Bedienungsanleitung Extron electronic 6400 Series

72 Seiten 2.85 mb
Download

Zur Seite of 72

Summary
  • Extron electronic 6400 Series - page 1

    Matrix 3200 and 6400 Series V ideo Switcher 68-355-04 Rev. E Printed in the USA 11 02 MATRIX 6400 WIDEBAND VIDEO POWER SUPPLIES COMMUNICATIONS PRIMARY TX RS232 BME REMOTE SYSTEM STATUS REDUNDANT RX DIAGNOSTICS + V - V MATRIX 6400 WIDEBAND VIDEO POWER SUPPLIES COMMUNICATIONS PRIMARY TX RS232 BME REMOTE SYSTEM STATUS REDUNDANT RX DIAGNOSTICS + V - V ...

  • Extron electronic 6400 Series - page 2

    This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock. Caution Read Instructions ? ...

  • Extron electronic 6400 Series - page 3

    Chapter 1 - Introduction to the Matrix 3200/6400 Video Switcher What is a Matrix 3200/6400 Video Switcher? ..................................................................................... . 1-1 Features ...................................................................................................................................... 1 - 1 F ...

  • Extron electronic 6400 Series - page 4

    Glossary of T er ms .............................................................................................................. ............... A - 6 Matr ix 3200 & 6400 Video Switcher Vir tualization W or k-sheets ....................................................... A-11 Safety Instru ctions .............................................. ...

  • Extron electronic 6400 Series - page 5

    1 Chapter One Intr oduction to the Matrix 3200/6400 Video Switcher What is a Matrix 3200/6400 Video Switcher? F eatures Specifications Matr ix 3200/6400 Video Switcher ...

  • Extron electronic 6400 Series - page 6

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 1 • Introduction to the Matrix 3200/6400 Video Switcher What is a Matrix 3200/6400 Video Switcher? The Matrix 3200/6400 Video Switchers may be used with composite video, S-Video and component video. The Switchers are housed in 5U high rack- mountable metal enclosures with internal uni ...

  • Extron electronic 6400 Series - page 7

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 1 • Introduction to the Matrix 3200/6400 Video Switcher 1-2 Feature Descriptions Virtual Control – Logical assignment of physical Input/Output connector. Microprocessor Control – A Microprocessor enables the Matrix 3200/6400 Video switcher to be programmed from a host system, or f ...

  • Extron electronic 6400 Series - page 8

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 1 • Introduction to the Matrix 3200/6400 Video Switcher 1-3 Matrix 6400 Video Switcher (Front View) - shown with optional Front Panel Controller (FPC 1000) MA TRIX 6400 VIDEO POWER SUPPLIES COMMUNICATIONS PRIMARY TX RS232 BME REMOTE SYSTEM STA TUS REDUNDANT RX DIAGNOSTICS + V - V FPC- ...

  • Extron electronic 6400 Series - page 9

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 1 • Introduction to the Matrix 3200/6400 Video Switcher 1-4 Matrix 3200/6400 System Manuals This manual (68-355-03) covers the Matrix 6400 Audio Switcher. Following is a list of related manuals: • 68-355-01 = MKP 1000 User’s Manual • 68-355-02 = FPC 1000 User’s Manual • 68-4 ...

  • Extron electronic 6400 Series - page 10

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 1 • Introduction to the Matrix 3200/6400 Video Switcher 1-5 Matrix 3200 & 6400 Video Switcher System Over vie w A Matrix 3200/6400 Video Switcher System may consist of 1 to 3 Matrix 3200 and/or Matrix 6400 Video BMEs (Basic Module Enclosures). Three video formats are supported, co ...

  • Extron electronic 6400 Series - page 11

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 1 • Introduction to the Matrix 3200/6400 Video Switcher 1-6 Matrix 3200 Video and Matrix 6400 Audio Switcher System A Matrix 6400 Video Switcher System may include a Matrix 6400 Audio Switcher which would enable the system to switch both video and audio. Figure 1-6.A below is an examp ...

