuts, secure the telescoping front rigging support to the seat frame as shown in FIGURE 9.6. 5. If necessary , repeat STEPS 2 ? ...
-
Invacare Wheelchair Pronto M61 - page 53
SECTION 9—FRONT RIGGINGS Part No 1125085 53 Pronto® M51™and M61™with SureStep® Standard Seat NOTE: For this proced ure, refe r to FIGURE 9.7 on page 54. NOTE: When adjusting th e telescoping fr ont rigging support depth, ensur e the footplate does not in ...
-
Invacare Wheelchair Pronto M61 - page 54
SECTION 9—FRONT RIGGINGS Pronto® M51™and M61™with SureStep® 54 Part No 1125085 FIGURE 9.7 Adjusting/Replacing Telescoping Fron t Rigging Supports - Standard Seat ASBA Seat NOTE: For this proced ure, refe r to FIGURE 9.8 on page 55. 1. Remove the two mounting screws, spacers and loc ...
-
Invacare Wheelchair Pronto M61 - page 55
SECTION 9—FRONT RIGGINGS Part No 1125085 55 Pronto® M51™and M61™with SureStep® NOTE: The two telescoping fr ont rigging supports ca n be positioned at differ ent depths depending on the need of the user . FIGURE 9.8 Adjusting/Replacing Telescoping Fr ont Rigging Sup ...
-
Invacare Wheelchair Pronto M61 - page 56
SECTION 10—TOP SHROUD AND WHEELS Pronto® M51™and M61™with SureStep® 56 Part No 1125085 SECTION 10—TOP SHROUD AND WHEELS WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Before performing any maintenance, adju stment ...
-
Invacare Wheelchair Pronto M61 - page 57
SECTION 10—TOP SHROUD AND WHEELS Part No 1125085 57 Pronto® M51™and M61™with SureStep® FIGURE 10.1 Removing/Installing the Top Shroud Engaging/Disengaging Motor Release Lever WARNING DO NOT engage or disengage the motor releas e lever until the On/Off switch on the joystick is in the Off position. CAUTION Ensure both motor re lease leve ...
-
Invacare Wheelchair Pronto M61 - page 58
SECTION 10—TOP SHROUD AND WHEELS Pronto® M51™and M61™with SureStep® 58 Part No 1125085 FIGURE 10.2 Engaging/Disengaging Motor Release Lever Replacing Front/Rear Caster Assemblies NOTE: For this proced ure, refe r to FIGURE 10.3. NOTE: Front and rear caster assemblies are rep la c ed in ...
-
Invacare Wheelchair Pronto M61 - page 59
SECTION 10—TOP SHROUD AND WHEELS Part No 1125085 59 Pronto® M51™and M61™with SureStep® Adjusting Forks NOTE: For this proced ure, refe r to FIGURE 10.4. 1. Remove the dust cov er . 2. T o pro perly tighten caster journal system and guard against flutter , perform ? ...
-
Invacare Wheelchair Pronto M61 - page 60
SECTION 11—BATTERIES Pronto® M51™and M61™with SureStep® 60 Part No 1125085 SECTION 11—BATTERIES Warnings For Handling and Replacing Batteries WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Make sure power to the wh ...
-
Invacare Wheelchair Pronto M61 - page 61
SECTION 11—BATTERIES Part No 1125085 61 Pronto® M51™and M61™with SureStep® Using the Proper Batteries NOTE: For this proced ure, refe r to FIGURE 1 1.1. 1. Place battery on ground/flat surface. 2. V isually draw a horizontal and vertical centerline through the middl ...
-
Invacare Wheelchair Pronto M61 - page 62
SECTION 11—BATTERIES Pronto® M51™and M61™with SureStep® 62 Part No 1125085 NOTE: For this proced ure, refe r to FIGURE 1 1.2 on page 63. NOTE: If ther e is battery acid in th e bottom of the battery tray or on the sides of the battery ...
-
Invacare Wheelchair Pronto M61 - page 63
SECTION 11—BATTERIES Part No 1125085 63 Pronto® M51™and M61™with SureStep® 8. Connect joystick cable (not sh own). Refer to Disconnecting/Connecting the Joystick on page 121. FIGURE 11.2 Removing/Installing Batterie s from/into Battery Tray Connecting/Disconnecting Battery Cables Connecting Batter ...
-
Invacare Wheelchair Pronto M61 - page 64
SECTION 11—BATTERIES Pronto® M51™and M61™with SureStep® 64 Part No 1125085 WARNING Battery terminal configuration as show n in Detail “A” of FIGURE 11.3 MUST be used. Batteries that have th e terminal configuration reve rsed MUST NOT be used - otherwise serious injury or damage may occur. Install prote ctive caps on POSITI VE (+) an ...
-
Invacare Wheelchair Pronto M61 - page 65
SECTION 11—BATTERIES Part No 1125085 65 Pronto® M51™and M61™with SureStep® FIGURE 11.3 Connecting/Disconnecting Battery Ca bles RED Connectors POSITIVE (+) Battery Cable POSITIVE (+) Battery terminal NEGATIVE (-) Battery Cable NEGATIVE (-) Battery Terminal Cap NEGATIVE (-) Battery terminal Locknuts U1 Battery POSITIVE (+) Battery Terminal C ...
-
Invacare Wheelchair Pronto M61 - page 66
SECTION 11—BATTERIES Pronto® M51™and M61™with SureStep® 66 Part No 1125085 Disconnecting Battery Cables WARNING The use of rubber gloves is recommended when working with batteries. NEVER allow any of your tools and/or b attery cables to co ntact both battery terminals at the same time . An electrical short may occur and serious personal ...
