Bedienungsanleitung Paxar 9433

10 Seiten 2.79 mb
Download

Zur Seite of 10

Summary
  • Paxar 9433 - page 1

    TC9433VMOI Rev AB 8/08 ©2006 Pa xar Americas, Inc. a subsidiary of Avery Dennison Corporation. All Rights Reserved. MONARCH  9433™ VEHICLE MOUNT INSTRUCTIONS Using the Vehicle Mount, you can attach your Monarch  9433  printer to a forklift or other vehicle. This document describes how to install and use the vehicle mount with the printe ...

  • Paxar 9433 - page 2

    2 DB9 Connector USB Port USB Cable Connecting the Communications Cables The printer uses either 9-pin serial communications or USB communications. For best results, use only Monarch® cables. Open the hinged cable door by loosening the two Phillips screws and lifting up on the door. Serial Cable 1. Plug the DB9 connector into the DB9 port. 2. Place ...

  • Paxar 9433 - page 3

    . 3 Installing on a Tabletop 1. Select a suitable location for the mount on your vehicle. 2. Align the four outside holes on the vehicle mount with the corresponding holes in your vehicle. 3. Place the four dampening washers between the vehicle and the bottom of the vehicle mount. The washers should be aligned with the nuts on the vehicle mount and ...

  • Paxar 9433 - page 4

    4 Installing Overhead (Upside Down) 1. Select a suitable location for the mount on your vehicle. 2. Center the clamping plate on two of your vehicle’s overhead rails. 3. Align the four inside nuts in the vehicle mount with the holes in the clamping plate. 4. Use the four ¼-20x2¼ screws and flat washers to attach the vehicle mount to your vehicl ...

  • Paxar 9433 - page 5

    . 5 Installing Vertically No screws or mounting hardware are provided for vertical installation. 1. Select a suitable location for the mount on your vehicle. 2. Align the nuts in the vehicle mount with the corresponding holes in your vehicle. 3. Use appropriate screws to attach the vehi cle mount to your vehicle, or to the appropriate hardware for ...

  • Paxar 9433 - page 6

    6 Attaching the Printer To attach the printer on the vehicle mount: 1. Make sure the printer’s battery and communication cable are installed. 2. Insert the printer into the brackets of the vehicle mount using the knobs as a guide. 3. Push down firmly on the brackets so the printer locks completely in place. Brackets Knob ...

  • Paxar 9433 - page 7

    . 7 Securing the Cables Use the cable guides located on the inside and front of the vehicle mount to secure any cables. 1. Attach the printer to the vehicle mount. 2. Thread the cable through the first opening and out the second opening of the cable guide on the inside of the mount, then through the cable guide in the front of the mount. 3. Connect ...

  • Paxar 9433 - page 8

    8 Loading Supplies To load supplies into the printer: 1. Turn off the printer. 2. Attach the printer to the vehicle mount. 3. Squeeze the supply bracket and the spring-loaded supply holder. Pull the hook end of the supply holder and turn it to the left to release the supply bracket. Pull the bracket up. Note: The supply holder cannot be removed. 4. ...

  • Paxar 9433 - page 9

    . 9 6. Pull the release levers located on both sides of the printer to open the supply door. 7. Insert an empty 3-inch core in between the supply holder tabs to open them to their widest position. 8. Slide the supply guides, located inside the printer on each side of the external supply slot, out to their widest position. 9. Feed the supply under t ...

  • Paxar 9433 - page 10

    10 10. Center-adjust the supply guides so that they barely touch the edge of the supply. 11. Pull out enough supply to lay across the exit chute. 12. Close the supply door until the release levers click into place. 13. Turn on the printer. 14. Press F to advance the supply. Refer to your Operator’s Handbook for information on printing with your M ...

Produzent Paxar Kategorie Printer

Dokumente, die wir vom Produzenten des Geräts Paxar 9433 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Paxar
- Bedienungsanleitungen 9433
- Produktkarten Paxar
- Informationsbroschüren
- oder Energieetiketten Paxar 9433
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Paxar 9433.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Paxar 9433, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Paxar 9433. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Paxar 9433 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Paxar 9433, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Paxar 9433 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Paxar 9433 verständlich ist.

Eine gänzliche Bedienungsanleitung von Paxar sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Paxar 9433 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Paxar 9433 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Paxar 9433, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Paxar 9433 - die uns die ersten Schritte während der Nutzung von Paxar 9433 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Paxar 9433 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Paxar 9433 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Paxar 9433?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Paxar 9433 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Paxar 9433 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)