Bedienungsanleitung Intel NetportExpress 10 PCLA2152B

22 Seiten 0.79 mb
Download

Zur Seite of 22

Summary
  • Intel NetportExpress 10 PCLA2152B - page 1

    Intel Express 10/100 Stackable Hub User Guide ...

  • Intel NetportExpress 10 PCLA2152B - page 2

    Copyright © 1997, Intel Corporation. All rights reserved. Intel Corporation, 5200 NE Elam Young Parkway, Hillsboro OR 97124-6497 Intel Corporation assumes no responsibility for errors or omissions in this manual. Nor does Intel make any commitment to update the information contained herein. * Other product and corporate names may be trademarks of ...

  • Intel NetportExpress 10 PCLA2152B - page 3

    1 Quick Start 1. Install the Express 10/100 Stackable Hub in a rack or on a shelf or table, plug it in, and turn the power on. 2. Connect either 100BASE-TX devices or 10BASE-T devices to the ports. 3. Check the LEDs for links. You’re done. Next steps (Optional) Continue to the next page if you want to connect multiple hubs. Rack: Use the four sma ...

  • Intel NetportExpress 10 PCLA2152B - page 4

    2 (Optional) Connecting multiple hubs Connecting hubs running at 100 Mbps to hubs running at 10 Mbps Use an Intel Cascade Cable to connect the hubs. Hubs running at 100 Mbps can talk to each other, and hubs running at 10 Mbps can talk to each other. However, hubs running at 100 Mbps can’t talk to hubs running at 10 Mbps without bridging equipment ...

  • Intel NetportExpress 10 PCLA2152B - page 5

    3 3 Over view This guide covers both the 12- and 24-port versions of the Intel Express 10/100 Stackable Hub. • Intel product code: EE110TX12 • Intel product code: EE110TX24 • 12 fixed TPE ports • 24 fixed TPE ports • Stack eight hubs (mixed 12- or 24-port) • Stack eight hubs (mixed 12- or 24-port) • Hub management through optional • ...

  • Intel NetportExpress 10 PCLA2152B - page 6

    4 Connection Guidelines Connecting 100BASE-TX devices • Use Category 5 twisted-pair Ethernet (CAT 5 TPE) cable. • Always limit the distance between devices connected with TPE cable to 100 meters (the IEEE specification requires this). • Use a crossover cable to connect the hub to a switch. Use a straight-through cable to connect the hub to a ...

  • Intel NetportExpress 10 PCLA2152B - page 7

    5 Example Configurations Mix ed 10 Mbps and 100 Mbps en vir onment A stack of Express 10/100 Stackable Hubs can contain hubs running at both 10 and 100 Mbps. However, the hubs running at 10 Mbps and the hubs running at 100 Mbps are on separate network segments. These two segments can’t communicate with each other unless you use another device to ...

  • Intel NetportExpress 10 PCLA2152B - page 8

    6 Bridging with the Express 10/100 Fast Ethernet Switch A switch with individual ports capable of operating at 10 or 100 Mbps can bridge 10 Mbps and 100 Mbps segments. No configuration of your network operating system is needed. Express 10/100 Fast Ethernet Switch Category 5 TPE (100m max.) Category 3, 4, or 5 TPE (100m max.) Port 8 Xmt Link Col ...

  • Intel NetportExpress 10 PCLA2152B - page 9

    7 Bridging with the Express 10/100 Downlink The Express 10/100 Downlink has two ports that operate at either 10 or 100 Mbps. Each port automatically senses the speed of the attached device. All you need to do is set the speed of the hubs. No configuration of your network operating system is needed. Intel Express  10/100 Downlink Category 5 TPE ( ...

  • Intel NetportExpress 10 PCLA2152B - page 10

    8 Extending the 100 Mbps network topology You can extend the network topology only by connecting hubs to a switch, bridge, or router. You can’t extend the topology by daisy- chaining hubs together. In the example below, the network diameter is extended to 400 meters by connecting the two hub stacks to an Intel Express 10/100 Fast Ethernet Switch. ...

  • Intel NetportExpress 10 PCLA2152B - page 11

    9 Extending the 10 Mbps network topology To extend the 10BASE-T network topology, you can attach hubs to a switch or daisy-chain the hubs using TPE cabling. If you attach a stack of hubs to a switch, each stack gets its own 10 Mbps of bandwidth. Attaching hubs to a switch The illustration below shows two stacks of Express 10/100 Stackable Hubs oper ...

  • Intel NetportExpress 10 PCLA2152B - page 12

    10 Understanding LEDs P or t LEDs The LEDs above a port provide information about the port’s configuration and status. Green LED (left side) Amber LED (right side) LED Status Meaning Green Solid Port has a link. Blinking Receive activity detected on port. Off No link detected. Amber Sol id Port is disabled by management (not applicable with ...