-
Invacare Wheelchair Pronto M61 - page 67
SECTION 11—BATTERIES Part No 1125085 67 Pronto® M51™and M61™with SureStep® CAUTION New batteries MUST be fully charged pr ior to initial use of the wheelchair. ALWAYS charge new batteries before initial use or ba ttery life will be reduced. As a general rule, you should recharge your batteries as frequently as possible to assure the longest ...
-
Invacare Wheelchair Pronto M61 - page 68
SECTION 11—BATTERIES Pronto® M51™and M61™with SureStep® 68 Part No 1125085 On-Board Battery Charger DANGER When using an extension cord , use only a three wire extension cord having at least 16 AWG (American Wire Gauge) wire and the same or high er electrical rating as the device being connected. Us e of improper extension cord could re ...
-
Invacare Wheelchair Pronto M61 - page 69
SECTION 11—BATTERIES Part No 1125085 69 Pronto® M51™and M61™with SureStep® FIGURE 11.4 On-Board Battery Charger Charging Using An Independent Ch arger Plugged Into The Joystick WARNING Read and carefully fol low the individual in structions for each charger (supplied or purchased). If charging instructions are no t supplied, consult a q ...
-
Invacare Wheelchair Pronto M61 - page 70
SECTION 11—BATTERIES Pronto® M51™and M61™with SureStep® 70 Part No 1125085 NOTE: For this proced ure, refe r to FIGURE 1 1.5. NOTE: The charger port located on the fr ont of the joystick requ i res the use of an independent charger . The inde ...
-
Invacare Wheelchair Pronto M61 - page 71
SECTION 12—ELECTRONICS Part No 1125085 71 Pronto® M51™and M61™with SureStep® SECTION 12—ELECTRONICS WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Before performing any maintenance, adju stment or service verify th ...
-
Invacare Wheelchair Pronto M61 - page 72
SECTION 12—ELECTRONICS Pronto® M51™and M61™with SureStep® 72 Part No 1125085 FIGURE 12.1 Removing/Installing the Joystick Repositioning the Joystick Van Seat NOTE: For this proced ure, refe r to FIGURE 12.2 on page 73. NOTE: Ta k e note of position and orientation of mounting ? ...
-
Invacare Wheelchair Pronto M61 - page 73
SECTION 12—ELECTRONICS Part No 1125085 73 Pronto® M51™and M61™with SureStep® 5. Using the three hex mounting screws, spacers and locknuts secure the mounting bracket to the three mounting holes of the arm frame. 6. If necessary , perform the ...
-
Invacare Wheelchair Pronto M61 - page 74
SECTION 12—ELECTRONICS Pronto® M51™and M61™with SureStep® 74 Part No 1125085 FIGURE 12.3 Repositioning the Joystick - ASBA Seat Disconnecting/Connecting the Joysti ck NOTE: For this proced ure, refe r to FIGURE 12.4 on page 75. Disconnecting 1. Hold the light GREY collar portion of ...
-
Invacare Wheelchair Pronto M61 - page 75
SECTION 12—ELECTRONICS Part No 1125085 75 Pronto® M51™and M61™with SureStep® FIGURE 12.4 Disconnecting/Connecting the Joystick Joystick Office Style Seat Joystick Cable Joystick Conn ector Controller Connector Light Grey Collar ...
-
Invacare Wheelchair Pronto M61 - page 76
SECTION 13—ACCESSORIES Pronto® M51™and M61™with SureStep® 76 Part No 1125085 SECTION 13—ACCESSORIES WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Before performing any maintenance, adju stment or service verify th ...
-
Invacare Wheelchair Pronto M61 - page 77
SECTION 13—ACCESSORIES Part No 1125085 77 Pronto® M51™and M61™with SureStep® Installing/Removing the Oxygen Holder WARNING Contact your oxygen supplier for instruct ions in the use of oxygen. Extreme care MUST be exercised when us ing oxygen in close proxim ity to electric circuits. The Invacare oxygen holder is designed to be used in c ...
-
Invacare Wheelchair Pronto M61 - page 78
SECTION 13—ACCESSORIES Pronto® M51™and M61™with SureStep® 78 Part No 1125085 Installing/Removing/Using the Walker Holder INSTALLATION WARNINGS After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely. The installation of the walker holder onto the back of the wheelchair seat ...
-
Invacare Wheelchair Pronto M61 - page 79
GLOBAL LIMITED WARRANTY (EXCLUDING CANADA) Part No 1125085 79 Pronto® M51™and M61™with SureStep® GLOBAL LIMITED WARRANTY (EXCLUDING CANADA) PLEASE NOTE: THE WARRANTY BELOW HAS B EEN DRAFTED TO COMPLY WI TH FEDERAL LAW APPLICABLE TO PRODUCTS MANU FACTURED AFTER JULY 4, 1975. This warranty is extende d only to the original purcha ser who purcha ...
-
Invacare Wheelchair Pronto M61 - page 80
CANADA LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS B EEN DRAFTED TO COMPLY WI TH FEDERAL LAW APPLICABLE TO PRODUCTS MANU FACTURED AFTER JULY 4, 1975. This warranty is exten ded only to the original purc haser who purchases th is product within Cana da when new and unused from Invacare or a dealer. This warranty i s not extended to any othe ...
Haben Sie eine Frage bezüglich Invacare Wheelchair Pronto M61?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Invacare Wheelchair Pronto M61 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Invacare Wheelchair Pronto M61 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.