-
Invacare Force - page 1
Owner’s Operator and Maintenance Manual DEALER: This manual MUST be given to the user of the handcycle. USER: BEFORE using this handcycle, read this manual and save for future reference. For more information regarding Invacare products, parts, and services, please visit www.invacare.com Recumbent Handcycle Series Top End XLT™ Top End XLT Jr. To ...
-
Invacare Force - page 2
Recumbent Handcycle Series 2 Part No 1114850 WARNING DO NOT USE THIS PRODUCT OR ANY AVAILABLE OPTIONAL EQUIPMENT WITHOUT FIRST COMPLETELY READING AND UNDERSTANDING THESE IN STRUCTIONS AND ANY ADDITIONAL INSTRUCTIONAL MA TERIAL SUCH AS OWNER’S MANUALS, SERVICE MANUALS OR INSTRUCTION SHEETS SUPPLIED WITH THIS PRODUCT OR OPTIONAL EQUIPMENT. IF Y ...
-
Invacare Force - page 3
TABLE OF CONTENTS Part No 1114850 3 Recumbent Handcycle Series TABLE OF CONTENTS REGISTER YOUR PR ODUCT ............................................................... 7 DEALER/TECHNICIAN INFORMATION ............................................... 8 SPECIAL NOTES ................................................................................ 8 TYP ...
-
Invacare Force - page 4
TABLE OF CONTENTS Recumbent Handcycle Series 4 Part No 1114850 TABLE OF CONTENTS SECTION 5—OPERAT ION ................................................................ 26 Riding the Handcycle .... .................................................................... .................. ................. ....................26 Shifting Gears ........ ...
-
Invacare Force - page 5
TABLE OF CONTENTS Part No 1114850 5 Recumbent Handcycle Series TABLE OF CONTENTS SECTION 8—SERVICE PROCEDURES ................................................. 46 Replacing the Fork/Crank Assembly ...................... ........................................................................ ......46 Replacing the Crank Arms - XLT Gold, XLT PRO a ...
-
Invacare Force - page 6
TABLE OF CONTENTS Recumbent Handcycle Series 6 Part No 1114850 TABLE OF CONTENTS SECTION 9—OPTI ONS ..................................................................... 60 Installing Rear Safety Li ght .................. ............................................. .......................................................60 Batteries ............ ...
-
Invacare Force - page 7
REGISTER YOUR PRODUCT Part No 1114850 7 Excelerator™XLT Handcycle Series For Models Made After 7/ 12/07 ..................... ............................................. .................. .............. .....65 Installing Gloves ............. ............................................. .................................... ................... ...
-
Invacare Force - page 8
DEALER/TECHNICIAN INFORMATION Recumbent Handcycle Series 8 Part No 1114850 DEALER/TECHNICIAN INFORMATION The term ʺ qualified technician ʺ in this manual refe rs to an Inv acare qualified technician or a Shimano ® certified bicycle repair technician. SPECIAL NOTES Signal ? ...
-
Invacare Force - page 9
SPECIAL NOTES Part No 1114850 9 Recumbent Handcycle Series WARNING ALWAYS wear your seat positi oning strap. Inasmu ch as the seat posi tioning strap is an option on this handcycle (you may or der with or without the seat positioning strap), Invacare strongly recommends ordering the se at positioning strap as an additional safeguard for the han ...
-
Invacare Force - page 10
TYPICAL PRODUCT PARAMETERS Recumbent Handcycle Series 10 Part No 1114850 TYPICAL PRODUCT PARAMETERS *NOTE: Knobby tires will red u c e side wheel clearance to approximately 1 ‐ inch. TOP END XLT TOP END XLT JR Seat Width: 14 to 20 inches 14 inches Seat Depth: 15 inches 15 inches Seat-to-Floor (approx.): 12, ...
