-
AEG 76800 - page 1
LAVAMA T 76800 Wa s h i n g M a c h i n e User information ...
-
AEG 76800 - page 2
2 Dear Customer , Please read this user information car e fully and keep it to r efer to later . Please pass the user information on to any futur e owner of the appli- ance. The following symbols are used in the text: 1 Safety instructions War n i n g ! Information that affects your per sonal safety . Important! Information that prevents damage to ...
-
AEG 76800 - page 3
3 Contents Oper ating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
AEG 76800 - page 4
4 Installation and conn ection instructions . . . . . . . . . . . . . . . . . 25 Safety information concerning installation . . . . . . . . . . . . . . . . . . . . . . . . 25 Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Tr ansporting the appliance . . . . . . . . . . . . . . . . . . . ...
-
AEG 76800 - page 5
5 Oper ating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions” . • If the appliance is delivered in the winter months when ther e ar e mi- nus temperatur es: store the washing machine at r oom temperatur e for 24 hours befor e using for the first time. Corr ect use ...
-
AEG 76800 - page 6
6 • Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug fr om the power point or – if the appliance has been har d-wired – sw itch off the cut- out in the fuse box or completely remove the fuse. • If operation is stopped, disconnect the appliance from the mains sup- ply and tu ...
-
AEG 76800 - page 7
7 Description of the appliance Contr ol panel Deterg ent drawer Screw feet (height adjustable) Plinth flap/ Drain pump Rating plate (behind door) Control panel DELA Y TIMER button Spin/RINSE HOLD butt on OVERDOSING indicator Prog ramme pr ogress d isplay Multi-display Progr amme selector STAR T/P AUSE button DOOR indicator A dditional pr ogramme bu ...
-
AEG 76800 - page 8
8 Pr ogr amme overview Programme max. load 1) (dry washing) 1) A 1 0 litre bucket contains appr ox. 2.5 kg dry washing (cotton) Additional pr ogrammes Spin speed RINSE HOLD RINSE + TIME SAVER PRE W ASH STAIN SENSITIVE 1600 10 0 0 70 0 500 ENERGY SAVING 2) 2) Programme settings for tests in accor dance with or in the style of EN 60 456 and IEC 60 45 ...
-
AEG 76800 - page 9
9 Application/Features Car e symbols 1) 1) The figures in the care symbol s indicate the maximum t emperatur es. Energy-sav ing progr amme which washes a t 60 °C for lightly to normally soiled whites or colour eds made of cotton/lin en. M O Progr amme for normally to heavily soiled whites/co loureds made of cotton/l inen. J M O Progr amme for cott ...
-
AEG 76800 - page 10
10 Befor e the first wash To remove any pr oduction-related r esidues from the drum and water tank, perform t he first wash cycle without washing. Programme: CO T- TONS/LINEN 60, pr ess the TIME SAVER button, add approx. 1/4 measur- ing cup of detergent. Pr eparing and sorting washing Preparing washing • Empty the pockets. Remove foreign bodies ( ...
-
AEG 76800 - page 11
11 Running a wash cycle Opening the door/loading washing 1. Open the door: pull the handle on the door . When the appliance is switched on , the DOOR and START/P AUSE indica- tors show whether the door can be opened: During the progr amme the door is locked when the water level or the temperatur e is high. The DOOR indicator is not illuminated. 2. ...
-
AEG 76800 - page 12
12 1. Pull out the detergent dr awer as far as it will go. 2. Add the detergent/condit ioner . 3. Push the deter gent drawer in fully . Washing powder/tablets fo r the main wash cycle If you are using water softener and r equire the right compartment for detergent for the pre-wash cycle, a dd the water softener on top of the detergent for the main ...
-
AEG 76800 - page 13
13 Switching on the applia nce/selecting a pr ogramme Set the progr amme and tempera- tur e using the pr ogr amme selector . 3 The appliance is switched on by se- lecting a progr amme. – The progr amme progr ess display shows the pr ogramme steps that the selected progr amme will car- ry out. – The estimated progr amme dura- tion (in minutes) a ...