  • Extron electronic 6400 Series - page 12

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 1 • Introduction to the Matrix 3200/6400 Video Switcher 1-7 Matrix 3200/6400 Video Switcher Specifications Video input Number/signal type ............... Up to 32 or 64 (varies with configuration) RGsB, RsGsBs, component video, S-video, composite video, HDTV Connectors ............... ...

  • Extron electronic 6400 Series - page 13

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 1 • Introduction to the Matrix 3200/6400 Video Switcher 5U dimensions ...................... 8.75" H x 19.0" W* x 14.0" D 22.2 cm H x 48.3 cm W* x 35.6 cm D *17.0” (43.18 cm) W excluding rack ears 7U dimensions ...................... 12.25” H x 19.0” W* x 14.0” ...

  • Extron electronic 6400 Series - page 14

    Notes ...

  • Extron electronic 6400 Series - page 15

    2 Chapter T w o Installing the Matrix 3200/6400 Video Switcher Installing the Matr ix 3200/6400 Video BME Installing the Software BME Cabling Matr ix 3200/6400 Video Switcher ...

  • Extron electronic 6400 Series - page 16

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 2 • Installing the Matrix 3200/6400 Video Switcher Matrix 3200/6400 Video Switcher Installation Extron recommends that the following steps be done in the order listed to install a Matrix 3200/6400 Video BME. 1. Installing the Matrix 3200/6400 Video BME. (Page 2-1) 2. Set the BME addre ...

  • Extron electronic 6400 Series - page 17

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 2 • Installing the Matrix 3200/6400 Video Switcher 2-2 2. Setting BME Addresses Each BME must be set to a unique address of 0 - 5 using a push-button switch located on the rear panel (see Figure 2-2.B, Item 1). BME #0 will be the Main Controller and may be any module except the Sync m ...

  • Extron electronic 6400 Series - page 18

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 2 • Installing the Matrix 3200/6400 Video Switcher A N A H E I M , C A M A D E I N U S A A C P O W E R IN PU T F U S E : 2 5 0 V 5 .0 A T T 100-240V 0.5A MAX 50/60Hz DISCONNECT POWER CORD BEFORE SERVICING B M E A D D R E S S 4 4 BME ADDRESS IN O U T BME COMM. MKP COMM. A B C D E A B C ...

  • Extron electronic 6400 Series - page 19

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 2 • Installing the Matrix 3200/6400 Video Switcher 8. Installing the Matrix 6400/3200 Virtualization/ Control Program Software The Matrix 6400/3200 V irtualization/Control Program (Extron part number 29-036-01) , which is used by the Matrix 6400, is compatible with W indows 95/98/2000 ...

  • Extron electronic 6400 Series - page 20

    Notes ...

  • Extron electronic 6400 Series - page 21

    3 Chapter Three Using the Matrix 3200/6400 System Vir tualization/Contr ol Software Matr ix 3200/6400 Video Switchers ...

  • Extron electronic 6400 Series - page 22

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 3 • Tutorial - Using the Matrix 3200/6400 System Virtualization/Control Software Extron’s Matrix 3200/6400 System Virtualization/Control Program The Matrix 3200/6400 System Virtualization/Control program communicates with the Extron Matrix 3200/6400 System through the RS-232/422 por ...

  • Extron electronic 6400 Series - page 23

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 3 • Tutorial - Using the Matrix 3200/6400 System Virtualization/Control Software Switching does; it groups physical input connectors and physical output connectors together into Virtual Inputs and Virtual Outputs , each of which switches from 1 to 6 Virtual Planes. Let’s carry the S ...

  • Extron electronic 6400 Series - page 24

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 3 • Tutorial - Using the Matrix 3200/6400 System Virtualization/Control Software • The program will communicate with the Matrix 3200/6400 System to determine its hardware configuration (type and size of each connected BME). It then reads the system’s settings (Ties, Presets, Virtu ...

  • Extron electronic 6400 Series - page 25

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 3 • Tutorial - Using the Matrix 3200/6400 System Virtualization/Control Software ↑ F IGURE 3-4.A ↓ F IGURE 3-4.B 3-4 ...

