-
Chief Manufacturing 8805-000009 - page 1
Plasma Display Electric Pop-Up Lift (PUL) BEFORE YOU BEGIN • CAUTION: T o prevent damage to the PUL, which could affect or vo id the Factory warra nty , thoroughly study all instruc tions and illustrations before you begin to inst all or opera te the unit. Pay p articular att en- tion to the “Important Precautions” o n Page 1. • If you have ...
-
Chief Manufacturing 8805-000009 - page 2
Instruction Manual Plasma Display Electric Pop-Up Lift 1 I M P O RT AN T WAR N I N G S a n d C A U T I O N S ! W ARN IN G: A W ARN IN G alerts you to the possi bility of serious injury or dea th if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destructi on of equipment if you do not follow the cor ...
-
Chief Manufacturing 8805-000009 - page 3
2 Instruction Manual Plasma Display Electric Pop-Up Lift CONTENTS WEIGHT, SIZE, AND VERTICAL TRAVEL SPECIFICATIONS ............................. 3 DIMENSIONAL DRAWING ............................. 4 INSPECT AND TEST THE UNIT BEFORE INSTALLING ..................................... 5 Inspect The Unit .................................................. ...
-
Chief Manufacturing 8805-000009 - page 4
Instruction Manual Plasma Display Electric Pop-Up Lift 3 3. Determine the inside dimensions available in your furnitu re/ cabinet (see T able 2, “Adjust able Wid th ). T able 1: W eight, Size, and V ertical T ravel Model Lift Capacity Outside Dimensions Max. Equipment Size HxWxD V ertical T ravel PUL4228 230Lbs 104.3Kgs 33.75”x7.7” (857.3mmx1 ...
-
Chief Manufacturing 8805-000009 - page 5
4 Instruction Manual Plasma Display Electric Pop-Up Lift DIMENSIONAL DRA WING See T able 1 on page 3 for outside adjustable width, dimension “H” and dimension “W”. Front View Side V iew To p V i e w DIMENSION "H" ADJUST A BLE WIDTH 44.1 25 NIM - 56.1 2 5 MAX OUTSIDE 1 1 " MAX AD JUST ME NT 4" MIN 1.48 7.73 0 2.3 5.00 0 2 ...
-
Chief Manufacturing 8805-000009 - page 6
Instruction Manual Plasma Display Electric Pop-Up Lift 5 INSPECT AND TEST THE UNIT BEFORE INST ALLING Inspect The Unit 1. Carefully inspect the Plasma Display Electric Pop-Up Lift (PUL) for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with the i nstalla- tion until the carrier has reviewed the damag ...
-
Chief Manufacturing 8805-000009 - page 7
6 Instruction Manual Plasma Display Electric Pop-Up Lift PREP ARE THE FURNITURE/CABINET AND INST ALL THE LIFT Because of the wide variety of possibl e moun ting situations, Chief Manufacturing ca n only provide general guidelines for lift installation. S tud y the following informatio n carefully , and adapt it as necessary to fit your specific ins ...
-
Chief Manufacturing 8805-000009 - page 8
Instruction Manual Plasma Display Electric Pop-Up Lift 7 3. Make sure the finish piece measured in s tep 1 is smaller than the clearance distance measured in step 2 and note any cord management access holes that may be necessary . 4. Measure the thickness of the finish piece, add this thickness to the length of the five capscrews used to secure the ...
-
Chief Manufacturing 8805-000009 - page 9
8 Instruction Manual Plasma Display Electric Pop-Up Lift 4. W ith the extended position finish piece and the plasma- mounted, lower the unit to its fully retracted position. 5. Place the side pieces in position (do not attach). 6. Place the top piece in position (do not attach). 7. Measure the distance from the top surface of the top piece to the t ...
-
Chief Manufacturing 8805-000009 - page 10
Instruction Manual Plasma Display Electric Pop-Up Lift 9 Install the PUL into the Cabinet 1. Adjust motor/control box un it (see Fi gure 9). NOTE: The motor/control box unit is factory set to the nar- rowest horizontal position. a. Loosen the six 5/16”-18X5/8” hex head bolts on the fro nt of each half of the motor/c ontrol box and eight 1/4-20 ...
