Bedienungsanleitung Dolmar HT-2556 D, HT-2576 E

20 Seiten 3.36 mb
Download

Zur Seite of 20

Summary
  • Dolmar HT-2556 D, HT-2576 E - page 1

    Instruction Manual Important: Read this instruction manual carefully before putting the hedge trimmer into operation and strictly observe the safety regulations! Keep this instruction manual! HT -2556 D http://www .dolmar .com HT -2576 E ...

  • Dolmar HT-2556 D, HT-2576 E - page 2

    2 T able of contents Page Conformity Declaration ...................................................... 2 Packaging ............................................................................ 2 Delivery inventory .............................................................. 3 Symbols ............................................................... ...

  • Dolmar HT-2556 D, HT-2576 E - page 3

    3 4 Delivery inventory 1. Hedge trimmer HT -2576 E (depending on order) 2. Hedge trimmer HT -2556 D (depending on order) 3. Knife guard 4. Universal wrench 5. Instruction Manual (not shown) In case one of the parts listed should not be included in the delivery inventory , please consult your sales agent. Symbols Y ou will notice the following symbo ...

  • Dolmar HT-2556 D, HT-2576 E - page 4

    4 5 1 4 3 2 SAFETY PRECAUTIONS General precautions - In order to ensure safe operation, the operator must read this instruction manual to familiarize him or herself with the operation of the hedge trimmer . Users insufciently informed will endanger themselves as well as others due to improper handling. - Lend the hedge tr ...

  • Dolmar HT-2556 D, HT-2576 E - page 5

    5 6 7 10 9 8 - Fuels can contain substances similar to solvents. Eyes and skin should not come in contact with mineral oil products. Always wear protective gloves when refuelling. Frequently clean and change protective clothes. Do not breathe in fuel vapors. Inhalation of fuel vapours can be hazardous to your health. - Do not spill fuel or oil. Whe ...

  • Dolmar HT-2556 D, HT-2576 E - page 6

    6 - After use, clean the trimmer , in particular the cutter . Oil the cutter lightly and put on the blade guard. - Emtpy the fual tank completely before long-term storage or shipping the trimmer . Maintenance - Always switch off the trimmer and pull off the spark plug cap before doing any maintenance! - Pay special attention to the proper condi - t ...

  • Dolmar HT-2556 D, HT-2576 E - page 7

    7 1 Rear grip 2 Safety cutoff 3 Throttle lever 4 ON/OFF (I/O) switch 5 Starter grip 6 Fuel tank cap Stroke volume cm 3 24,5 24,5 Max. power at speed kW / rpm 0,88 / 7.000 0,88 / 7.000 Idling speed / Max. engine speed with cutter rpm 2.600 / 9.800 2.600 / 9.800 Clutch engagement speed rpm 3.600 3.600 Sound pressure level at the workplace L pA av per ...

  • Dolmar HT-2556 D, HT-2576 E - page 8

    8 + A Gasoline It is not wise to add more engine oil than specied to ensure safe operation. This will only result in a higher production of combus-tion residues which will pollute the environment and clog the exhaust channel in the cylinder as well as the mufer . In addition, fuel consumption will rise and perform- ance will decrease. The Sto ...

  • Dolmar HT-2556 D, HT-2576 E - page 9

    9 B C Refuelling FOLLOW THE SAFETY PRECAUTIONS! Be careful and cautious when handling fuels. Refuel only with the engine switched off and cooled down! Thoroughly clean the area around the caps, to prevent dirt from getting into the fuel tank. Unscrew the tank cap and ll the tank with fuel mixture until itre ...

  • Dolmar HT-2556 D, HT-2576 E - page 10

    10 D E 7 Cold start: Move the ON/OFF ( I / O ) switch ( 2 ) to position “I” . T urn the starting lever ( 6 ) to the ST ART position. Press the fuel pump ( 5 ) several (7-10) times to supply fuel to the carburetor . Assume the starting position (see above under Starting posi- tion ). Pull the starter cable by the grip ( 3 ) out slowly until you ...