-
Invacare Force - page 11
TYPICAL PRODUCT PARAMETERS Part No 1114850 11 Recumbent Handcycle Series *NOTE: Knobby tires will red u c e side wheel clearance to approximately 1 ‐ inch. TOP END XLT PRO TOP END XLT GOLD Seat Width: 14 to 18 inches 14 to 18 inches Seat Depth: 15 inches 15 inches Seat-to-Floor (approx.): 12, 13 and 14 inch ...
-
Invacare Force - page 12
SECTION 1—GENERAL GUIDELINES Recumbent Handcycle Series 12 Part No 1114850 SECTION 1—GENERAL GUIDELINES WARNING SECTION 1 - GENERAL GUIDELIN ES contai ns important inform ation for the safe operation and use of this product. Proper Fit The handcycle MUST be adjusted to fit the rider . For a proper ...
-
Invacare Force - page 13
SECTION 1—GENERAL GUIDELINES Part No 1114850 13 Recumbent Handcycle Series To p End XL T , XL T jr ., and XL T Gold Models Only ‐ The parking brake of the han dcycle MUST be engaged before attempting an y transfer . To p End XL T Pro Mo ...
-
Invacare Force - page 14
SECTION 1—GENERAL GUIDELINES Recumbent Handcycle Series 14 Part No 1114850 Tire Pressure DO NOT use you r hand cycle unless it has the proper tire pressure (p.s.i.). DO NOT overinflate the tires. Failure to follow these suggestions may cause the ? ...
-
Invacare Force - page 15
SECTION 2—SAFETY AND HANDLING Part No 1114850 15 Recumbent Handcycle Series SECTION 2—SAFETY AND HANDLING Safety and Handling of the Handcycle Requires the close attention of the user as we l l as the assistant. This manual points out the most common procedures and ...
-
Invacare Force - page 16
SECTION 2—SAFETY AND HANDLING Recumbent Handcycle Series 16 Part No 1114850 Percentage of Weight Distribution T ransferring in an d out of the handcycle will cause a change to the normal balance, the center of gravity , and the we i g h t distribution of ? ...
-
Invacare Force - page 17
SECTION 2—SAFETY AND HANDLING Part No 1114850 17 Recumbent Handcycle Series NOTE: During independent transfer , little or no seat platform will be beneath you. Although it may be difficult to wedge the transfer board between the handcycle seat ...
-
Invacare Force - page 18
SECTION 3—SAFETY INSPECTION Recumbent Handcycle Series 18 Part No 1114850 SECTION 3—SAFETY INSPECTION Safety Inspection Checklist NOTE: Every six months, take your To p End XL T to a qualified technician for a thor ough inspection and servicing. Regular cleaning ...
-
Invacare Force - page 19
SECTION 3—SAFETY INSPECTION Part No 1114850 19 Recumbent Handcycle Series ❑ Inspect seat positioning strap for any signs of w ear . Ensure buckle latches. Ve r i f y hardw are that attaches strap to frame is secure and undamaged. Replace if neces ...
-
Invacare Force - page 20
SECTION 3—SAFETY INSPECTION Recumbent Handcycle Series 20 Part No 1114850 Inspect/Adjust Monthly ❑ Inspect for bent or broken frame. ❑ Ensure that casters are free of debris. Inspect/Adjust Periodically ❑ Inspect for bent or broken frame. ❑ Inspect parking brake ? ...
-
Invacare Force - page 21
SECTION 3—SAFETY INSPECTION Part No 1114850 21 Recumbent Handcycle Series Troubleshooting Maintenance Maintenance Safety Precautions WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely - othe rwise injury or damage may result. CAUTION DO NOT overtighten hardware attaching to ...
-
Invacare Force - page 22
SECTION 3—SAFETY INSPECTION Recumbent Handcycle Series 22 Part No 1114850 3. If equipped, keep quick release axles free of dirt and lint to ensure positive locking and proper operation. Refer to Installing/Adjusting the Rear Wheel and Quick ‐ Rel ...
