-
Graco NAUTILUS PD101777B - page 1
© 2009 Graco PD101777B 1/09 US READ THIS MANUAL Do not install or use this child restraint until you read and understand the instructions in this manual. F AILURE T O PROPERL Y USE THIS CHILD RESTRAINT INCREASES THE RISK OF SERIOUS INJURY OR DEA TH IN A SUDDEN STOP OR CRASH. Child Restraint/Booster Seat Owner ’ s Manual ...
-
Graco NAUTILUS PD101777B - page 2
2 T able of Contents 1.0 W arnings to Parents and Other Users ........................ 4 2.0 Registration Information ......... 5 2.1 Register Y our Child Restraint 5 2.2 Recall Information .......... 5 2.3 If Y ou Need Help .......... 5 3 . 0 F e a t u r e s ................... 6 - 7 4.0 Assembling the Child Restraint 8-12 5 . 0 I m p o r t a n t ...
-
Graco NAUTILUS PD101777B - page 3
3 T able of Contents (cont.) 12.0 Harness Removal .........3 8 - 4 2 13.0 Using Y our Child Restraint WITHOUT B u i l t - i n H a r n e s s ...........4 3 - 4 5 14.0 Securing Child & Booster Seat in . . V ehicle .................... 4 6 15.0 Adjusting Head Support .....4 7 - 4 8 16.0 Removing Back Support ....4 9 - 5 1 17.0 Securing Child in V ...
-
Graco NAUTILUS PD101777B - page 4
4 1.0 W ar nings to P ar ents and Other User s Failure to properly use this child restraint increases the risk of serious injury or death in a sharp turn, sudden stop or crash. Y our child’s safety depends on you installing and using this child restraint correctly . Even if using this child restraint seems easy to fi gure out on your own, it is ...
-
Graco NAUTILUS PD101777B - page 5
5 2.0 R e gistr ation Inf or ma tion Model Number: Manufactured in: Purchase Date: 2.1 R e gister Y our Child R estr aint Please fi ll in the above information. The model number and manufactured in (date) can be found on a label underneath your child restraint. Fill out the prepaid registration postcard attached to the harness and mail it today . ...
-
Graco NAUTILUS PD101777B - page 6
6 3.0 F ea tur es Crotch strap Harness buckle Harness clip V ehicle belt guide Cupholder Harness adjuster lever (above strap) Adjustment strap Harness covers Harness slots Height adjust button Shoulder belt guide Recline handle Storage compartment (one on each side) Body support Head support Head support side wing buttons Recline foot Back support ...
-
Graco NAUTILUS PD101777B - page 7
7 LA TCH T ether storage bar Release buttons Harness slots (behind straps) LA TCH adjuster Harness straps T ether strap Red Rollers (behind straps) Strap guides (behind straps) LA TCH LA TCH storage bars (on each side of seat) Shoulder belt lock-off United States Federal Motor V ehicle Safety Standards have de fi ned a new system for installing ch ...
-
Graco NAUTILUS PD101777B - page 8
8 1. Lay child restraint flat on back. Grab seat pad fabric in sitting area to expose the gutters . MAKE SURE all hands, fingers and other objects are clear of the gutters. 2. MAKE sure the harness straps are securely attached within the “T”-shaped slots around the arms as shown . With your other hand, raise seat back so that both a ...
-
Graco NAUTILUS PD101777B - page 9
9 3. Arms should CLICK into the gutters. Seat assembly should appear as shown . CLICK! ...
-
Graco NAUTILUS PD101777B - page 10
10 DO NO T use WITHOU T Back Support after D ecember NE P AS utiliser SANS le dossier après dé cembr e NO lo use SIN el apoyo de la espalda después de diciembr e DO NO T use the Back Suppo rt after December NE P AS utiliser le do ssier après décembr e NO use el ap oyo de la espal da después de di ciembr e 2014 2017 4. Attach 4 elastic loo ...
