Deutsch dropdown-ico

Bedienungsanleitung Olympus MAUSB-10

52 Seiten 3.48 mb
Download

Zur Seite of 52

Summary
  • Olympus MAUSB-10 - page 1

    USB Reader/Writer REFERENCE MANU AL ...

  • Olympus MAUSB-10 - page 2

    2 Introduction Thank you for purchasing our product. This product is exclusively for reading and writing data to an xD-Picture Card/SmartMedia. Y ou can transfer large amounts of data to and from the card quickly and easily using a computer equipped with a USB port (IBM PC/A T compatibles and Macintosh). Before using this product, read this manual ...

  • Olympus MAUSB-10 - page 3

    3 Contents Introduction .................................................................................................................................... 2 Contents ......................................................................................................................................... 3 What’ s inc luded ...................... ...

  • Olympus MAUSB-10 - page 4

    4 What’ s inc luded Make sure all the following items are included. If any items are missing, inform the shop from where you purchased this product right away . Names of parts USB connector (T ype A) Connect this to your computer ’s USB port. USB cable Quick start guides “Precautions” document MAUSB-10 Card cover The card(s) is recognized w ...

  • Olympus MAUSB-10 - page 5

    5 Before getting started System requirements Y our computer must conform to the following minimum standards in order to use it with the MAUSB-10. ● Compatible operating systems IBM PC/A T compatible: pre-installed Windows 98/98 SE/Me/2000 Professional (referred to as Windows 2000 in this manual)/XP Power Macintosh G3/G4, Power Book G3/G4, iMac/iB ...

  • Olympus MAUSB-10 - page 6

    6 W indows Macintosh [USB 1.1 compatible] T urn on computer . Place provided Installation CD-ROM in CD-ROM drive. *2 Install driver . *2 Restar t computer . *2 Connect to computer . Get started! *4 *1 : Windows 95/3.1/NT are not compatible. *2 : Y ou only need to perform this procedure before using the MAUSB-10 for the first time. *3 : Insert the C ...

  • Olympus MAUSB-10 - page 7

    7 How to install Also refer to your computer ’s user manual and the manuals for any optional devices you are using. 1 T ur n on the computer <98/98 SE/Me ⽧ Install> T urn on your computer’s power (and connected devices) to start Windows. 2 Install the device driver <98/98 SE/Me ⽧ Install> When using the MAUSB-10 for the first ti ...

  • Olympus MAUSB-10 - page 8

    8 <98/98 SE/Me ⽧ Install> 4. During installation, the window at right appears. * The installation time may vary , depending on your computer. 5. When the driver installation is complete, the window at right appears. Click the “Finish” button. The device driver is now installed. Once the driver has been installed, the MAUSB-10 will be re ...

  • Olympus MAUSB-10 - page 9

    9 1. Double-click “My Computer”. <98/98 SE/Me ⽧ Install> 2. Right-c lic k “OL YMPUS”. Select “Open” from the pop-up menu. 4. Double-click “SETUP”. * The “OL YMPUS USB Reader/Writer InstallShield Wizard” window appears. Start installing by following “Install the device driver” ( 墌 p. 7). 1. Disconnect the MAUSB-10 f ...

  • Olympus MAUSB-10 - page 10

    10 Operating the MAUSB-10 The operating procedures for the MAUSB-10 under Windows are described below . 1 Connecting to the computer <98/98 SE/Me ⽧ Operation> After installing the device driver , connect the MAUSB-10’ s connector to the USB port on your computer . (Y ou can plug in the USB connector while the computer is in use.) [Notes] ...

  • Olympus MAUSB-10 - page 11

    11 < 98/98 SE/Me ⽧ Operation > When the MAUSB-10 is connected to your computer , it is recognized as a “Removable Disk”. Y ou can see two “Removable Disk” icons by opening “My Computer” from the desktop. [Drive letters] The drive letters for the two “Removable Disk” icons appear in alphabetical order , with the xD-Picture Ca ...

