Bedienungsanleitung Poulan HDF825X

18 Seiten 0.37 mb
Download

Zur Seite of 18

Summary
  • Poulan HDF825X - page 1

    OPERA TOR'S MANU AL MODEL: HDF825X FRONT TINE TILLER AL WA YS WEAR EYE PROTECTION DURING OPERA TION Visit our website: www .poulan-pro.com WARNING: Read this Man u al and follow all Warnings and Safety Instructions. F ail ure to do so can re sult in serious in ju ry . IMPORT ANT MANU AL Do Not Throw Away 411044 01.05.07 CL Printed in U.S.A. ...

  • Poulan HDF825X - page 2

    2 • Keep children and pets away . • Do not overload the machine capacity by attempting to till too deep at too fast a rate. • Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing. • Never allow bystanders near the unit. • Use only attachments and accessories approved by the manufacturer of t ...

  • Poulan HDF825X - page 3

    3 PRODUCT SPECIFICA TIONS Gasoline Capacity: 3 Quarts (2.8L) Unleaded Regular Oil (API-SG-SL): SAE 30 (Above 32°F/0°C) (Capacity: 20 oz./0.6L) SAE 5w-30(Below 32°F/0°C) Spark Plug: Champion RC12YC (Gap: .030"/0.76mm) CONGRA TUL A TIONS on your purchase of a new tiller . It has been designed, en gi neered and manu fac tured to give you the ...

  • Poulan HDF825X - page 4

    4 AS SEMBL Y OPERA TOR’S POSITION (See Fig. 1) When right or left hand is mentioned in this manual, it means when you are in the operating position (standing behind tiller handles). Y our new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. T o ensure safe and proper operation of your ...

  • Poulan HDF825X - page 5

    5 UNP ACK CARTON & INST ALL HANDLE (See Fig. 2) CAUTION: Be careful of exposed sta ples when handling or disposing of cartoning material. IMPORT ANT : WHEN UNP ACKING AND AS SEM BLING TILLER, BE CAREFUL NOT TO STRETCH OR KINK CABLE(S). • Cut cable ties securing handles. • Slowly lift handle as sem bly up, route cable(s) as shown and align h ...

  • Poulan HDF825X - page 6

    6 KNOW YOUR TILLER READ THIS MANUAL AND SAFETY RULES BEFORE OPERA TING YOUR TILLER. Compare the illustrations with your tiller to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. REVERSE TINE CONTROL These symbols may appear on your Tiller or in literature supplied with the product. ...

  • Poulan HDF825X - page 7

    7 hand l es_9 4 FORWARD TINE CON TROL IN “OFF ” (UP) POSITION REVERSE CONTROL e n g i n e_ a r t _ 7 1 CHOKE CONTROL THROTTLE CONTROL FORWARD TINE CON TROL IN “ON” (DOWN) POSITION TINE OPERA TION (See Fig. 5) FORWARD • Squeeze forward tine control to handle. REVERSE • With forward tine control “OFF ” (up) position, pull back and hol ...

  • Poulan HDF825X - page 8

    8 TO TRANSPORT CAUTION: Before lifting or trans port ing, allow tiller engine and muffler to cool. Disconnect spark plug wire. Drain gasoline from fuel tank. AROUND THE Y ARD • Tip depth stake forward until it is held by the stake spring. • Push tiller handles down, raising tines off the ground. • Push or pull tiller to desired location. AROU ...

  • Poulan HDF825X - page 9

    9 engin e_ar t _ 71 BREAKING IN YOUR TILLER Break-in your belt(s), pulleys and tine control before you actually begin tilling. • Start engine, tip tines off ground by pressing handles down and engage tine control to start tine rotation. Allow tines to rotate for five minutes. • Check tine operation and adjust if necessary . See “TINE OPERA TI ...

  • Poulan HDF825X - page 10

    10 MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE C he ck E ngine O i l L eve l C hange E ngine O i l O i l P ivo t P oin t s I nspe ct A ir Sc reen I nspe ct S par k A rres t er / Muffl er Cl ean or R ep l a c e A ir Cl eaner C ar t ridge Cl ean E ngine Cyl inder F ins R ep l a c e S par k Plu g BEFORE EACH USE EVERY 25 HOURS E ...