-
Graco NAUTILUS PD101777B - page 11
11 6. Squeeze height adjust button and push head support into slots on the back support as shown. Head support will click into the back support. Y ou may need to unfasten the hook and loop attachment tape on both sides at the top of the back support to allow for easier access to the slots. Always use child restraint with head support instal ...
-
Graco NAUTILUS PD101777B - page 12
12 7. The assembly is now complete. ...
-
Graco NAUTILUS PD101777B - page 13
13 5.0 Impor tant Inf or mation • NEVER PLACE THIS CHILD RESTRAINT IN A VEHICLE SEA TING LOCA TION THA T HAS A FRONT AIR BAG. If an air bag in fl ates, it can hit the child and child restraint with great force and cause serious injury or death to your child. Refer to your vehicle owner ’s manual for information about side air bags and child re ...
-
Graco NAUTILUS PD101777B - page 14
14 • NEVER LEA VE A CHILD RESTRAINT UNSECURED IN YOUR VEHICLE. An unsecured child restraint can be thrown around and may injure occupants in a sharp turn, sudden stop or crash. Remove it or make sure that it is securely belted in the vehicle. If not using LA TCH and tether , make sure LA TCH and tether connectors are properly stored on back of se ...
-
Graco NAUTILUS PD101777B - page 15
15 F AILURE TO USE CHILD RESTRAINT IN A MANNER APPROPRIA TE FOR YOUR CHILD’S SIZE MA Y INCREASE THE RISK OF SERIOUS INJUR Y OR DEA TH. Instructions for the use of this child restraint differ greatly depending on the size of your child. Be sure you are using the child restraint in the correct mode and with the correct features for your child. 6.0 ...
-
Graco NAUTILUS PD101777B - page 16
16 6.2 WITHOUT Built-in Har ness Y our child must meet all requirements: • Weight: 30 to 100 lbs (mass between 13.6 and 45 kg) • Height: 38 to 57 inches (96 and 145 cm) in height • approximately 3-10 years of age • the shoulder belt MUST lie across child’s shoulder as shown and the lap portion of the belt is positionned low on the child? ...
-
Graco NAUTILUS PD101777B - page 17
17 6.3 WITHOUT Bac k Suppor t Y our child must meet all requirements: • weigh between 40 and 100 lbs. (mass between 18 and 45 kg), • and are between 40 and 57 inches (101 and 145 cm) in height, • approximately 4-10 years of age • the shoulder belt MUST lie across child’s shoulder as shown and the lap portion of the belt is positionned low ...
-
Graco NAUTILUS PD101777B - page 18
18 7.0 Choosing an A ppr opriate V ehic le Sea t Loca tion 7.1 V ehicle Sea t Location R equir ements Some seating positions in your vehicle may not be safe for this child restraint. Some vehicles do not have any seating positions that can be used safely with the child restraint. If you are not sure where to place the child restraint in your vehicl ...
-
Graco NAUTILUS PD101777B - page 19
19 7.2 V ehic le Seat Belt R equir ements 7.3 SAFE V ehic le Sea t Belt Systems MANY SEA T BEL T SYSTEMS ARE NOT SAFE TO USE WITH THE CHILD RESTRAINT . THE VEHICLE SEA T BEL T MUST BE DESIGNED TO HOLD THE CHILD RESTRAINT TIGHTL Y A T ALL TIMES. Pay careful attention to these systems; some of the seat belts that are not safe to use look very much li ...
-
Graco NAUTILUS PD101777B - page 20
20 7.4 F or Built-in Har ness Onl y • Lap Belts - Manually Adjusted When buckled, the belt is tightened manually by pulling on the excess belt. • Lap Belts with Automatic Locking Retractor (ALR) The automatic locking retractor will not permit the lap belt to lengthen once it is buckled. T ighten the belt by feeding the belt back into the retrac ...