-
Chief Manufacturing 8805-000009 - page 11
10 Instruction Manual Plasma Display Electric Pop-Up Lift INST ALL THE DISPLA Y ON THE LIFT Attach Bracket s to the Display 1. Follow the instructions accompanying the PSB brackets designed for your display . Mount the Displa y 1. Remove 4 screws and slide back panel cover up and out (see Figure 11). 2. Make sure the latch on the mount is lowered t ...
-
Chief Manufacturing 8805-000009 - page 12
Instruction Manual Plasma Display Electric Pop-Up Lift 11 ADJUSTMENTS W ARNING: Be aware during the installation that this is a motorized device, and ther e are pinch points for people and for electrical wiring. Width Adjustment Adjust width as follows (see Figure 14): 1. Loosen the six 5/16”-18X5/8” hex head bolt s on the front of each half of ...
-
Chief Manufacturing 8805-000009 - page 13
12 Instruction Manual Plasma Display Electric Pop-Up Lift THIS P AGE INTENTIONALL Y BLANK ...
-
Chief Manufacturing 8805-000009 - page 14
Instruction Manual Plasma Display Electric Pop-Up Lift 13 WIRING EXAMPLES The information on the following pages cover the most common wiring opti ons: • Pushbutton • Extend and Retract T erminals to be Triggered By Separate Dry Contacts • Remote (RC-10) • 12 V olt out supply • 24 V olt out supply • T wo dry contact closures • V oltag ...
-
Chief Manufacturing 8805-000009 - page 15
14 Instruction Manual Plasma Display Electric Pop-Up Lift THIS P AGE INTENTIONALL Y BLANK ...
-
Chief Manufacturing 8805-000009 - page 16
Instruction Manual Plasma Display Electric Pop-Up Lift 15 Remote (RC-10) W ire for rem ote (RC-10) operatio n as fo llows (see Figure 21): 1. Install a jumper wire betw een termin als #6 and terminal #2 (see Figure 22). 2. Connect the white wire of the RC-10 controller unit to terminal #1 (see Figure 23). 3. Connect the red wire of the RC-10 contro ...
-
Chief Manufacturing 8805-000009 - page 17
16 Instruction Manual Plasma Display Electric Pop-Up Lift THIS P AGE INTENTIONALL Y BLANK ...
-
Chief Manufacturing 8805-000009 - page 18
Instruction Manual Plasma Display Electric Pop-Up Lift 17 12 V olt Out Supply This internal power supp ly can be used to power external devices &/or to initiate specif ic functions (see Pushbutton operation an d F igu re 25) . 1. Connect one lead to 12 VOL T GROUND (ter minal #9). 2. Connect one lead to 12 VOL TS OUT ( terminal #10). 24 V olt O ...
-
Chief Manufacturing 8805-000009 - page 19
18 Instruction Manual Plasma Display Electric Pop-Up Lift THIS P AGE INTE NTIONALL Y BLANK ...
-
Chief Manufacturing 8805-000009 - page 20
Instruction Manual Plasma Display Electric Pop-Up Lift 19 TROUBLESHOOTING If the lift is installed according to th ese instructions, it should operate trouble- free indefinitely . If you do encounter a pr oblem , and it isn’t covered by the troubleshooting suggestions below , call the T echnical Services Depar tment at Chief Manufacturing: 1-800- ...
-
Chief Manufacturing 8805-000009 - page 21
20 Instruction Manual Plasma Display Electric Pop-Up Lift TERMINAL FUNCTI ON DEFINITIONS TERMIN AL NUMBER FUN CTION DESCRIP TION WIR IN G OPTION S NOT ES 1 24 VOL T AC 24 volt A C output 2 24 VOL T AC COMMON 24 volt A C comm on This is an interna l power supply f or powering external d evices & Remote Contro llers. Chief Mfg. offers the RC -10 ...
-
Chief Manufacturing 8805-000009 - page 22
Instruction Manual Plasma Display Electric Pop-Up Lift 21 11 EXTEN D Ex tend s un it to prese t trav el l i m i t. C u s to m e r w ith in a pr es et m ax im um range m ay adj ust trav el lim i ts. If usi ng L atching Sw it ch, be sure t o d is en g ag e S w i tc h p rio r to in it ia tin g an y other funct i on. 12 RETRACT R etr ac ts u n it to pr ...
Haben Sie eine Frage bezüglich Chief Manufacturing 8805-000009?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Chief Manufacturing 8805-000009 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Chief Manufacturing 8805-000009 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.