  • Extron electronic 6400 Series - page 26

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 3 • Tutorial - Using the Matrix 3200/6400 System Virtualization/Control Software ↑ F IGURE 3-5.A Main Screen - Ties ↓ F IGURE 3-5.B Main Screen - Presets 3-5 ...

  • Extron electronic 6400 Series - page 27

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 3 • Tutorial - Using the Matrix 3200/6400 System Virtualization/Control Software • If you wish to group certain virtual outputs together so that you may later create Room Presets, now would be a good time to Create ROOMS by clicking C ONFIGURE |R OOM C ONFIGURATION . • You can cre ...

  • Extron electronic 6400 Series - page 28

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 3 • Tutorial - Using the Matrix 3200/6400 System Virtualization/Control Software • From the menu on the Main screen, click S YSTEM -C ONFIG to show the Virtual Switch Virtual Map screen (Figure 3-4.A). From the Virtual Map screen menu, click C ONFIGURE |R OOM C ONFIGURE to show the ...

  • Extron electronic 6400 Series - page 29

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 3 • Tutorial - Using the Matrix 3200/6400 System Virtualization/Control Software right side of the screen will cause that configuration to be read from the Matrix and drawn on the screen. The displayed preset becomes the “Current configuration” by clicking the G O B UTTON . • Yo ...

  • Extron electronic 6400 Series - page 30

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 3 • Tutorial - Using the Matrix 3200/6400 System Virtualization/Control Software • A typical Emulation operation might consist of multiple editing sessions: • Session A (connected to a Matrix 3200/6400 System) • Session B (Emulation) use MTRX6400.INI as the first file (source) t ...

  • Extron electronic 6400 Series - page 31

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 3 • Tutorial - Using the Matrix 3200/6400 System Virtualization/Control Software How to SAVE and RESTORE the Matrix 3200/6400 Settings The FILE menu provides the following functions: • Save MATRIX settings as... (uploads *.MTX file from system) • Restore MATRIX settings from... (d ...

  • Extron electronic 6400 Series - page 32

    Notes ...

  • Extron electronic 6400 Series - page 33

    4 Chapter Four RS-232/RS-422 Pr ogrammer’ s Guide Ser ial Communications P o r t Host to Switcher Series Instructions Commands and Responses Error Codes Switcher Initiated Messages Matr ix 3200/6400 Video Switchers ...

  • Extron electronic 6400 Series - page 34

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 4 • Programmer’s Guide Serial Communications P ort If the Matrix Video Switcher is the Master BME (BME #0), its RS-232/RS-422 connector may be connected to the serial port output of a Host device such as a computer or control panel. Software control of the switcher is made possible ...

  • Extron electronic 6400 Series - page 35

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 4 • Programmer’s Guide Host to Switcher Communications The Matrix Video Switcher accepts both Simple Instruction Set and Advanced Instruction Set Commands through the RS-232/RS-422 port. Simple Instruction Set (SIS) commands may consist of one or more characters per command field an ...

  • Extron electronic 6400 Series - page 36

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 4 • Programmer’s Guide S IMPLE I NSTRUCTION S ET C OMMANDS (P AGE 1 OF 3) O UTPUT S WITCHING C OMMANDS ASCII (H OST -S WITCHER ) RESPONSE (S WITCHER -H OST ) All * ! Out •In •All Example 3*21! Out21•In Ø 3 Example explanation: Connect Virtual Output 21 to Virtual Input 3 in a ...

  • Extron electronic 6400 Series - page 37

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 4 • Programmer’s Guide S IMPLE I NSTRUCTION S ET C OMMANDS (P AGE 2 OF 3) S ETTING A UDIO G AIN C OMMANDS ASCII (H OST -S WITCHER ) RESPONSE (S WITCHER -H OST ) Positive * GI n •Aud Example 4*3G I n Ø 4•Aud+ Ø 3 Example explanation: Set Audio Gain on Virtual Input 4 to 3 dB. A ...