  • Dolmar HT-2556 D, HT-2576 E - page 11

    1 1 1 2 3 4 Tips on trimming hedges The procedure described here can be used very often and makes working easier . If a hedge has to be cut back very substantially , it should be trimmed in two passes. The trapezoidal form shown prevents the lower portion of the hedge from thinning out due to lack of light. - First cut the hedge to the desired heig ...

  • Dolmar HT-2556 D, HT-2576 E - page 12

    12 A B STOP C STOP Cleaning and care Caution: Be especially careful when cleaning and caring for the cutter (injury hazard!). Never touch the cutter with bare hands. Always wear protective gloves! Regularly check the cutter for damage and clean it with a sui- table brush or cloth. If after extended use cutting performance is no longer satis- factor ...

  • Dolmar HT-2556 D, HT-2576 E - page 13

    13 D E F STOP Checking the mufer bolts / cleaning the exhaust outlet Caution: Do not tighten the mufer bolts when the engine is hot! The mufer bolts ( 6 ) are directly accessible so they can be checked for tightness. If loose, hand-tighten (caution: do not over-tighten). Regularly clean the exhaust outlet ( 7 ) with a suitable too ...

  • Dolmar HT-2556 D, HT-2576 E - page 14

    14 G Replacing the suction head The felt lter ( 8 ) of the suction head can become clogged. It is recommended to replace the suction head once every three months in order to ensure unimpeded fuel ow to the carburetor . T o remove the suction head for replacement, pull it out through the tank  ...

  • Dolmar HT-2556 D, HT-2576 E - page 15

    15 Service, spare parts and guarantee Workshop service The maintenanceand repair of modernhedge trimmers aswell as all safetydevices require qualiedtechnical training and aspecial workshop equipped with special tools and testing devices. All work not described in this Instruction Man ...

  • Dolmar HT-2556 D, HT-2576 E - page 16

    16 Pos. DOLMAR-No. Qty . Denomination 1 377 601 400 1 T ank cap, cpl. 2 382 650 390 1 Suction head 3  374300401 1 Airlterinsert 4 381 014 981 1 Spark plug - 944 340 001 1 Screwdriver - 944 350 000 1 Grease gun Extract from the spare parts list Use only original DOLMAR parts. For repairs and replacement of other parts, see yo ...

  • Dolmar HT-2556 D, HT-2576 E - page 17

    17 Notes ...

  • Dolmar HT-2556 D, HT-2576 E - page 18

    18 Notes ...

  • Dolmar HT-2556 D, HT-2576 E - page 19

    19 Notes ...

  • Dolmar HT-2556 D, HT-2576 E - page 20

    Form: 995 701 252 (3.06 GB) Specicationssubjecttochangewithoutnotice DOLMAR GmbH Postfach 70 04 20 D-22004 Hamburg Germany http://www .dolmar .com ...

Produzent Dolmar Kategorie Brush Cutter

Dokumente, die wir vom Produzenten des Geräts Dolmar HT-2556 D, HT-2576 E erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Dolmar
- Bedienungsanleitungen HT-2556 D, HT-2576 E
- Produktkarten Dolmar
- Informationsbroschüren
- oder Energieetiketten Dolmar HT-2556 D, HT-2576 E
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Dolmar HT-2556 D, HT-2576 E.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Dolmar HT-2556 D, HT-2576 E, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Dolmar HT-2556 D, HT-2576 E. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Dolmar HT-2556 D, HT-2576 E ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Dolmar HT-2556 D, HT-2576 E, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Dolmar HT-2556 D, HT-2576 E hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Dolmar HT-2556 D, HT-2576 E verständlich ist.

Eine gänzliche Bedienungsanleitung von Dolmar sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Dolmar HT-2556 D, HT-2576 E bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Dolmar HT-2556 D, HT-2576 E befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Dolmar HT-2556 D, HT-2576 E, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Dolmar HT-2556 D, HT-2576 E - die uns die ersten Schritte während der Nutzung von Dolmar HT-2556 D, HT-2576 E erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Dolmar HT-2556 D, HT-2576 E hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Dolmar HT-2556 D, HT-2576 E im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Dolmar HT-2556 D, HT-2576 E?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Dolmar HT-2556 D, HT-2576 E nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Dolmar HT-2556 D, HT-2576 E hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)