-
Graco NAUTILUS PD101777B - page 21
21 7.5 W ith OR W ithout Built-in Har ness • Combination Lap/Shoulder Belt with Locking Latch Plate Once it is buckled, this type of belt has a latchplate that will not allow the lap portion of the belt to loosen. Belt is tightened by pulling hard on the shoulder portion of the vehicle belt while pushing down hard on the child restraint. • Comb ...
-
Graco NAUTILUS PD101777B - page 22
22 7.6 UNSAFE V ehic le Belt Systems • Lap Belts with Emergency Locking Retractor (ELR) This lap belt stays loose and can move until it locks in a crash or sudden stop. DO NOT USE ANY OF THE FOLLOWING SYSTEMS T O SECURE THE CHILD RESTRAINT . LA TCH can be used IN PLACE OF the following unsafe belt systems if your vehicle is equipped with LA TCH a ...
-
Graco NAUTILUS PD101777B - page 23
23 • Passive Restraint - Lap Belt with Motorized Shoulder Belt DO NOT use vehicle belts that are attached to the door in any way or that move along a track to automatically surround the passenger when the door is closed. • Lap Belts Forward of Seat Crease ...
-
Graco NAUTILUS PD101777B - page 24
24 8.0 LA T CH Newer vehicles have one or more seating positions with LA TCH anchorage systems. If vehicle is equipped with LA TCH , the vehicle lower anchor points may be visible at the vehicle seat crease. If not visible, they may be marked with this symbol . See your vehicle owner ’ s manual for exact locations, anchor identification, and requ ...
-
Graco NAUTILUS PD101777B - page 25
25 9.0 Using Child R estr aint WITH Built-in Har ness 1. Loosen the harness straps by lifting the harness adjuster lever at front of seat near the adjustment strap and pulling the straps toward you . 2. Open harness clip . F AILURE TO PROPERL Y ADJUST THE HARNESS STRAPS FOR YOUR CHILD INCREASES THE RISK OF SERIOUS INJUR Y OR DEA ...
-
Graco NAUTILUS PD101777B - page 26
26 3. Unbuckle harness straps . 4. Check the crotch strap: Choose the position that is closest to but not under your child. T o change crotch strap position, push crotch belt up through the bottom of the child restraint and grab it from the top to pull out . Reinsert crotch strap in the desired position. Make sure crotch strap is not tw ...
-
Graco NAUTILUS PD101777B - page 27
27 5. The harness straps must go into the slots even with or just above the shoulders . If straps are in proper slots go to page 31. 6 . T o adjust harness straps: a) T urn seat around, so you will have access to the rear of the seat. b) From the rear of the seat remove straps from metal junction plate . ...
-
Graco NAUTILUS PD101777B - page 28
28 7. Pull strap ends through slots at front of seat ¡ and reinsert them in the desired slots ¢ . Check that the straps are not twisted. MAKE SURE harness straps are inserted into the same slots on each side of the seat. Remove body support when not using harness in the lowest slot position. ¢ ¡ ...
-
Graco NAUTILUS PD101777B - page 29
29 8. Use plastic strap guides as a guide to feed the harness up over the red rollers. Make sure to feed straps OVER red rollers and plastic strap guides . Make sure that the tether strap does not interfere when changing the harness strap height positions. 9. If the straps are not fed OVER the red rollers, the assembly is incorrect and MUST be corr ...
-
Graco NAUTILUS PD101777B - page 30
30 11 . Check that the straps are inserted at the same level. Pull on harness to make sure it is s e cu re . REMEMBER to check the shoulder straps and crotch strap position as your child grows and move them to the next position when necessary . The harness straps must go in the slots even with or just above the shoulders. 13 13 ...
-
Graco NAUTILUS PD101777B - page 31
31 10.0 Securing the Child R estr aint in Y our V ehic le 10.1 Using Child R estr aint WITH Built-in Har ness Lower anchors must be stored when using vehicle belt. See Section 18.1, Storing LA TCH, page 57 . 1. Place the child restraint firmly against the back of a forward-facing vehicle seat. 2. Thread the seat belt through the belt slot openings: ...