-
AEG 76800 - page 14
14 Selecting additional pr ogrammes If requir ed, press additional pr o- gramme button(s). The corr espond- ing indicator will illuminate. 3 If “ Err ” flashes in the multi-disp lay , the selected additional progr amme cannot be used together with the wash progr amme set. RINSE + Two additional rinse cycles ar e carried out for the programmes E ...
-
AEG 76800 - page 15
15 Setting the delay timer 3 Using the DELA Y TIMER button you can delay the start of a pr ogramme by 30 minutes ( 30 ') to a maximum of 23 hours ( 23h ). 1. Select the progr amme. 2. Press the DELA Y TIMER button repeated ly until the desired start delay is shown in the multi-display , e.g. 12 h to delay the start of the pro- gramme by 12 hou ...
-
AEG 76800 - page 16
16 Interrupting a pr ogramme/adding washing Interrupting a progr amme • A pr ogramme can at any time be in terrupted by pressing the ST ART/ PAUSE button and resumed by pr essing START/P AUSE again. • To cancel a pr ogramme befor e it has ended, turn the pr ogramme se- lector to OFF . Important: Be careful of water in the appliance. Adding wash ...
-
AEG 76800 - page 17
17 Child safety device If the child safety device has been activated, the door can no longer be shut. Activating the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go. 1 War n i n g ! The knob must not be de- pressed after being set, otherwise the child safety device is not ...
-
AEG 76800 - page 18
18 Cleaning and car e Important: Do not use furniture cleaning pr oducts or aggressive clean- ing agents to clean the appliance. Wipe over the control panel and housing with a damp cloth. Deter gent drawer The detergent dr awer should be cleaned r egularly . 1. Remove the detergent dr awer by pulling firmly . 2. Remove the softener insert from the ...
-
AEG 76800 - page 19
19 What to do if... Remedying small faults yourself If during use of the appliance one of the following error codes is shown in the multi-display: – E10 (Pr oblems with the water inflow), – E20 (Pr oblems with the water outflow), – E40 (door open), please consult the following table. After the error has been r emedied, press the ST ART / PAUS ...
-
AEG 76800 - page 20
20 E10 appear s. The END indicator is flashing once, and si- multaneously an acous- tic signal is so unding once. (Problems w ith the wa- ter inflow .) The tap is sh ut off. Turn on the tap. The filter in the inlet hose screw connection is blocke d. Turn off the tap. Unscrew t he hose, remo ve the filter and clean it. The tap is blocked by limes- c ...
-
AEG 76800 - page 21
21 If the wash r esult is not satisfactory The washing is grey and there ar e limescale deposits in the drum • Too little deter gent was used. • An incorrect deter gent was used. • Individual stains were not pr e-treated. • The progr amme or temperatur e was not set pr operly . There ar e grey stains on the washing • Items that were soile ...
-
AEG 76800 - page 22
22 There ar e white residues on the washing • What can be seen here are insoluble substances which modern deter- gents contain. They ar e not the r esult of insufficien t rinsing. Shake or brush the washing. If possible turn the washing inside out before washing. Check your selection of deter gent and perhaps use liquid detergent instead. Carryin ...
-
AEG 76800 - page 23
23 Dr ain pump The drain pump is maintenance-fr ee. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e.g. if the pump wheel is blocked. Before loading the machine, please always ensure that ther e are no for- eign bodies present in the pockets or in between the items to be washed. P aper ...
-
AEG 76800 - page 24
24 T echnical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low V oltage Directive – 89/336/EEC dated 03.05.1989 EMC Di rective inclusive of Amending Directive 92/3 1/EEC – 93/68/EEC dated 22.0 7.199 3 CE Marking Dire ctive Consumption values The consumption values wer e obtained under standar d ...
-
AEG 76800 - page 25
25 Installation and connection instructions 1 Safety information concerning installa- tion • This washing machine cannot be built-in . • Before using for the fir st time, ch eck the appliance for damage sus- tained while it was being transpor ted. Do not under any circumstanc- es connect an appliance that is damaged to the mains. In the event o ...