  • Poulan HDF825X - page 11

    11 FIG. 11 e ngine_ar t _ 12 FIG. 12 OIL DRAIN PLUG OIL FILLER PLUG OIL LEVEL TEMPERATURE RANGE ANTICIPATED BEFORE NE X T OIL CHANGE SAE VISCOSITY GRADES -20 0 30 40 8 0 100 -30 -20 0 20 30 40 F C 32 -10 10 60 5W-30 SAE 30 oi l _vis c _ c har t1 _e MAINTENANCE AIR CLEANER SCREW COV ER AIR CLEAN ER CAR TRIDGE FIG. 13 Disconnect spark plug wire befor ...

  • Poulan HDF825X - page 12

    12 TILLER TO ADJUST HANDLE HEIGHT (See Fig. 15) F actory assembly has provided lowest handle height. Se lect handle height best suited for your tilling conditions. Handle height will be different when tiller digs into soil. • If a higher handle height is desired, loosen the four nuts securing handle panel to engine brackets. • Slide handle pane ...

  • Poulan HDF825X - page 13

    13 FIG. 18 NARROW TILLING/CUL TIVA TING - 12-3/4" P A TH (See Fig. 18) • Remove outer tines. t ine_ 6 INNER TINES ONL Y NOTE: When reassembling outer tines, be sure right tine assembly (marked “R”) and left tine assembly (marked “L ”) are mounted to correct side of tine shaft. SERVICE AND ADJUSTMENTS TINE OPERA TION CHECK (See Fig. 1 ...

  • Poulan HDF825X - page 14

    14 SERVICE AND ADJUSTMENTS b e lt s_ 10 FIG. 22 FORWARD MOTION (INSIDE) V -BEL T ENGINE PULLEY REVERSE IDLER ARM REVERSE IDLER PULLEY IDLER ARM PIN FIG. 21 FORWARD IDLER PULLEY REVERSE IDLER PULLEY ENGINE PUL - LEY FRONT VIEW REFERENCE REVERSE (OUTSIDE) V -BEL T FORWARD MOTION (INSIDE) V -BEL T TRANS MIS SION PUL LEY BEL T GUARD BOL T BEL T GUIDE R ...

  • Poulan HDF825X - page 15

    15 STORAGE ENGINE OIL Drain oil (with engine warm) and replace with clean oil. (See “ENGINE” in the Maintenance section of this man ual). CYLINDER(S) • Remove spark plug. • Pour 1 ounce (29 ml) of oil through spark plug hole into cylinder . • Pull starter handle slowly several times to distribute oil. • Replace with new spark plug. OTHE ...

  • Poulan HDF825X - page 16

    16 Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “TO ST ART ENGINE” in the Operation section. 3. Engine flooded. 3. W ait several minutes before attempting to start. 4. Dirty air cleaner . 4. Clean or replace air cleaner cartridge. 5. W ater in fuel. 5. Empty fuel tank and carburetor , and refill ...

  • Poulan HDF825X - page 17

    17 LIMITED W ARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from de- fects in materials and work man ship. For a period of two (2) years from date of purchase by the original consumer purchaser , we will repair or replace, at our option, without charge for parts or labor incurred in re ...

  • Poulan HDF825X - page 18

    This product has been expertly en gi neered and carefully manu fac tured to rigid quality stan dards. As with all mechanical products, some adjustments or part replacement may be necessary during the life of your unit. For P arts and service, contact our authorized distributor: call 1-800-849-1297 • For replacement parts, have available the follo ...

Produzent Poulan Kategorie Tiller

Dokumente, die wir vom Produzenten des Geräts Poulan HDF825X erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Poulan
- Bedienungsanleitungen HDF825X
- Produktkarten Poulan
- Informationsbroschüren
- oder Energieetiketten Poulan HDF825X
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Poulan HDF825X.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Poulan HDF825X, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Poulan HDF825X. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Poulan HDF825X ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Poulan HDF825X, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Poulan HDF825X hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Poulan HDF825X verständlich ist.

Eine gänzliche Bedienungsanleitung von Poulan sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Poulan HDF825X bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Poulan HDF825X befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Poulan HDF825X, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Poulan HDF825X - die uns die ersten Schritte während der Nutzung von Poulan HDF825X erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Poulan HDF825X hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Poulan HDF825X im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Poulan HDF825X?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Poulan HDF825X nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Poulan HDF825X hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)