-
Invacare Force - page 23
SECTION 4—INITIAL SETUP Part No 1114850 23 Recumbent Handcycle Series SECTION 4—INITIAL SETUP WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely - othe rwise injury or damage may result. DO NOT operate the handcycle if the hand crank obstruct s your view. If the hand cran ...
-
Invacare Force - page 24
SECTION 4—INITIAL SETUP Recumbent Handcycle Series 24 Part No 1114850 FIGURE 4.1 Initial Setup Top End XLT/XLT Jr. Top End XLT PRO Rear Wheel Back Seat Hand Cr ank Assembl y/ Reversing Drum Brake Shifter Location Chain Parking Brake Cable Footrest Rear Wheel Back Seat Chain Brake Cable Footrest NOTE: Parking brake located on l ...
-
Invacare Force - page 25
SECTION 4—INITIAL SETUP Part No 1114850 25 Recumbent Handcycle Series FIGURE 4.2 Initial Setup Top End Force Rear Wheel Back Seat Chain Rapid-Fire Hand Brake/Shifter Footrest Hand Crank Assembly Top End XLT Gold Rear Wheel Back Seat Chain Rapid-Fire Hand Brake/Shifter Footrest Hand Crank Assembly ...
-
Invacare Force - page 26
SECTION 5—OPERATION Recumbent Handcycle Series 26 Part No 1114850 SECTION 5—OPERATION WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely - othe rwise injury or damage may result. Riding the Handcycle WARNING Before operating the handcycle, review the Ge neral Guidelin ...
-
Invacare Force - page 27
SECTION 5—OPERATION Part No 1114850 27 Recumbent Handcycle Series 8. Rotate (pedal) the hand crank forw ard (tow ard the front) to propel the handcycle forw ard. 9. T op End XL T and XL T Jr . Models Only ‐ Rotate (pedal) the hand crank bac ...
-
Invacare Force - page 28
SECTION 5—OPERATION Recumbent Handcycle Series 28 Part No 1114850 Hands-On Rapid Fire Shifter/Brak e System: Twenty-seven Speeds NOTE: For this proced ure, ref e r to FIGURE 5.3 on page 29. NOTE: This procedur e applies to the To p En d XL T Pro, XL T Gold, and ? ...
-
Invacare Force - page 29
SECTION 5—OPERATION Part No 1114850 29 Recumbent Handcycle Series FIGURE 5.3 Shifting Gears - Hands-On Rapid Fire Shifter/Brake System: Twenty-seven Speeds - Hands-On Rapid Fire Shifter/ Brake System: Twen ty-seven Speeds Backing-Up Use th e rear wheels (i.e. like a manual handcycle) to backup. When ...
-
Invacare Force - page 30
SECTION 5—OPERATION Recumbent Handcycle Series 30 Part No 1114850 Hand Brakes/Hands-On Brakes WARNING The twenty-seven speed cassette on the Top End XLT Pro, XLT Gold and Top End Force models use the hand brake as th e primary brake. Rev erse pedaling WILL NOT stop the bike. Handcycles equipped with Hand Brakes - In situations where caution i ...
-
Invacare Force - page 31
SECTION 5—OPERATION Part No 1114850 31 Recumbent Handcycle Series •T o Disengage the P arking Brake ‐ Squeeze and release the ratchet button. FIGURE 5.5 Using Parking Brake Steering/Cornering WARNING DO NOT attempt to corn er the handcycle at hi gh speeds. This coul d result in a fall causing inju ...
-
Invacare Force - page 32
SECTION 6—RIDING POSITION Recumbent Handcycle Series 32 Part No 1114850 SECTION 6—RIDING POSITION WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely - othe rwise injury or damage may result. Replacing/Adjusting the Footrest and Leg Guard NOTE: For this proced ...
-
Invacare Force - page 33
SECTION 6—RIDING POSITION Part No 1114850 33 Recumbent Handcycle Series Using/Replacing Footrest Strap WARNING Footrest straps MUST be insp ected before each use. Exposu re to moi sture (i.e.- wet weather or puddles) will dama ge fastening strips. Footrest strap will not hol d feet securely in footrest if fastening strips are damaged. DO NOT ...