  • Olympus MAUSB-10 - page 12

    12 2 Inserting a card <98/98 SE/Me ⽧ Operation> 1. Make sure the MAUSB-10 is connected to the computer and insert the card into the corresponding card slot. [xD-Picture Card] Make sure the card is level and that the gold-colored contact area is facing down . Insert the card all the way into the left-hand slot. [SmartMedia] Make sure the car ...

  • Olympus MAUSB-10 - page 13

    13 3 Removing a card <98/98 SE/Me ⽧ Operation> Close all software programs that are using data on the card (e.g. Explorer , graphics applications), then follow the steps below . Attention! If you do not follow the steps below , the data on the card(s) may be damaged. Note NEVER open the card cover , remove the card, or unplug the USB connec ...

  • Olympus MAUSB-10 - page 14

    14 4 Copying files from a card <98/98 SE/Me ⽧ Operation> 4. Drag the file icons you want to copy and drop them onto the destination folder . * The process is the same as copying files from a floppy disk. * It is also possible to move files to another folder, erase files, or write data from another folder . (Data cannot be written to or eras ...

  • Olympus MAUSB-10 - page 15

    15 5 Formatting a card <98/98 SE/Me ⽧ Operation> 6 Disconnecting the MAUSB-10 <98/98 SE/Me ⽧ Operation> Close all software programs that are using the card (e. g. Explorer , graphics applications), then follow the steps below . 1. Make sure that the status lamp is NOT on. * If the status lamp is on, right click the Removable Disk ic ...

  • Olympus MAUSB-10 - page 16

    16 How to uninstall the device driver <98/98 SE/Me> The device driver can be deleted if it is no longer needed. First make sure that the MAUSB-10 is disconnected from the computer’ s USB port, then follow the steps below . * On-screen displays or messages may vary depending on the version of Windows you are using. 1. Click the “Start” b ...

  • Olympus MAUSB-10 - page 17

    17 How to uninstall the device driver (Cont.) <98/98 SE/Me> 4. A confirmation window appears. Click “OK”. 5. The “InstallShield Wizard” window appears. 6. The window at right appears. Click the “Finish” button. 7. The window at right appears. Select “Y es, I want to restart my computer now .” if you are ready , then click “F ...

  • Olympus MAUSB-10 - page 18

    18 How to install Also refer to your computer ’s user manual and the manuals for any optional devices you are using. 1 T ur n on the computer <2000/XP ⽧ Install> T urn on your computer’s power (and connected devices) to start Windows 2000/XP . T o install the device driver , log on with the user name “ A dministrator”, or use a user ...

  • Olympus MAUSB-10 - page 19

    19 <2000/XP ⽧ Install> 4. During installation, the window at right appears. * The installation time may vary , depending on your computer. 5. When installation of the device driver is complete, the window at right appears. Click the “Finish” button. The device driver is now installed. (Remove the CD-ROM from the CD-ROM drive and store i ...

  • Olympus MAUSB-10 - page 20

    20 1. Double-click “My Computer”. <2000/XP ⽧ Install> 2. Right-c lic k “OL YMPUS”. Select “Open” from the pop-up menu. 4. Double-click “SETUP”. * The “OL YMPUS USB Reader/Writer InstallShield Wizard” window appears. Start installing by following “Install the device driver” ( 墌 p. 18). If the installation window doe ...

  • Olympus MAUSB-10 - page 21

    21 Operating the MAUSB-10 The operating procedures for the MAUSB-10 under Windows 2000/XP are described below . 1 Connecting to the computer <2000/XP ⽧ Operation> After installing the device driver , connect the MAUSB-10’ s connector to the USB port on your computer . (Y ou can plug in the USB connector while the computer is in use.) [Not ...

  • Olympus MAUSB-10 - page 22

    22 <2000/XP ⽧ Operation> [Installing the hardware] 1. The “Found New Hardware Wizard” window appears when the MAUSB-10 is connected to Windows XP for the first time. Make sure that “Install the software automatically [Recommended]” is selected and click the “Next” button. * On Windows 2000, the hardware will be installed automat ...

