Bedienungsanleitung Fender SRM 6302

16 Seiten 1.6 mb
Download

Zur Seite of 16

Summary
  • Fender SRM 6302 - page 1

    6302 / 8302 6302 / 8302 Owner's Manual for SRM 6302 / 8302 P/N 050804 REV A Fr om Fender Pr o Audio POWERED MIXERS ...

  • Fender SRM 6302 - page 2

    Fender Musical Instruments 7975 North Hayden Road, Scottsdale, Arizona 85258 U.S.A. Fender knows the importance of sound reinfor cement. From the simple box-top mixer to today's professional touring concert systems, the need to communicate, to make the connection between the performer and the audience is foremost in Fender's mind. Perhaps ...

  • Fender SRM 6302 - page 3

    3 150 W atts per Channel at 4 Ω Assignable Dual Power Amplifiers 9-Band Assignable Graphic Equalizer with 30mm Sliders 3-Band Equalizer per Input Channel +48V DC Phantom Power Individual Channel Effects Level Contr ol Both 1/4 inch Phone TRS and 3-Pin XLR Female Input Connectors Patch Points for Line Level Output and Power Amp Inputs and Outboar ...

  • Fender SRM 6302 - page 4

    4 A. EFFECTS - This knob controls the amount of signal its respective channel sends to the overall effects mix. When the knob is set at 0, the output is “dry”. B. HIGH - Adjusts the amount of high frequency boost or cut in the channel. When all the tone controls are set at 0 (straight up), the channel is “flat” with no frequencies cut or bo ...

  • Fender SRM 6302 - page 5

    A. EQ ASSIGN - This button switches the graphic equalizer between the main and the monitor bus. When this button is pressed, the EQ is assigned to the monitor bus. B. GRAPHIC EQUALIZER - This 9 band graphic equalizer consists of active band pass / band reject filters spaced at octave intervals. Moving the sliders up or down boosts or cuts the gain ...

  • Fender SRM 6302 - page 6

    O. TAPE IN - Unbalanced phono (RCA) input jacks designed for use with a tape player, CD player, etc. These jacks sum the stereo left and right input signal to a mono signal useful for playing prerecorded music. The tape/effects return to main and tape/effects return to monitor control the volume to these buses respectively. P. TAPE OUT - Unbalanced ...

  • Fender SRM 6302 - page 7

    7 Parallel or series are the two basic ways which multiple speakers can be connected to a single power amplifier. When speakers are connected in parallel, their combined impedance decreases. For speakers wired in series the opposite is true, their combined impedance increases. Also, when speakers are wired in series, higher impedance speakers in th ...

  • Fender SRM 6302 - page 8

    8 The SRM 6302 / 8302 has a variety of connectors on its input / output panels. Below is a chart listing the various types and their pin outs. Before using the SRM 6302 / 8302, please read and follow the steps listed below: 1. IMPORTANT Heed all safety warnings when operating the SRM 6302 / 8302. 2. Make sure the power switch is in the OFF position ...

  • Fender SRM 6302 - page 9

    9 Ground loops are one of the most common causes of hum and buzz in sound reinforcement systems and other audio products. A ground loop usually occurs if the separate pieces of equipment are plugged into different AC circuits. Also, if the audio wiring is placed too close to the power cords, hums or buzzes can bleed into the system. Still, improper ...

  • Fender SRM 6302 - page 10

    10 SIMPLE SRM SETUP WITH MONITORS 1. Connect a microphone to a Mic input jack and any keyboard or other instrument to a Line input jack. 2. Next, connect speaker cords from the PA 1 Out jacks to the main speakers and from the PA 2 Out jacks to the monitor speakers. 3. The level control in each channel strip adjusts the amount of signal sent to the ...

  • Fender SRM 6302 - page 11

    11 RUNNING AN EFFECTS PROCESSOR THRU YOUR SRM 6302 / 8302 1. Connect speakers, microphones and other equipment to the SRM 6302 / 8302 as before. 2. Next, connect a cord from the Effects Out/Footswitch jack to the input of the effects processing unit. Return the signal to the SRM 6302 / 8302 by connecting a cord from the output of the effects unit t ...

  • Fender SRM 6302 - page 12

    12 SRM WITH AN EXTERNAL MONITOR POWER AMP FOR MONITOR SPEAKERS 1. Connect a cord from the Mon Out jack to the monitor power amp and system. With an external monitor power amp, the SRM’s second power amp may be assigned to the main bus for additional power to the front of house speakers. When PA 2 is assigned to the main front of house enclosures, ...

  • Fender SRM 6302 - page 13

    13 SRM WITH AN EXTERNAL POWER AMP FOR FRONT OF HOUSE SPEAKERS 1. Connect a cord from the Main Out jack to an external power amp. Be sure one monitor enclosure is connected to a PA 1 Out jack and the other is connected to a PA 2 Out jack. (PA 1 power amp can now be assigned to monitor speakers by connecting a small, shielded jumper cable from the Mo ...

  • Fender SRM 6302 - page 14

    MIC INPUTS LINE LEVEL MONITOR EFFECTS TO MAIN BUS TO EFFECTS/ REVERB BUS TO MONIT OR BUS 3 21 TO PHANT OM BUS HIGH LOW MID CHANNEL EQ RETURN TO MONITOR RETURN TO MAIN Typical signal path for each channel MONITOR EFFECTS/REVERB MAIN PHANTOM EFFECTS IN L MONITOR EFFECTS/REVERB MAIN PHANTOM PHANTOM POWER SWITCH +48 VDC REVERB DELA Y LINE REVERB RETURN ...

  • Fender SRM 6302 - page 15

    15 SPECIFICA TIONS FOR THE SRM 6302 DESIGNATION TYPE PR 332 PART NUMBER 071-6321-000 (120 V) 071-6321-030 (240 V) Aust 071-6321-040 (230 V) UK 071-6321-060 (230 V) Euro POWER SPECIFICATIONS 120V version: 120V AC, 60 Hz, 900W 230V version: 230V AC, 50 Hz, 900W 240V version: 240V AC, 50 Hz, 900W PRE-AMPLIFIER SECTION MIC INPUT IMPEDANCE 1.8 k Ω LIN ...

  • Fender SRM 6302 - page 16

    A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORP. CORONA, CA 91720 USA SPECIFICA TIONS FOR THE SRM 8302 DESIGNATION TYPE PR 332 PART NUMBER 071-8321-000 (120 V) 071-8321-030 (240 V) Aust 071-8321-040 (230 V) UK 071-8321-060 (230 V) Euro POWER SPECIFICATIONS 120V version: 120V AC, 60 Hz, 900W 230V version: 230V AC, 50 Hz, 900W 240V version: 240V AC, 50 ...

Produzent Fender Kategorie Mixer

Dokumente, die wir vom Produzenten des Geräts Fender SRM 6302 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Fender
- Bedienungsanleitungen SRM 6302
- Produktkarten Fender
- Informationsbroschüren
- oder Energieetiketten Fender SRM 6302
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Fender SRM 6302.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Fender SRM 6302, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Fender SRM 6302. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Fender SRM 6302 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Fender SRM 6302, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Fender SRM 6302 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Fender SRM 6302 verständlich ist.

Eine gänzliche Bedienungsanleitung von Fender sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Fender SRM 6302 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Fender SRM 6302 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Fender SRM 6302, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Fender SRM 6302 - die uns die ersten Schritte während der Nutzung von Fender SRM 6302 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Fender SRM 6302 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Fender SRM 6302 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Fender SRM 6302?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Fender SRM 6302 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Fender SRM 6302 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (1)

Inaki

Quisiera manual en español de fender srm 6302