-
Invacare Force - page 34
SECTION 6—RIDING POSITION Recumbent Handcycle Series 34 Part No 1114850 Adjusting Hand Crank WARNING DO NOT operate the handcycle if the hand crank obstruct s your view. If the hand crank obstructs your view, ad just the height before usin g the handcycle - otherwis e injury or damage may occur. Adjusting Hand Crank Height - All Models Except ...
-
Invacare Force - page 35
SECTION 6—RIDING POSITION Part No 1114850 35 Recumbent Handcycle Series Adjusting Top End XLT Gold Hand Crank NOTE: For this proced ure, ref e r to FIGURE 6.5. Adjusting Hand Crank Height 1. Loosen, but DO NOT remove th e hex nut securing the hand crank to the fork ? ...
-
Invacare Force - page 36
SECTION 6—RIDING POSITION Recumbent Handcycle Series 36 Part No 1114850 Adjusting Seat Fore/Aft - Al l Models Except XLT Gold and Top End Force NOTE: For this procedur e, ref e r to FIGURE 6.6. NOTE: Seat should be adjusted so that when seated with feet in the footrests, ...
-
Invacare Force - page 37
SECTION 6—RIDING POSITION Part No 1114850 37 Recumbent Handcycle Series Adjusting Seat Fore/Aft - XLT Gold and Top End Force Only NOTE: For this proced ure, ref e r to FIGURE 6.7. NOTE: Seat should be adjusted so that when seated with feet in the footrests, ther e ...
-
Invacare Force - page 38
SECTION 6—RIDING POSITION Recumbent Handcycle Series 38 Part No 1114850 Adjusting Seat Height - A ll Models Except XLT Gold and Top End Force NOTE: For this proced ure, ref e r to FIGURE 6.8. 1. Loosen, but DO NOT remove the four socket screws securing the rear of the ...
-
Invacare Force - page 39
SECTION 6—RIDING POSITION Part No 1114850 39 Recumbent Handcycle Series Adjusting Back Angle - All Models Except XLT Gold and Top End Force NOTE: For this proced ure, ref e r to FIGURE 6.9. 1. If installed activ ate parking brake. 2. Loosen, but DO NOT remove the four rear so ...
-
Invacare Force - page 40
SECTION 6—RIDING POSITION Recumbent Handcycle Series 40 Part No 1114850 Adjusting Back Angle - XLT Gold NOTE: For this proced ure, ref e r to FIGURE 6.10. 1. Loosen, but DO NOT remove, th e two socket screws located in the seat angle adjustment clamp. 2. P erform ...
-
Invacare Force - page 41
SECTION 6—RIDING POSITION Part No 1114850 41 Recumbent Handcycle Series Adjusting Back Height - Wide Back Option Only NOTE: For this proced ure, ref e r to FIGURE 6.1 1. NOTE: This procedur e applies to To p End XL T mode ls with wide back option only . 1. Remove the ...
-
Invacare Force - page 42
SECTION 7—WHEELS Recumbent Handcycle Series 42 Part No 1114850 SECTION 7—WHEELS WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely - othe rwise injury or damage may result. Installing/Adjusting the Rear Wheel and Quick-Release Axles NOTE: For this proced ure, ...
-
Invacare Force - page 43
SECTION 7—WHEELS Part No 1114850 43 Recumbent Handcycle Series Installing the Rear Wheels with Threaded Axles NOTE: For this proced ure, ref e r to FIGURE 7.2. 1. Apply a small amount of grease onto the axle. 2. Insert the axle int o the axle mounting hole on ...
-
Invacare Force - page 44
SECTION 7—WHEELS Recumbent Handcycle Series 44 Part No 1114850 Determining/Adjusting Toe In/Toe Out NOTE: For this proced ure, ref e r to FIGURE 7.3. Determining Toe In/Toe Out 1. Inflate all pneumatic tires to recommended tire pressures (listed on the si dewall of the ? ...