-
AEG 76800 - page 26
26 Installing the appliance T ransporting the appliance 1 War n i n g : The washing machine is very heavy . There is a risk of injury . Exercise car e when lifting the appliance. • Do not lay the w ashing machine on its front nor on its right side (as seen fr om the front). Elec trical components may get wet. • Never transport the appliance wit ...
-
AEG 76800 - page 27
27 3 Special spanner A and sealing caps B (2 units) and C (1 unit) come with the appliance. 3. Use special spanner A to remove screw D and the compr ession spring. 4. Use sealing cap C to cap the hole. 5. Use special spanner A to remove the two screws E. 6. Use special spanner A to remove the four screws F . 7. Remove transit bar G. 8. Sc re w i n ...
-
AEG 76800 - page 28
28 Making the appliance level The four feet of the appliance are pre-adjusted. Large degr ees of unevenness can be compensated for by adjusting the four feet of the appliance. Use the special spanner supplied to do this. Important: Do not use pieces of wood, cardboar d or such like to level out small degr ees of unevenness in the floor . Adjust the ...
-
AEG 76800 - page 29
29 Electrical Connection Any electrical work requir ed to inst all this appliance should be carried out by a qualified electrician or competent person. 1 WARNING – THIS APPL IANCE MUST BE EARTHED. The manufacturer declines any liabili ty should these safety measur es not be observed. Before switching on, make sur e th e electricity supply voltage ...
-
AEG 76800 - page 30
30 The switch must not break the yellow and green earth cable at any point. This appliance complies with the r e quirements laid out in the EEC Di- rective 76/899. Voltage 240 V AC: Fuse rating 13 amps See rating plate for further information. This appliance meets VDE requir ements. P articular regulations of local electricity authorities must be o ...
-
AEG 76800 - page 31
31 W ater inlet A 1.35 m long pressure hose is supplied with the appliance. If a longer inlet hose is required, only hoses fr om the manufacturer ar e to be used. Service Force stocks hose kits of differ ent lengths. 3 Sealing rings are either inserted in th e plastic nuts of the thr eaded hose fitting or are included as spar e pa rts. Do not use a ...
-
AEG 76800 - page 32
32 Wa t e r D ra i n a g e The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed usin g the plas tic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring ther e is an air br eak between the drain hose and standpipe. Important! It is essentia ...
-
AEG 76800 - page 33
33 Pumping heights of over 1 metr e The washing machine’s drain pump is able to pump water to a height of 1 me tre, calculated fr om the surface on which the appliance is installed. Important! If pumping height is over 1 metre malfunctions and dam- age to the appliance may arise. For pumping heights over 1 metre a conversion kit can be obtained. ...
-
AEG 76800 - page 34
34 W arr anty conditions Gr eat Britain Standard guarantee conditions We, AEG, undertake that if withi n 12 months of the date of the purchase this AEG appliance or any part ther eof is prove d to be defective by r eas on only of faulty workmanship or materials, we will, at our discr etion repair or r eplace the same FREE OF CHARGE for labour , mat ...
-
AEG 76800 - page 35
35 Service and Spar e P arts If the event of your appliance r equir ing service, or if you wish to pur- chase spare parts, please contact Service For ce by telephoning: Y our telephone call will be automatically routed to the Service For ce Centre covering your post code area. For the address of your local Servic e Force Centre and further informa- ...
-
AEG 76800 - page 36
From the El ectrolux Gr oup . The world´s No.1 choice. The Electrolux Gr oup is the world´s largest pr oducer of powere d appliances for ki tchen, cleaning and outdoor use. More than 55 million Electrolux Gr oup products (such as refrigerators, c ookers, washing machines, vacuum cleaners, chain saws and lawn mowers) ar e sold each year to a va lu ...
Haben Sie eine Frage bezüglich AEG 76800?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit AEG 76800 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit AEG 76800 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.