Bedienungsanleitung Edelbrock 2010

25 Seiten 4.28 mb
Download

Zur Seite of 25

Summary
  • Edelbrock 2010 - page 1

    Edelbrock 2010 Camaro SS Supercharger Part #1596, #1597, #1598 & #1599 ...

  • Edelbrock 2010 - page 2

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 1 Edelbrock LLC, 2700 California Street, T orrance , CA 90503 T oll-Free T ech Line: 1-800-416-8628 Office/Sales Line: 310-781-2222 Thank you for purchasing the Edelb ...

  • Edelbrock 2010 - page 3

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 2 Due to the complexity of the Edelbrock E-Force Supercharging system, it is recommended that this system only be installed by a qualified professional with access to ...

  • Edelbrock 2010 - page 4

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 3 Bag #1 Bag #2 (2x) - M8 Washer (3x) - M8 x 1.25 x 20mm Hex Flange Bolt (1x) - M10 x 1.5 x 65mm Hex Flange Bolt (1x) - M10 x 1.5 x 65mm Socket Head Bolt (3x) - M8 x ...

  • Edelbrock 2010 - page 5

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 4 Bag #3 (11x) - M8 x 1.25 x 25mm Countersunk Socket Head Bolt (8x) - M6 x 1 x 45mm Hex Flange Bolt (4x) - M6 x 1 x 12mm Socket Head Bolt (1x) - 15/64” High Speed S ...

  • Edelbrock 2010 - page 6

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 5 Bag #5 (4x) - Coil Cover Bracket (1x) - Coil Cover Dipstick Grommet (4x) - Coil Cover Retainer Stud (4x) - Coil Cover Standoff (4x) - Coil Cover Bracket Grommet ...

  • Edelbrock 2010 - page 7

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 6 Intercooler Hose Assembly Heater Core Hose Assembly Intercooler Reservoir to W a ter Pump Hose Manifold to EV AP Solenoid Hose (18”) Intercooler Water Pump to Hea ...

  • Edelbrock 2010 - page 8

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 7 1. Open trunk and lift trunk liner to access plastic hold down. Unscrew plastic hold down then remove air compressor and foam support. 2. Use a 10mm socket to loose ...

  • Edelbrock 2010 - page 9

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 8 11. Disconnect the Mass Airflow Sensor connector . 12. Use a fla t head screwdriver to loosen the worm clamp holding the inlet tube to the air box lid then remove t ...

  • Edelbrock 2010 - page 10

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 9 22. Disconnect the two ignition harness connectors, the eight spark plug wires from the ignition coils and the eight fuel injector electrical connectors. 23. Use a ...

  • Edelbrock 2010 - page 11

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 10 32. Use a pair of hose clamp pliers to loosen the clamp retaining the vacuum hose to the brake booster fitting and disconnect the hose. It will be removed with the ...

  • Edelbrock 2010 - page 12

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 11 46. Install the new valley pla te on the engine carefully so as not to dislodge the o-rings and line up the bolt holes. 47. Apply anti-seize to the underside of th ...

  • Edelbrock 2010 - page 13

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 12 54. Apply blue Loctite to the threads of the M8 x 20mm bolt supplied in Bag #1 then use a 12mm socket and washer to install the smaller supplied idler pulley onto ...

  • Edelbrock 2010 - page 14

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 13 63. Use pliers to loosen the hose clamps and disconnect the two small upper radiator hoses. Use caution when removing and reinstalling hoses onto plastic fittings. ...

  • Edelbrock 2010 - page 15

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 14 79. Use compressed air to clean out any metal flakes then loosen the bolt and remove the drill guide. 80. Apply red Loctite retaining compound to the supplied cran ...

  • Edelbrock 2010 - page 16

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 15 94. Install the wa ter pump to heat exchanger hose on the passenger side inlet fitting of the heat exchanger and clock it until it contacts the lower radiator shro ...

  • Edelbrock 2010 - page 17

    105. Install the intercooler reser voir to water pump hose onto the outlet of the intercooler reservoir so tha t the other end will extend down to the inlet of the intercooler water pump. Secure the hose to the reservoir fitting with a supplied hose clamp. 106. Lo wer the intercooler reservoir and its a ttached hose down into the passenger side of ...

  • Edelbrock 2010 - page 18

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 17 116. Use a 10mm universal socket to install the M6 x 45mm intake manifold bolts supplied in Bag #3 and torque them to 89 in/lbs in the sequence shown below. 117. R ...

  • Edelbrock 2010 - page 19

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 18 126. Use a small flat blade screwdriver to remove the wire loom covers from the back of the ignition coil brackets. 127. Install the supplied rubber grommets into ...

  • Edelbrock 2010 - page 20

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 19 137. Use a 16mm wrench to install the coil cover standoffs on the valve covers. 138. Use a 10mm socket, the four stock bolts and the stock o-ring gasket to install ...

  • Edelbrock 2010 - page 21

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 20 147. Install the relay on the tab on the passenger side of the fuse box and the fuse housing on the brace directly in front of the fuse box using the body pins sup ...

  • Edelbrock 2010 - page 22

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 21 156. Reconnect the fog light electrical connectors and the fascia wiring harness connector on the passenger side. 157. Use a 10mm socket to reconnect the positive ...

  • Edelbrock 2010 - page 23

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 22 177. Start the car and allo w it to idle while closely inspecting the engine bay for any fuel or coolant leaks. Repair any leaks before operating vehicle! 178. Rem ...

  • Edelbrock 2010 - page 24

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 23 Additional Supporting Components Now that the horsepo wer potential of your Camaro has been substantially increased, Edelbrock strongly recommends upgrading the su ...

  • Edelbrock 2010 - page 25

    ©2011 Edelbrock LLC Part #1596, 1597, 1598 & 1599 Brochure #63-1598 Rev . 2/11 - AJ/mc Edelbrock E-Force Supercharger System for the 2010 Camaro SS Installation Instructions Page 24 Eibach produces springs with unparalleled precision and quality , using Hi-T en spring steel produced to exacting tolerances. Custom CNC coilers yield race quality ...

Produzent Edelbrock Kategorie Automobile Accessories

Dokumente, die wir vom Produzenten des Geräts Edelbrock 2010 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Edelbrock
- Bedienungsanleitungen 2010
- Produktkarten Edelbrock
- Informationsbroschüren
- oder Energieetiketten Edelbrock 2010
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Edelbrock 2010.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Edelbrock 2010, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Edelbrock 2010. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Edelbrock 2010 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Edelbrock 2010, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Edelbrock 2010 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Edelbrock 2010 verständlich ist.

Eine gänzliche Bedienungsanleitung von Edelbrock sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Edelbrock 2010 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Edelbrock 2010 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Edelbrock 2010, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Edelbrock 2010 - die uns die ersten Schritte während der Nutzung von Edelbrock 2010 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Edelbrock 2010 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Edelbrock 2010 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Edelbrock 2010?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Edelbrock 2010 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Edelbrock 2010 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (1)

Georg Bely

Инструкция подключения PANASONIC KX-PRXA10 на Русском языке