  • Extron electronic 6400 Series - page 38

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 4 • Programmer’s Guide S IMPLE I NSTRUCTION S ET C OMMANDS (P AGE 3 OF 3) L IST C OMMANDS ASCII (H OST -S WITCHER ) RESPONSE (S WITCHER -H OST ) List Remote Keypad L K ADDR# MODE ID# NAME USER INPUT Example response for LK command ADDR# MODE ID # NAME USER INPUT 1 GLBL , ØØ ,, Ø ...

  • Extron electronic 6400 Series - page 39

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 4 • Programmer’s Guide A DVANCED I NSTRUCTION S ET AND S IMPLE I NSTRUCTION S ET C OMMANDS (P AGE 1 OF 3) V IEW C OMMANDS ASCII (H OST -S WITCHER ) R ESPONSE (S WITCHER -H OST ) Audio Gain V/ v GI n ·Aud Example V15G In 15• Aud - Ø 6 Example explanation: Virtual Input 15 Audio L ...

  • Extron electronic 6400 Series - page 40

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 4 • Programmer’s Guide Virtual Output MUTES VM 1 • 2 • • • • • 64 Mut Notes: 1. Start output is always Ø 1 for Room PRESET, because room has max. of 16 outputs assigned. 2. All “VI” values in responses are 2 numeric characters (i.e. 12 or Ø 3) or “na” indicatin ...

  • Extron electronic 6400 Series - page 41

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 4 • Programmer’s Guide E RROR C ODES IIf the switcher receives a command that is invalid or contains invalid parameters, it will return an Error Code response. The error code response has the format “Exx”. Following is a list of possible error code responses. Description of Erro ...

  • Extron electronic 6400 Series - page 42

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 4 • Programmer’s Guide RECONFIG25 = Individual mute change RECONFIG26 = RGB->SYNC delay change RECONFIG34 = A global preset has been saved RECONFIG35 = A room preset has been saved RECONFIG36 = All RGB Sync Delays initialized (Zapped to Ø sec) RECONFIG37 = All Audio Levels initi ...

  • Extron electronic 6400 Series - page 43

    5 Chapter Five Upgrades and T r oub leshooting Upgrade and T roubleshooting Procedures Installing Software Update (IC Chip) Sw apping RS-232/RS-422 P o r ts Changing the A C Fuse Upgrades Matr ix 3200/6400 Video Switcher ...

  • Extron electronic 6400 Series - page 44

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting 5-1 Upgrade and T roubleshooting Pr ocedures The following procedures may be done in the field. • Add Front Panel Controller (FPC 1000) - see below. • Installing a Software Upgrade - see Page 5-3. • Swapping RS-232 / RS-422 Ports - see Page 5-4. ...

  • Extron electronic 6400 Series - page 45

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting Matrix 3200/6400 Video BME Internal Access ______ Before opening the BME, turn power OFF and unplug the AC power cord. High voltages are present inside the BME and the FPC 1000 Front Panel Controller. Upgrades or repairs may require access to internal ...

  • Extron electronic 6400 Series - page 46

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting Installing A Software Update To install a software update, IC U9 or U6 (or both) on the Main Control printed circuit card is replaced. If the system consists of multiple BMEs, the software IC(s) in each BME’s Main Control PCB may need to be updated. ...

  • Extron electronic 6400 Series - page 47

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting Swapping BME #0 RS-232 / RS-422 P orts Swapping BME #0 RS-232/RS-422 ports (not required on BME #1 - BME #5) involves moving a ribbon cable from one Main Control card connector to another. Ribbon Cable Connectors The ribbon cables used in the Matrix 32 ...

  • Extron electronic 6400 Series - page 48

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting 5-5 T ro ubleshooting a Matrix 3200/6400 System Prob lem All Matrix 3200/6400 BME front panels include LEDs at the bottom of the panel which are bracketed and labeled DIAGNOSTICS. These LEDs (Figure 5-6.A) indicate the current status of the BME power s ...

  • Extron electronic 6400 Series - page 49

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting H I G H V O L T A G E C A U T I O N H I G H V O L T A G E C A U T I O N Fuse P O W E R S U P P L I E S C O M M U N I C A T I O N S P R I M A R Y T X R S 2 3 2 B M E R E M O T E S Y S T E M S T A T U S R E D U N D A N T R X D I A G N O S T I C S + V - V ...