-
Invacare Force - page 45
SECTION 7—WHEELS Part No 1114850 45 Recumbent Handcycle Series Adjusting Toe In/Toe Out 1. Loosen, but DO NOT remove the socket screws and clamps that secure camber inserts to the camber bar (Detail ʺ A ʺ ). 2. Slowly rotate the camber insert until ? ...
-
Invacare Force - page 46
SECTION 8—SERVICE PROCEDURES Recumbent Handcycle Series 46 Part No 1114850 SECTION 8—SERVICE PROCEDURES WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely - othe rwise injury or damage may result. Replacing the Fork/Crank Assembly NOTE: For this proced ure, ? ...
-
Invacare Force - page 47
SECTION 8—SERVICE PROCEDURES Part No 1114850 47 Recumbent Handcycle Series 19. Slide the bottom bearing onto the new fork. Refer to FIGURE 8.1 for correct orientation. 20. Slide the new fork into the frame. 21. P osition the o ‐ ring and bearing on ? ...
-
Invacare Force - page 48
SECTION 8—SERVICE PROCEDURES Recumbent Handcycle Series 48 Part No 1114850 FIGURE 8.1 Replacing the Fork/Crank Assembly STEPS 1, 2, 3, 36, 37 STEPS 8, 31 STEPS 6, 7, 34 STEPS 10, 11, 30, 31 STEPS 5, 17, 18, 19, 20, 21, 22, 35 STEPS 12, 13, 26, 27, 28, 29 STEPS 15, 16, 23, 24 Socket Screws Fork Crank Handle Brake Assembly Socket Nut Hardware Fork ...
-
Invacare Force - page 49
SECTION 8—SERVICE PROCEDURES Part No 1114850 49 Recumbent Handcycle Series Replacing the Crank Arms - XLT Gold, XLT PRO and Top End Force NOTE: For this proced ure, ref e r to FIGURE 8.2 on page 50. NOTE: Right and left determined fr om as if seated on the handcycle. ...
-
Invacare Force - page 50
SECTION 8—SERVICE PROCEDURES Recumbent Handcycle Series 50 Part No 1114850 FIGURE 8.2 Replacing the Crank Arms - XLT Gold, XLT PRO and Top End Force Installing/Removing/Adjusting the Road Crown Compensator NOTE: For this proced ure, ref e r to FIGURE 8.3 on page 51. NOTE: The road crow n compens ...
-
Invacare Force - page 51
SECTION 8—SERVICE PROCEDURES Part No 1114850 51 Recumbent Handcycle Series Removing Road Crown Compensator 1. Remove the locknut securing the fork end of the road crown compensator to the fork bolt. 2. Remove the fork end of the road crown compensator ...
-
Invacare Force - page 52
SECTION 8—SERVICE PROCEDURES Recumbent Handcycle Series 52 Part No 1114850 Installing/Removing/Adjusting the Steering Dampener - For Top End XLT Gold and Force Only NOTE: For this proced ure, ref e r to FIGURE 8.4 on page 53. NOTE: The steering dampener is designed to stabilize t ...
-
Invacare Force - page 53
SECTION 8—SERVICE PROCEDURES Part No 1114850 53 Recumbent Handcycle Series FIGURE 8.4 Installing/Removing/Adjusting the Steerin g Dampener - For Top End XLT Gold and Force Only Installing Seven Speed Shifter Cable NOTE: For this proced ure, ref e r to FIGURE 8.5. NOTE: This procedur e applies to the ...
-
Invacare Force - page 54
SECTION 8—SERVICE PROCEDURES Recumbent Handcycle Series 54 Part No 1114850 Adjusting/Replacing Seven Speed Shifter Handcycles with seven speed shifters are equipped with SHIMANO hubs. If equipped with a SHIMANO hub, it MUST be serviced and adjusted by a ? ...