-
Graco NAUTILUS PD101777B - page 32
32 4. Tighten vehicle seat belt Push down hard with your knee or free hand in the middle of the child restraint . Then pull and tighten the shoulder portion of the lap/shoulder belt. 5. While pulling the shoulder portion of the lap/shoulder belt, lay the shoulder belt inside the opened lock-off and snap the lock-of f over the shoulder belt ...
-
Graco NAUTILUS PD101777B - page 33
33 6. If a vehicle top tether anchor is available, secure the tether to hold seat in place. See Section 18.0 Using the T ether , page 56. When not using the tether , hook it on the tether storage bar on the rear of the seat, see page 57. 7. Safety Check for Secure Installation Perform this test every time you drive with your child. T wist and pull ...
-
Graco NAUTILUS PD101777B - page 34
34 10.3 W ith LA T CH Use vehicle belt (not LA TCH connectors) for installations with children weighing more than 48 pounds (21.7 kg). NOTE: Some vehicle manufacturers have lower maximum weight ratings for LA TCH anchors, so you must consult your vehicle owner ’s manual or call the vehicle manufacturer to confirm the limits on your vehicle’s LA ...
-
Graco NAUTILUS PD101777B - page 35
35 6. NEVER put two LA TCH connectors on one vehicle LA TCH anchor unless specifically allowed by the vehicle manufacturer . 7. All LA TCH seating positions have tether anchors. Secure the top of the seat using the tether strap. See Section 18.0 Using the T ether , page 56. 8. Safety Check for Secure Installation Perform this test every time yo ...
-
Graco NAUTILUS PD101777B - page 36
36 11.0 Securing Y our Child in the Child R estr aint • ADJUST THE HARNESS SYSTEM SNUGL Y EVER Y TIME you place your child in the child restraint. • Avoid bulky clothing. 1. Place child in child restraint with child’s back flat against back of car seat. 2. Place harness straps over child’s shoulders and insert tongues into buckle until they ...
-
Graco NAUTILUS PD101777B - page 37
37 3. Fasten harness clip . Position harness clip at middle of child’s chest, level with armpits. 4. T ighten the harness straps by pulling the adjustment strap on the front of the seat . 5. Make sure straps are flat and snug against child’ s shoulders and thighs. Y ou should not be able to pinch the harness straps. A snug strap sho ...
-
Graco NAUTILUS PD101777B - page 38
38 1. Remove harness straps. Open chest clip and harness buckle . 2. Face the rear of the seat and remove the belt straps from metal junction plate as shown . 3. Remove crotch strap by pushing the strap retainer on bottom of seat, up through slot. 12.0 Har ness R emo val ...
-
Graco NAUTILUS PD101777B - page 39
39 4. Grab the crotch strap buckle and pull it completely out . 5. Pull on the adjustment strap on the front of the seat to lock the metal junction plate into place. 6. Grab hold of the shoulder straps and pull them out of their respective slots on the seat pad. Remove body support and crotch pad. ...
-
Graco NAUTILUS PD101777B - page 40
40 7. On the rear of the seat, detach 2 lower seat pad elastic straps from hooks as shown in . 8. Also detach the elastic straps that are threaded through the vehicle belt guides on the sides of the seat as shown in . Repeat on other side. 9. Pull the seat pad out of the way to reveal the red buttons as shown in the seating area ¡ . Slide ...
-
Graco NAUTILUS PD101777B - page 41
41 10. Remove harness straps from arms as shown in ¢ . Store the body support, harness covers, crotch pad cover and harness straps in safe place for future use. 1 1. Move seat pad fabric out of the way then raise seat back so that both arms LOCK into the gutters . Y ou should hear a CLICK when the arms lock into the gutters. MAKE sure to keep the ...