  • Extron electronic 6400 Series - page 50

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting Figure 5-7.A Inserting an output video card into the BME. Matrix 3200/6400 Video Switcher Upgrade - Changing the Matrix Size Changing the matrix size of a Matrix 6400 Video Switcher may require adding or removing output Video circuit cards. Page 5-8 de ...

  • Extron electronic 6400 Series - page 51

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting 5-8 AC POWER INPUT FUSE: 250V 5.0A TT IN OUT 100-240V 5.0A MAX 50/60Hz DISCONNECT POWER CORD BEFORE SERVICING MKP COMM. BME COMM. RS232/RS422 A B C D E A B C D E BME ADDRESS ANAHEIM, CA MADE IN USA 4 - + INPUTS OUTPUTS OUT OUT OUT OUT OUT OUT OUT OUT 1 ...

  • Extron electronic 6400 Series - page 52

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting Adding BME(s) to a Matrix 3200/6400 System Figure 5-9.A Adding BMEs to a Matrix 3200/6400 system Adding BME(s) to an existing Matrix 3200/6400 System involves doing most of the same steps as an initial installation. Extron recommends that the following ...

  • Extron electronic 6400 Series - page 53

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting MATRIX 6400 VIDEO POWER SUPPLIES COMMUNICATIONS PRIMARY TX RS232 BME REMOTE SYSTEM STATUS REDUNDANT RX DIAGNOSTICS + V - V MATRIX 6400 VIDEO POWER SUPPLIES COMMUNICATIONS PRIMARY TX RS232 BME REMOTE SYSTEM STATUS REDUNDANT RX DIAGNOSTICS + V - V MATRIX ...

  • Extron electronic 6400 Series - page 54

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting Software Procedure – Before and After a Hardware Upgrade Prior to upgrading a Matrix 3200/6400 Video Switcher System, read the “Upgrade System – Software Procedure” below. The suggested procedure can save you a lot of time reconfiguring a syste ...

  • Extron electronic 6400 Series - page 55

    Extron • Matrix 3200/6400 Series • User’s Manual Chapter 5 • Upgrades and Troubleshooting After Hardware Changes Do the following steps AFTER the hardware upgrade has been installed: 1. From Windows open the Program Group or Folder called “Extron Electronics”. 2. Double click the “Matrix 6400 Control Pgm” icon to start the program. ...

  • Extron electronic 6400 Series - page 56

    Notes ...

  • Extron electronic 6400 Series - page 57

    A Appendix A Reference Inf ormation Switcher P ar t Numbers Related P ar t Numbers BNC Cables Glossar y of T erms Matr ix 3200/6400 Video Switcher ...

  • Extron electronic 6400 Series - page 58

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual Matrix 3200/6400 Series Part Numbers Part Numbers for Matrix 3200/6400 switchers use the following format: 60-25x-iofr where: x = 0 = Matrix 6400 Wideband x = 1 = Matrix 3200 Wideband x = 2 = Matrix 6400 Video x = 3 = Matrix 3200 Video x = 4 = Matrix 6400 Sy ...

  • Extron electronic 6400 Series - page 59

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual A-2 Matrix 3200/6400 Series Part Numbers (continued from previous page) Extron Part Part # Matrix 6400 Wideband Sw itcher 60-250-iofr Two io (Inputs/Outputs) characters = table matrix size coordinate points. f = Front Panel Controller (FPC), 0 = No, 1 = Yes ...

  • Extron electronic 6400 Series - page 60

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual A-3 Matrix 3200 Video Switcher 60-253-iofr Two io (Inputs/Outputs) characters = table matrix size coordinate points. f = Front Panel Controller (FPC), 0 = No, 1 = Yes r = Redundant Power Supply (RPS), 0 = No, 1 = Yes Examples: 60-253-DB01 = 32 Inputs/16 Outp ...