-
Invacare Force - page 55
SECTION 8—SERVICE PROCEDURES Part No 1114850 55 Recumbent Handcycle Series Adjusting Seven Speed Hub Chain WARNING Chain MUST be tight. If the chain is noisy, loos en. After chain is assembled, start in first gear and on straightaway. NOTE: For this proced ure, ref e r to FIGURE 8.7 on page 55. NOTE: Th ...
-
Invacare Force - page 56
SECTION 8—SERVICE PROCEDURES Recumbent Handcycle Series 56 Part No 1114850 5. Run the chain around the bottom of the wheel sprocket and back up tow ards the hand crank sprocket. 6. Attach the chain together using the master link (w/clip) provid ...
-
Invacare Force - page 57
SECTION 8—SERVICE PROCEDURES Part No 1114850 57 Recumbent Handcycle Series FIGURE 8.9 Adjusting Twenty-Seven Speed Cassette Chain Adjusting/Replacing the Parking Brake WARNING Before using your handcycl e, inspect the parking br ake for proper operation. NOTE: For this proced ure, ref e r to FIGURE 8.10. Adjusting the ...
-
Invacare Force - page 58
SECTION 8—SERVICE PROCEDURES Recumbent Handcycle Series 58 Part No 1114850 Parking Brake WARNING Replacement of the parking brake MUST be performed by a qualified technician. FIGURE 8.10 Adjusting/Replacing the Parking Brake Replacing Seat Upholstery WARNING Upholstery MUST be inspecte d be fore each use. Exposure to moisture (i.e. - wet ...
-
Invacare Force - page 59
SECTION 8—SERVICE PROCEDURES Part No 1114850 59 Recumbent Handcycle Series Replacing Back Upholstery WARNING Upholstery MUST be inspecte d be fore each use. Exposure to moisture (i.e. - wet weather or puddles) will da mage fastening straps/flaps /strips. DO NOT operate handcycle if upholstery is wet or dama ged, otherwise severe injury may oc ...
-
Invacare Force - page 60
SECTION 9—OPTIONS Recumbent Handcycle Series 60 Part No 1114850 SECTION 9—OPTIONS WARNING After any adjustments, repair or service and before use, make sure all attachi ng hardware is tightened securely - othe rwise injury or damage may result. Installing Rear Safety Light WARNING Operation of the hand cycle is subject to all traffic ru ...
-
Invacare Force - page 61
SECTION 9—OPTIONS Part No 1114850 61 Recumbent Handcycle Series Installing the Water Bottle NOTE: For this proced ure, ref e r to FIGURE 9.2. 1. Secure the wa t er bottle mounti ng tube to the seat frame using the hardw are provided. NOTE: Make sure that t ...
-
Invacare Force - page 62
SECTION 9—OPTIONS Recumbent Handcycle Series 62 Part No 1114850 Installing the Draft Bumper WARNING DO NOT use if draft bumper extends past rear wheels. If draft bumper extends past the rear wheels, contact dealer. NOTE: For this proced ure, ref e r to FIGURE 9.4. NOTE: The draft bumper can not ...
-
Invacare Force - page 63
SECTION 9—OPTIONS Part No 1114850 63 Recumbent Handcycle Series Installing Seat Positioning Strap NOTE: For this proced ure, ref e r to FIGURE 9.7. 1. Secure seat positioning strap to back canes using hardw are provided. FIGURE 9.7 Installing Seat Positioning Strap Installing the Compute ...
-
Invacare Force - page 64
SECTION 9—OPTIONS Recumbent Handcycle Series 64 Part No 1114850 Installing Hand Crank Handles NOTE: For this proced ure, ref e r to FIGURE 9.9. Horizontal Handles/Delrin Handles 1. Secure handle to hand crank with the screw (Detail “ A”). 2. Remove the screw to remov ...
