Bedienungsanleitung Liebherr 20707

14 Seiten 0.64 mb
Download

Zur Seite of 14

Summary
  • Liebherr 20707 - page 1

    Installation Instructions Combined fridge-freezer for integrated use, door-on-door HC 1011/1060 HC 1001/1050 020707 7084000 - 01 ...

  • Liebherr 20707 - page 2

    Contents 1 General safety information ........................... 2 2 Setting up the appliance ............................... 2 3 Changing the door hinges ............................ 3 3.1 To detach the soft stop mechanism.................. 3 3.2 Reversing the door ........................................... 3 3.3 Re-attaching the soft stop mecha ...

  • Liebherr 20707 - page 3

    u Examine the unit and packaging for shipping damage. Contact the carrier immediately if you suspect there is any damage. u Note the type (model, number), index, appliance/serial number, date of purchase and where purchased on the spaces provided in see Appliance Information. u Remove anything attached to the rear or side walls of appliance that wo ...

  • Liebherr 20707 - page 4

    u Screw in ball stud Fig. 3 ( 3) together with the soft stop mechanism Fig. 3 ( 2) in the fastening hole. u Re-attach all covers Fig. 2 ( 5,6,7,8) . 4 Kitchen Cabinet Construction This is a fully integrated appliance which means that it is fully enclosed by a kitchen cabinet. This type of cabinet must be carefully constructed using the proper dimen ...

  • Liebherr 20707 - page 5

    Fig. 6 u In the cabinet base, cut out a ventilation opening that is 17-23/32 in. ( 450 mm) in width and 2-7/32 in. (56 mm ) in height. u Insert ventilation grille Fig. 6 ( 3) into the cabinet base cut- out Fig. 6 ( 1) . u From the back side, slide the snap-fits Fig. 6 ( 2) into the grille until the hooks make contact with the cabinet base. u Comple ...

  • Liebherr 20707 - page 6

    w The floor and side walls must be at right angles to each other. The joint between the upper and the lower kitchen cabinet door must align with the joint between the upper and lower appliance door. Follow distance L to the wall to allow the drawers to be pulled out properly. u Follow the dimensions provided in Fig. 6 . 4.3 Designing the Kitchen Ca ...

  • Liebherr 20707 - page 7

    Fig. 7 1 Unit door fridge compartement 3 Fridge compartement door 2 Unit door freezer compartement 4 Freezer compartement door The freezer door height is 24-24/32 in. (629 mm). u To cover the lower part of the appliance: increase the height of the panel to 27-3/32 in. (695 mm). The thickness of the floor board is usually 3/4 in. (19 mm). u To cover ...

  • Liebherr 20707 - page 8

    u The total opening of the cabinet (i.e. 70-3/8 in. (1788 mm)) plus the thickness of the top as well as the floor board (usually 3/4 in. (19 mm )) minus the height of the freezer door panel (xxx in. (xxx mm)) as calculated above and subtract the width of the gap (approximately 1/8 in. (3 mm)): 70-3/8 in. + 3/4 in. + 3/4 in. - xxx in. - 1/8 in. = 71 ...

  • Liebherr 20707 - page 9

    Note u Before assembling the unit door, make sure that the permitted weight for the unit doors is not exceeded. u Otherwise damage to the hinges and malfunctions arising from this cannot be ruled out. Maximum weight of unit door Fridge compartment door 30.5 lbs (14 kg) Freezer compartment door 26.5 lbs (12 kg) 6.1 Assembling the appliance Fig. 9 u ...

  • Liebherr 20707 - page 10

    For appliances with a fixed water supply for the IceMaker: * u Connect the IceMaker as indicated the section entitled Water Supply.* u Fit the locking clip Fig. 11 ( 62) .* Fig. 11 * All appliances: u Push the appliance 3/4 of the way into the recess. u Remove the covers Fig. 9 ( 5,6,7) . u Screw Fig. 12 ( 61) the equalizer trim Fig. 12 ( 20) to th ...

  • Liebherr 20707 - page 11

    u Slightly loosen the screws Fig. 20 ( 55) . u Secure the top mounting bracket Fig. 20 ( 50) to the unit wall with a ø4x19 chipboard screw Fig. 20 ( 29) . u Break off the protruding end of the cover Fig. 20 ( 53) . Fig. 20 u Tighten the screws Fig. 20 ( 55) . u Place the cover Fig. 20 ( 53) in position. On the handle side at the bottom: u Slightly ...

  • Liebherr 20707 - page 12

    Ensure that both metal edges are flush, symbol // : u Drill pilot holes in the door of the unit (you could make a preliminary hole with a bradawl). Fig. 25 u Fasten the appliance door to the unit door with screws Fig. 25 ( 41) through the mounting brackets Fig. 25 ( 34) . Fig. 26 u To align the unit door in depth Z : Undo the screws Fig. 26 ( 36) a ...

  • Liebherr 20707 - page 13

    7 Connecting the appliance WARNING Electrical shock hazard! u Start-up should only take place once the appliance has been installed according to these instructions. u Electrically ground appliance. u Do not ground to a gas pipe. u Check with a qualified electrician if you are not sure the appliance is properly grounded. u Do not have a fuse in the ...

  • Liebherr 20707 - page 14

    Connecting the appliance 14 ...

Produzent Liebherr Kategorie Refrigerator

Dokumente, die wir vom Produzenten des Geräts Liebherr 20707 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Liebherr
- Bedienungsanleitungen 20707
- Produktkarten Liebherr
- Informationsbroschüren
- oder Energieetiketten Liebherr 20707
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Liebherr 20707.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Liebherr 20707, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Liebherr 20707. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Liebherr 20707 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Liebherr 20707, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Liebherr 20707 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Liebherr 20707 verständlich ist.

Eine gänzliche Bedienungsanleitung von Liebherr sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Liebherr 20707 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Liebherr 20707 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Liebherr 20707, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Liebherr 20707 - die uns die ersten Schritte während der Nutzung von Liebherr 20707 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Liebherr 20707 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Liebherr 20707 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Liebherr 20707?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Liebherr 20707 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Liebherr 20707 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)