  • Extron electronic 6400 Series - page 61

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual Matrix 3200/6400 Series Part Numbers (continued from previous page) Extron Part Part # FPC 1000 (Matrix 6400 Seri es) 60-276-01 FPC 1000 (Matrix 3200 Seri es) 60-276-02 MKP 1000 (Gray) 60-239-01 MKP 1000 (Bl ack) 60-239-02 MKP 1000 (White) 60-239-03 MCP 1000 ...

  • Extron electronic 6400 Series - page 62

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual A-5 Pre-cut Cables The BNC-4 HR is used for RGBS cable runs and the BNC-5 is used for RGBHV cable runs, but either type can also be used for composite video, S-Video or RGB with sync on green. All Extron BNC cables have male gender connectors on both ends. A ...

  • Extron electronic 6400 Series - page 63

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual Glossar y of terms Following is a list of terms taken from Extron’s Glossary. AC – Alternating Current – Flow of electrons that changes direction alternately. ADA – Extron’s product designation for Analog Distribution Amplifier. AMPS – Amperes ? ...

  • Extron electronic 6400 Series - page 64

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual A-7 Component Video – Our color television system starts with three channels of information; Red, Green, & Blue (RGB). In the process of translating these channels to a single composite video signal they are often first converted to Y, R-Y, and B-Y. Bo ...

  • Extron electronic 6400 Series - page 65

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual High Impedance – Hi Z or High Z – In video, when the signal is not terminated locally and is going to another destination, where it will be terminated. In video, Hi Z is typically 10k ohms or greater. Horizontal Rate – Horizontal Frequency – The numb ...

  • Extron electronic 6400 Series - page 66

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual A-9 Output – The product of an operation by a device going to some external destination, such as another device, a video screen, image or hard copy. PAL – Phase Alternate Line – The phase of the color carrier is alternated from line to line. It takes f ...

  • Extron electronic 6400 Series - page 67

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual SECAM – Sequential Couleur Avec Memoiré – Translated as “Sequential Color with Memory”. A composite color transmission system that potentially eliminates the need for both a color and hue control on the monitor. One of the color difference signals i ...

  • Extron electronic 6400 Series - page 68

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual A-11 Matrix 3200 Video Switcher Virtualization Work-sheet ...

  • Extron electronic 6400 Series - page 69

    Appendix A • Reference Information Extron • Matrix 3200/6400 Series • User’s Manual Matrix 6400 Video Switcher Virtualization Work-sheet A-12 ...

  • Extron electronic 6400 Series - page 70

    Notes ...

  • Extron electronic 6400 Series - page 71

    FCC Class A Notice Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can rad ...

  • Extron electronic 6400 Series - page 72

    Extron Electronics, USA 1230 South Lewis Str eet Anaheim, CA 92805 USA 714.491.1500 F ax 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 F ax +31.33.453.4050 Extron Electronics, Asia 135 Joo S eng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 F ax +65.6383.4664 Extron ...

Produzent Extron electronic Kategorie Switch

Dokumente, die wir vom Produzenten des Geräts Extron electronic 6400 Series erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Extron electronic
- Bedienungsanleitungen 6400 Series
- Produktkarten Extron electronic
- Informationsbroschüren
- oder Energieetiketten Extron electronic 6400 Series
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Extron electronic 6400 Series.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Extron electronic 6400 Series, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Extron electronic 6400 Series. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Extron electronic 6400 Series ansehen.

Die komplette Bedienungsanleitung des Geräts Extron electronic 6400 Series, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Extron electronic 6400 Series hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Extron electronic 6400 Series verständlich ist.

Eine gänzliche Bedienungsanleitung von Extron electronic sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Extron electronic 6400 Series bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Extron electronic 6400 Series befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Extron electronic 6400 Series, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Extron electronic 6400 Series - die uns die ersten Schritte während der Nutzung von Extron electronic 6400 Series erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Extron electronic 6400 Series hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Extron electronic 6400 Series im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Extron electronic 6400 Series?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Extron electronic 6400 Series nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Extron electronic 6400 Series hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)