-
Invacare Force - page 65
SECTION 9—OPTIONS Part No 1114850 65 Recumbent Handcycle Series 2. Firmly tighten the bolt. NOTE: Handle should spin fr eely with minimal play . If handle does not spin freely make sur e the spacer is firmly in place. If handle still ? ...
-
Invacare Force - page 66
SECTION 9—OPTIONS Recumbent Handcycle Series 66 Part No 1114850 Installing Gloves NOTE: For this proced ure, ref e r to FIGURE 9.12 on page 66. 1. W rap palm loop around horizontal handle (using top slot only) and secure to glove. 2. Run glove loop ...
-
Invacare Force - page 67
SECTION 9—OPTIONS Part No 1114850 67 Recumbent Handcycle Series Using the Travel Ready Option NOTE: For this proced ure, ref e r to FIGURE 9.14 on page 67. NOTE: This procedur e is for To p End XL T Pro, Gold, and To p End Force models only . The t ...
-
Invacare Force - page 68
SECTION 9—OPTIONS Recumbent Handcycle Series 68 Part No 1114850 Removing/Installing the Fork - Travel Ready XLT PRO Equipped with Road Crown Compensator NOTE: For this proced ure, ref e r to FIGURE 9.15 on page 69. Removing the Fork 1. Remove the nut securing the road crown compensat ...
-
Invacare Force - page 69
SECTION 9—OPTIONS Part No 1114850 69 Recumbent Handcycle Series FIGURE 9.15 Removing/Installing the Fork - Travel Ready XLT PRO Equipped with Road Crown Compensator Removing/Installing the Fork - XLT Gold, and Top End Force Equipped with Steering Dampener NOTE: For this proced ure, ref e r to FIGURE 9.16 on page ? ...
-
Invacare Force - page 70
SECTION 9—OPTIONS Recumbent Handcycle Series 70 Part No 1114850 3. Using the fork clamp and two socket screws, secure the bottom of the plate to the frame. 4. While inserting the lower threaded post into the tab, position the dampener c ...
-
Invacare Force - page 71
SECTION 9—OPTIONS Part No 1114850 71 Recumbent Handcycle Series Installing the Front Wheel NOTE: For ease of installation, secure handcycle frame approximately 6 inches from the ground or seek assistance. 1. Loop the chain ov er the front wheel sprocke ...
-
Invacare Force - page 72
SECTION 9—OPTIONS Recumbent Handcycle Series 72 Part No 1114850 8. Using two mounting bolts and locknuts, secure the rear wheel bar to the wheel tray . 9. Install the receiver onto the trailer hitch of the veh i cl e , according to the ve h ...
-
Invacare Force - page 73
SECTION 9—OPTIONS Part No 1114850 73 Recumbent Handcycle Series Adjusting the Handcycle Rack Wheel Tray Bracket NOTE: To properly secur e the handcycle, the whe el tray bracket should be adjusted to sit against the front wheel. 1. Remove the four mounting bolt ...
-
Invacare Force - page 74
SECTION 9—OPTIONS Recumbent Handcycle Series 74 Part No 1114850 Using the Alignment Gauge NOTE: For this proced ure, ref e r to FIGURE 9.19. NOTE: The alignment gauge is used to determine toe in/toe out. Refer to Determining/Adjusting To e In/T oe Out on ? ...
-
Invacare Force - page 75
LIMITED WARRANTY Part No 1114850 75 Recumbent Handcycle Series LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABL E TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975. This warranty is extended only to the original purchaser/user of our products. This warranty gives you specif ic legal rights and you m a ...
-
Invacare Force - page 76
Invacare Corporation www.invacare.com USA One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 Canada 570 Matheson Blvd E Unit 8 Mississauga Ontario L4Z 4G4 Canada 800-668-5324 All rights reserved. Trademarks are identified by the symbols ™ and ®. All trademarks are owned by or licensed to Invacare Corporation unless otherwise noted. Shiman ...
Haben Sie eine Frage bezüglich Invacare Force?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Invacare Force nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Invacare Force hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.