  • Olympus MAUSB-10 - page 23

    23 <2000/XP ⽧ Operation> 5. When the driver installation is complete, the window at right appears. Click the “Finish” button. 6. Confirm that two “Removable Disk” icons have been added by opening “My Computer” from the desktop. * The drive letters (e.g. “D:”, “E:”, etc.) used by your computer may differ depending on your ...

  • Olympus MAUSB-10 - page 24

    24 Before connecting After connecting MAUSB-10 * In this example, the Removable Disks are recognized as the J and K drive. The drive letters (e.g. “J:”, “K:”, etc.) used by your computer may dif fer depending on your computer and/or connected optional devices. < 2000/XP ⽧ Operation > When the MAUSB-10 is connected to your computer , ...

  • Olympus MAUSB-10 - page 25

    25 2 Inserting a card <2000/XP ⽧ Operation> 1. Make sure the MAUSB-10 is connected to the computer and insert the card into the corresponding card slot. [xD-Picture Card] Make sure the card is level and that the gold-colored contact area is facing down . Insert the card all the way into the left-hand slot. [SmartMedia] Make sure the card is ...

  • Olympus MAUSB-10 - page 26

    26 3 Removing a card <2000/XP ⽧ Operation> Close all software programs that are using data on the card (e.g. Explorer , graphics applications), then follow the steps below . Attention! If you do not follow the steps below , the data on the card(s) may be damaged. Note NEVER open the card cover , remove the card, or unplug the USB connector ...

  • Olympus MAUSB-10 - page 27

    27 4 Copying files from a card <2000/XP ⽧ Operation> 1. Start up your computer . 2. Double-click “My Computer” from the desktop. 3. T o view the contents of a card, double-clic k the corresponding “Removable Disk” icon. * For information about how to locate the files you want to copy, refer to the manual for the product used to reco ...

  • Olympus MAUSB-10 - page 28

    28 5 Formatting a card <2000/XP ⽧ Operation> [Before formatting the card] • T o format a card, log on with the user name “Administrator”, or use a user name with administrator privileges. Otherwise, formatting the card will be impossible. • If a card is going to be used with a digital camera, be sure to format it with the camera you ...

  • Olympus MAUSB-10 - page 29

    29 6 Disconnecting the MAUSB-10 <2000/XP ⽧ Operation> Close all software programs that are using data on the card (e.g. Explorer , graphics applications), then follow the steps below . 1. Make sure that the status lamp is NOT on. 2. Left-click the “Unplug or Eject Hardware” icon on the taskbar . 3. A message box titled “Safely remove ...

  • Olympus MAUSB-10 - page 30

    30 How to uninstall the device driver <2000/XP> The device driver can be deleted if it is no longer needed. First make sure that the MAUSB-10 is disconnected from the computer’ s USB port, then follow the steps below . * On-screen displays or messages may vary depending on the version of Windows you are using. 1. Click the “Start” butto ...

  • Olympus MAUSB-10 - page 31

    31 How to uninstall the device driver (Cont.) <2000/XP> 4. A confirmation window appears. Click “OK”. 5. The “InstallShield Wizard” window appears. The device driver is no longer installed. 6. The window at right appears. Click the “Finish” button. 7. The window at right appears. Select “Y es, I want to restart my computer now . ...

  • Olympus MAUSB-10 - page 32

    32 How to install Also refer to your computer ’s user manual and the manuals for any optional devices you are using. 1 T ur n on the computer <Mac OS 8.6~9.2 ⽧ Install> T urn on your computer’s power (and connected devices) to start Mac OS. [Notes] • Do NOT connect the MAUSB-10 to the computer until installation of the device driver ( ...

  • Olympus MAUSB-10 - page 33

    33 3 Install the device driver <Mac OS 8.6~9.2 ⽧ Install> When using the MAUSB-10 for the first time, you must first install the device driver included on the provided CD-ROM. 3. Doub le-click the “Mac OS 9” folder . 4. Doub le-click “USB Reader_Writer”. Before installation, make sure that: • Y our computer is turned on. • The p ...