  • Intel NetportExpress 10 PCLA2152B - page 13

    11 Unit LEDs Unit LEDs indicate the status of a hub’s power supply, hub speed, collision occurrences in a hub or stack of hubs, and whether a hub is managed. 10BASE-T 100BASE-TX Collision Managed Status Power Change hub speed LED Status Meaning 10BASE-T O n Hub is operating at 10 Mbps. 100BASE-TX O n Hub is operating at 100 Mbps. Collision Blinki ...

  • Intel NetportExpress 10 PCLA2152B - page 14

    12 Ca b ling Requirements Incorrect cabling is often the cause of network problems. Read the next two pages if you’re unsure of your requirements. 100B ASE-TX requirements The 100BASE-TX Fast Ethernet specification requires you use CAT 5 unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cabling to operate at 100 Mbps (UTP and STP are c ...

  • Intel NetportExpress 10 PCLA2152B - page 15

    13 Straight-thr ough vs. c r osso ver cab les Ports on the hub are wired MDI-X (media dependent interface crossover) so you can use a straight-through cable when connecting to a workstation or server (network adapter cards are wired MDI). For direct connection to another MDI-X port (hub and switch ports), you must use a crossover cable. Determining ...

  • Intel NetportExpress 10 PCLA2152B - page 16

    14 T r oubleshooting No link (green LED is off). • Remove the cable and plug it in again. Wait up to six seconds for a link. • If you’re using the wrong type of cable, either straight-through or crossover, the green LED above the port will not come on. Use the other type of cable. • Make sure the device you’ve connected to a port is a 10B ...

  • Intel NetportExpress 10 PCLA2152B - page 17

    15 Frequentl y Asked Questions I have 10 Mbps and 100 Mbps hubs connected with an Intel Cascade Cable. Can they talk to each other? No. All hubs running at 100 Mbps are in one collision domain (or segment) and all hubs running at 10 Mbps are in a separate collision domain. See pages 5-7 for bridging options. Then why would I connect hubs running at ...

  • Intel NetportExpress 10 PCLA2152B - page 18

    16 Can I configure a full-duplex link between the hub and another device? Only to the optional Ethernet Module or Fiber Module. The external ports on the modules are switched ports and are capable of full duplex. The base ports of the hubs aren’t capable of full-duplex operation. Can I connect a 100BASE-T4 device to the hub? If the device is capa ...

  • Intel NetportExpress 10 PCLA2152B - page 19

    17 Limited Hardware Warranty Intel warrants to the original owner that the hardware product delivered in this package will be free from defects in material and workmanship for three (3) years following the latter of: (i) the date of purchase only if you register by returning the registration card as indicated thereon with proof of purchase; or (ii) ...

  • Intel NetportExpress 10 PCLA2152B - page 20

    18 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment ...

  • Intel NetportExpress 10 PCLA2152B - page 21

    19 WARNUNG Das System wurde für den Betrieb in einer normalen Büroumgebung entwickelt. Der entwickelt. Der Standort sollte: · sauber und staubfrei sein (Hausstaub ausgenommen); · gut gelüftet und keinen Heizquellen ausgesetzt sein (einschließlich direkter Sonneneinstrahlung); · keinen Erschütterungen ausgesetzt sein; · keine starken, von e ...

  • Intel NetportExpress 10 PCLA2152B - page 22

    20 World Wide Web & Internet FTP Intel BBS Access Intel’s World Wide Web home page Use Intel’s Bulletin Board. Dial in by or download information using modem at 8-N-1, and up to 14.4 Kbps. anonymous FTP. T r oubleshooting ✓ ✓ ✓ ✓ ✓ Software updates ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Installation notes ✓ ✓ ✓ ✓ ✓ Prod ...

Produzent Intel Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts Intel NetportExpress 10 PCLA2152B erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Intel
- Bedienungsanleitungen NetportExpress 10 PCLA2152B
- Produktkarten Intel
- Informationsbroschüren
- oder Energieetiketten Intel NetportExpress 10 PCLA2152B
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Intel NetportExpress 10 PCLA2152B.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Intel NetportExpress 10 PCLA2152B, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Intel NetportExpress 10 PCLA2152B. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Intel NetportExpress 10 PCLA2152B ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Intel NetportExpress 10 PCLA2152B, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Intel NetportExpress 10 PCLA2152B hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Intel NetportExpress 10 PCLA2152B verständlich ist.

Eine gänzliche Bedienungsanleitung von Intel sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Intel NetportExpress 10 PCLA2152B bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Intel NetportExpress 10 PCLA2152B befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Intel NetportExpress 10 PCLA2152B, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Intel NetportExpress 10 PCLA2152B - die uns die ersten Schritte während der Nutzung von Intel NetportExpress 10 PCLA2152B erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Intel NetportExpress 10 PCLA2152B hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Intel NetportExpress 10 PCLA2152B im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Intel NetportExpress 10 PCLA2152B?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Intel NetportExpress 10 PCLA2152B nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Intel NetportExpress 10 PCLA2152B hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)