-
Graco NAUTILUS PD101777B - page 42
42 12. T uck seat pad in between the gap of the back support and seat area of the booster seat to allow 2 elastic straps to show at the rear of the seat . 13. Attach 2 seat pad elastic straps onto the hooks on the rear of the child restraint as shown in . 14. Pull elastic strap on the seat pad through the vehicle belt guide on side of seat and atta ...
-
Graco NAUTILUS PD101777B - page 43
43 13.0 Using Y our Child R estr aint WITHOUT Built-in Har ness W ARNING: Use only the vehicle lap and shoulder belt system when restraining the child in the booster seat. LA TCH will not secure your child in the booster seat . V ehicle belts MUST lay flat against child and MUST not be twisted. NEVER use a vehicle lap-only belt across front ...
-
Graco NAUTILUS PD101777B - page 44
44 DO NOT use shoulder belt loose or positioned under arm . DO NOT place shoulder belt behind child’s back . Lap portion of lap/shoulder belt MUST be low and snug on hips, just touching thighs. DO NOT allow child to slide down in booster seat . If child will not keep vehicle belt properly positioned, DO NOT use this booster seat. ...
-
Graco NAUTILUS PD101777B - page 45
45 INCORRECT INCORRECT V ehicle seat headrest should not create a gap between vehicle seat and booster seat . The front of booster seat MUST NOT hang over front of vehicle seat . ...
-
Graco NAUTILUS PD101777B - page 46
46 1. Place booster seat firmly against the back of a forward-facing vehicle seat equipped with a lap/shoulder belt only . 2. Place child in car seat with child’s back flat against back of car seat. 3. Position lap/shoulder belt through shoulder belt guide not underneath shoulder belt guide . Belt should pass over vehicle belt guide . ...
-
Graco NAUTILUS PD101777B - page 47
47 15.0 Adjusting Head Suppor t When using with or without the built-in harness. BEFORE adjusting the head support height, have your child lean forward slightly . Squeeze the red adjustment handle on top of seat and pull back support up until it snaps into one of the 5 height positions. T o lower , squeeze red adjustment handle and push down. C ...
-
Graco NAUTILUS PD101777B - page 48
48 T o adjust head support side wings, push buttons on top of seat down and rotate wings to desired position. ...
-
Graco NAUTILUS PD101777B - page 49
49 T o use booster seat WITHOUT back support, remove harness straps if attached ( see section 12.0 Harness Removal, p.38-42 ) then continue with the following steps: 1. Detach 2 lower elastic straps from rear of seat as shown . 2. Detach elastic strap from the hooks on the seat pad as shown. Repeat on other side . 16.0 R emo ving Bac k Supp ...
-
Graco NAUTILUS PD101777B - page 50
50 3. Pull the seat pad out of the way to reveal red buttons as shown in . Slide the buttons to release the back support from the base and lower it into a flat position. When removing back support, you must support the back support when sliding the red buttons that disengage the back support from the base. Make sure all hands, fingers and o ...
-
Graco NAUTILUS PD101777B - page 51
51 5. Once back support is separated , store back support with all the harness straps, head support, body support and crotch pad cover in safe place. 6. Reattach the elastic straps at the back of the seat and through the vehicle belt guide on the sides of seat as shown. 7. Seat is ready to install. T o reattach back support if neede ...
-
Graco NAUTILUS PD101777B - page 52
52 17.0 Securing Child in V ehic le with Shoulder Belt P ositioning Clip The shoulder belt MUST lie across child’s shoulders in red zone as shown . If shoulder belt lies outside this zone, the shoulder belt positioning clip MUST be used. T o attach clip to booster seat: 1. Insert the loop end of strap through the slot on rear of seat exac ...
-
Graco NAUTILUS PD101777B - page 53
53 2. Pass the clip and the strap through the loop end as shown and pull strap up. 3. NOTE: Free end of strap should face front of seat. ...