  • Olympus MAUSB-10 - page 34

    34 < Mac OS 8.6~9.2 ⽧ Install > 6. Click the “Restart” button. The device driver is now installed. (Remove the CD-ROM from the CD-ROM drive and store it in a safe place.) 5. When the Mac OS 8.x, 9.x installer starts up, the window at right appears. Confirm “Install Location”, then click the “Install” button. ...

  • Olympus MAUSB-10 - page 35

    35 Operating the MAUSB-10 The operating procedure for the MAUSB-10 under Mac OS is described below . 1 Connecting to the computer <Mac OS 8.6~9.2 ⽧ Operation> After installing the device driver , connect the MAUSB-10’ s connector to the USB port on your computer . (Y ou can plug in the USB connector while the computer is in use.) [Notes] ...

  • Olympus MAUSB-10 - page 36

    36 2 Inserting a card <Mac OS 8.6~9.2 ⽧ Operation> 1. Make sure the MAUSB-10 is connected to the computer and insert the card into the corresponding card slot. [xD-Picture Card] Make sure the card is level and that the gold-colored contact area is facing down . Insert the card all the way into the left-hand slot. [SmartMedia] Make sure the ...

  • Olympus MAUSB-10 - page 37

    37 3 Removing a card <Mac OS 8.6~9.2 ⽧ Operation> Close all software programs that are using data on the card (e. g. graphics applications), then follow the steps below . Attention! If you do not follow the steps below , the data on the card(s) may be damaged. 2. Make sure that the status lamp is of f, then open the card cover and pull the ...

  • Olympus MAUSB-10 - page 38

    38 4 Copying files from a card <Mac OS 8.6~9.2 ⽧ Operation> 1. Insert a card in the MAUSB-10. * The status lamp blinks, then the card icon appears on the desktop. * The icon’s appearance may vary , depending on the card and the OS version. 2. Double-click the icon to display the files that you want to copy . * For information about how to ...

  • Olympus MAUSB-10 - page 39

    39 How to uninstall the device driver <Mac OS 8.6~9.2> The device driver can be deleted if it is no longer needed. First make sure that the MAUSB-10 is disconnected from the computer’s USB port, then follow the steps below . 1. From the desktop, double-click the hard disk icon. Drag & Drop 5. Restart the computer to confirm uninstallati ...

  • Olympus MAUSB-10 - page 40

    40 How to install Also refer to your computer ’s user manual and the manuals for any optional devices you are using. 1 T ur n on the computer <Mac OS X ⽧ Install> T urn on your computer’s power (and connected devices) to start Mac OS. [Notes] • Do NOT connect the MAUSB-10 to the computer until installation of the device driver ( 墌 p ...

  • Olympus MAUSB-10 - page 41

    41 3 Install the device driver <Mac OS X ⽧ Install> When using the MAUSB-10 for the first time, you must first install the device driver included on the provided CD-ROM. 1. Doub le-click the “OL YMPUS” icon. 2. Doub le-click the “MAUSB-10” folder . 5. The window at right appears. Click the lock icon next to “Click the lock to make ...

  • Olympus MAUSB-10 - page 42

    42 < Mac OS X ⽧ Install > 6. Enter the administrator ’ s name and the pass- word, then click the “OK” button. 7. Click the “Continue” button. 8. Click the “Continue” button. 9. Select the disk to install on, then click the “Continue” button. ...

  • Olympus MAUSB-10 - page 43

    43 < Mac OS X ⽧ Install > 10. Click the “Install” (or “Upgrade”) button. 11. Click the “Continue Installation” button. 12. The window at right appears during the installation. 13. Click the “Restart” button. The device driver is now installed. (Remove the CD-ROM from the CD-ROM drive and store it in a safe place.) ...