-
Graco NAUTILUS PD101777B - page 54
54 Shoulder belt positioning clip 4. Slide the vehicle shoulder belt onto the clip as shown and pull free end of strap down to tighten clip against the child’s shoulder . The lap portion MUST pass through the vehicle belt guide and be positionned low on the hips. The belt MUST NOT be twisted. Shoulder belt positioning clip REAR VIEW OF CH ...
-
Graco NAUTILUS PD101777B - page 55
55 5. Lap portion of lap/shoulder belt MUST be low and snug on hips, just touching thighs. DO NOT allow child to slide down in booster seat . CORRECT ...
-
Graco NAUTILUS PD101777B - page 56
56 18.0 Using the T ether All LA TCH seating positions have tether anchors. Always use tether if a vehicle tether anchor is available, check your vehicle owner ’s manual for the tether anchor location(s). If your vehicle is not equipped with a tether anchor , it may be possible to install one. Contact your vehicle dealership for the proper anchor ...
-
Graco NAUTILUS PD101777B - page 57
57 Lower anchors 18.1 Storing Lo wer Anc hor s and T ether (LA T CH) 1. For ease of storing, extend LA TCH to its maximum length. 2. Locate the storage bars on back of child restraint. 3. Fasten ends of tether and lower anchors onto their respective storage bars as shown. 4. T ether and lower anchors storage should look like this when compl ...
-
Graco NAUTILUS PD101777B - page 58
58 This restraint is certified for use in Motor V ehicles. It is certified for use in Aircraft ONL Y when used with the built-in harness. When used as a booster WITHOUT the harness, this restraint is NOT CER TIFIED for aircraft use because aircraft seats do not have a shoulder belt. Important points to remember: 1. Airlines have some restrictions a ...
-
Graco NAUTILUS PD101777B - page 59
59 20.0 Accessories (on cer tain models ONL Y) Body Support Harness covers T o pre vent ejection in sudden stop or crash: • Always make sure shoulder straps are threaded through slots and properly positioned on shoulders. • Never allow body support to bunch or fold behind child. • Use body support with bottom harness slots only . • Make sur ...
-
Graco NAUTILUS PD101777B - page 60
60 Y our child restraint has 3 recline positions: adjust recline foot before installing child restraint. 1. T o recline seat, pull recline handle out and tilt seat back to extend foot as shown . 2. T o set seat to upright position, pull recline handle out and tilt seat foward to retract foot . 21.0 R ec line F oot ? ...
-
Graco NAUTILUS PD101777B - page 61
61 • Continuous use of child restraint may cause damage to vehicle seat. Use a child restraint mat, towel or thin blanket to protect upholstery . • Metal and plastic parts: clean with mild soap and cool water . No bleach or detergents. • Harness straps and LA TCH straps: spot clean or replace. Do not immerse the straps in water . Doing so may ...
-
Graco NAUTILUS PD101777B - page 62
62 Seat Cover: clean with a damp sponge using mild soap and cool water . If necessary , cover may be removed for cleaning. 1. Remove harness and crotch straps (see Section 12.0, Harness Removal, p.38). 2. Remove elastic loops from seat as indicated in and . 3. Machine wash cover in cold water on delicate cycle and drip-dry . DO NOT USE BLEA ...
-
Graco NAUTILUS PD101777B - page 63
63 24.0 Owner s Manual Stor a ge Y our Owner ’s Manual can be stored on the bottom of the seat inside the slot in the footrest as shown. ...
-
Graco NAUTILUS PD101777B - page 64
64 25.0 R eplacement Par ts and W ar r anty T o purchase parts or accessories or for warranty information in the United States, please contact us at the following: www .g r acobaby .com or 1-800-345-4109 ...
Haben Sie eine Frage bezüglich Graco NAUTILUS PD101777B?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Graco NAUTILUS PD101777B nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Graco NAUTILUS PD101777B hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.