  • Olympus MAUSB-10 - page 44

    44 Operating the MAUSB-10 The operating procedure for the MAUSB-10 under Mac OS is described below . 1 Connecting to the computer <Mac OS X ⽧ Operation> After installing the device driver , connect the MAUSB-10’ s connector to the USB port on your computer . (Y ou can plug in the USB connector while the computer is in use.) [Notes] • Be ...

  • Olympus MAUSB-10 - page 45

    45 2 Inserting a card <Mac OS X ⽧ Operation> 1. Make sure the MAUSB-10 is connected to the computer and insert the card into the corresponding card slot. [xD-Picture Card] Make sure the card is level and that the gold-colored contact area is facing down . Insert the card all the way into the left-hand slot. [SmartMedia] Make sure the card i ...

  • Olympus MAUSB-10 - page 46

    46 3 Removing a card <Mac OS X ⽧ Operation> Close all software programs that are using data on the card (e. g. graphics applications), then follow the steps below . Attention! If you do not follow the steps below , the data on the card(s) may be damaged. 2. Make sure that the status lamp is of f, then open the card cover and pull the card(s ...

  • Olympus MAUSB-10 - page 47

    47 4 Copying files from a card <Mac OS X ⽧ Operation> 1. Insert a card in the MAUSB-10. * The status lamp blinks, then the card icon appears on the desktop. * The icon’ s appearance may vary , depending on the card and the OS version. 2. Double-click the icon to display the files that you want to copy . * For information about how to loca ...

  • Olympus MAUSB-10 - page 48

    48 T roubleshooting Windows The status lamp (green) does not light. A “Found New Hardware Wizard” windo w appears when you connect the MAUSB-10. The MAUSB-10 doesn’t work even after installing the driver and connecting the MAUSB-10 to the computer . “?” appear s in Device Mana g er . (This is after you have performed all the steps in the ...

  • Olympus MAUSB-10 - page 49

    49 T roubleshooting Macintosh The status lamp (green) does not light. No card icon(s) appears on the computer’ s screen. Y ou can read a card, but not write to it. Y ou cannot write with a SmartMedia. The error message “File Sharing is invalid.” appears. The card(s) is not inserted correctly . The card cover is not closed properly . The power ...

  • Olympus MAUSB-10 - page 50

    50 Specifications * The specifications in this manual are subject to change without prior notice. * For the latest information, visit the OL YMPUS web site (http://www .olympus.com). * 1 Some cards with ID are not generally available for purchase. Consult your nearest SmartMedia dealer for details. (OL YMPUS SmartMedia with ID: 16-128MB) * 2 A CD-R ...

  • Olympus MAUSB-10 - page 51

    51 Glossary of T er ms A program used to operate or manage a peripheral device (printer , modem, digital camera, USB reader/writer , etc.). Without the proper driver installed, a peripheral device will not be recognized by the computer . A window that appears on the monitor when the computer requires user confirmation or instructions on what to do. ...

  • Olympus MAUSB-10 - page 52

    OL YMPUS OPTICAL CO ., L TD. VT398703 ...

Produzent Olympus Kategorie Computer Drive

Dokumente, die wir vom Produzenten des Geräts Olympus MAUSB-10 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Olympus
- Bedienungsanleitungen MAUSB-10
- Produktkarten Olympus
- Informationsbroschüren
- oder Energieetiketten Olympus MAUSB-10
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Olympus MAUSB-10.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Olympus MAUSB-10, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Olympus MAUSB-10. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Olympus MAUSB-10 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Olympus MAUSB-10, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Olympus MAUSB-10 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Olympus MAUSB-10 verständlich ist.

Eine gänzliche Bedienungsanleitung von Olympus sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Olympus MAUSB-10 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Olympus MAUSB-10 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Olympus MAUSB-10, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Olympus MAUSB-10 - die uns die ersten Schritte während der Nutzung von Olympus MAUSB-10 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Olympus MAUSB-10 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Olympus MAUSB-10 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Olympus MAUSB-10?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Olympus MAUSB-10 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Olympus MAUSB-10 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)