Bedienungsanleitung Linksys RV042

26 Seiten 0.83 mb
Download

Zur Seite of 26

Summary
  • Linksys RV042 - page 1

    LinkSys R V042 Router Inst allation Instructions Part 1 | Basic Configuration of Y our Broadband VPN Router Before you attempt to log into the web-base d Administration , please verify the following. 1. Your browser is configured properly (see below). 2. Disable any firewall or security software that may be running. 3. Confirm that you have a good ...

  • Linksys RV042 - page 2

    1.2 | Web Management To access the Router’s management interface, enter the Router IP address in your web browser http://192.168.1.1. To log on as an administrator, enter the sy stem password (the default User Name is admin and the default Password is admin ) and click the OK button. If you typ ed the password correctly, the left panel of the Web ...

  • Linksys RV042 - page 3

    1.3 | Setup Wizard Note: Select “Setup Wizard at the top center of the navigation panel in order to start you through the basic configuration s cre ens. 3 ...

  • Linksys RV042 - page 4

    1.4 | Basic Setup The first thing you need to complete is the Basic setup for the WA N parameters. Please click on the “Launch Now” button to start this process. 4 ...

  • Linksys RV042 - page 5

    1.5 This screen is for informational purposes only. Please select “Next>>” to proceed. 5 ...

  • Linksys RV042 - page 6

    1.6 Enter Host Name and Domain Na m e only if required by the ISP. Click on “Next>>” to proceed. 6 ...

  • Linksys RV042 - page 7

    1.7 Select the WAN connection type for t he primary co nnection to your ISP. 7 ...

  • Linksys RV042 - page 8

    1.8 Obtain IP Automatically (For WAN 1) If you selected this option it will allow the router to receive a Dynamic IP address from the IS P. If necessary you may place DNS addressing here th at will be used b y the workstations. Click “Next>>” to proceed. 8 ...

  • Linksys RV042 - page 9

    1.9 Static IP (For WAN 1) If you selected this option this will allow you to assig n a fixed (static) IP address. This address will be provided by your ISP. Enter the assigned IP address, Subnet Mask and Default Gateway IP address. Click “Next>>” in order to proceed. Please note that these addresses are only an example. Your addresses wil ...

  • Linksys RV042 - page 10

    1.10 DNS Server settings (For WAN 1) This will be only for Static IP entries. Th ese addresses will be pr ovi ded by your ISP. 10 ...

  • Linksys RV042 - page 11

    1.11 PPPoE (For WAN 1) If you selected this option you must enter the inform ation as provided by your ISP. Enter the PPPoE User Name and Password assigned by your Service Provider. Click “Next>> ” to proceed. 11 ...

  • Linksys RV042 - page 12

    1.12 WAN 2 Setup Although the router has the capabilities to use 2 Internet con nections we generally only use the 1 st configuration. You must progre ss through the se configurat ion screens in ord er to get to the “Save Settings” screen Click “Next” to co ntinue with th e configuration. 12 ...

  • Linksys RV042 - page 13

    1.13 Obtain IP Automatically (For WAN 2) 13 ...

  • Linksys RV042 - page 14

    1.14 Next select “Sav e Settings” in order to complete this step. 1.15 Click on “O K” in order to finish the setup for both WAN 1 & WAN 2 . 14 ...

  • Linksys RV042 - page 15

    1.16 | Advanced Setup – LAN Click on “Setup” on the menu at the top of the sc reen in order to validate the LAN setti ngs. Additionally you will be able to change the LAN IP address of the Router at this time. (Device IP Address & Subnet Ma sk) 15 ...

  • Linksys RV042 - page 16

    1.17 Setting the LAN IP address of the Rou ter. (Device IP Address & Subnet Ma sk) This is the local LAN IP address of the r outer. All networked computers will use this address to get to the Internet. Thi s is referred to as the “default Gateway”. Special Note: The addresses you need to use are the addresses provided by Galileo Internation ...

  • Linksys RV042 - page 17

    1.18 Click “SAVE SETTINGS” in order to save the configurati on information. 17 ...

  • Linksys RV042 - page 18

    Special Note : At this point you will be required to log in again to the router management system. You MUST insure that the IP address for your local machine has changed from the old address range (192.168.1.x) to the new address range that you input in the previous step 1.17! Click “OK ” to accept the change for the IP Addressing. The address ...

  • Linksys RV042 - page 19

    1.19 Select “DHCP” from the menu at the top of the screen. Th is will allow you to set the DHCP Scope for the workstations. Please insure that the Range Start & Rang e End are the beginning & ending of the range provided by Galileo International excl uding the address that w ill be used by the router. Start Range will usually be 1 more ...

  • Linksys RV042 - page 20

    Then at the command prompt type >IPCONFIG /ALL and record the Physical Address for the NIC card. (00-0D-60-26-8C-31) 20 ...

  • Linksys RV042 - page 21

    Click on “Add to List” in order add this entry into the table. Click on “Save Settings” in order to complete this step. Note: At this point of the configuration you should have internet connectivity. You can test your Internet access befo re proceeding to the next step. 21 ...

  • Linksys RV042 - page 22

    Part 2 | VPN T unnel Configuration of Y our Broadband VPN Router (IPSec) 2.0 General Information VPN settings are used to create virtu al p rivate tunnels to remote VPN gateway s . The tunnel technology supports data confidentiality, data orig in authentic ation and data integrity of network information, by utilizing encapsulation p rotoc ols, encr ...

  • Linksys RV042 - page 23

    The tunnel we need to add is fo r “Gateway to Gateway”. Click on “Add No w” to proceed. 23 ...

  • Linksys RV042 - page 24

    There are many settings that must be config ured to enable VPN for a dedicated tunnel: • Tunnel Name . The tunnel name is simp ly a name for this tunnel (i.e.VPNtoGalileo) • Local Group Setup: o Local Security Gateway Type: IP Only o IP Address: This will be pre-filled in from the WAN IP address as previously selected. o Local Security Group Ty ...

  • Linksys RV042 - page 25

    Click on “Save Settings” to complete this step . Click on “OK” to complete the VPN Tunnel definition. Note: You will need to repeat this step as necessary for each network that is required using a different name for each tunnel. As an example in the US we need to create 2 tunnels. VPNtoGalileo1 => 57.8.81.0 (Galileo Print Traffic) VPNtoG ...

  • Linksys RV042 - page 26

    In order to check the status of the VPN connection you can access the screen by selecting “VPN” from the menu at the top of the screen. This will display statu s as Connected when the tunnel is up. 26 ...

Produzent Linksys Kategorie Network Router

Dokumente, die wir vom Produzenten des Geräts Linksys RV042 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Linksys
- Bedienungsanleitungen RV042
- Produktkarten Linksys
- Informationsbroschüren
- oder Energieetiketten Linksys RV042
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Linksys RV042.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Linksys RV042, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Linksys RV042. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Linksys RV042 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Linksys RV042, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Linksys RV042 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Linksys RV042 verständlich ist.

Eine gänzliche Bedienungsanleitung von Linksys sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Linksys RV042 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Linksys RV042 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Linksys RV042, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Linksys RV042 - die uns die ersten Schritte während der Nutzung von Linksys RV042 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Linksys RV042 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Linksys RV042 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Linksys RV042?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Linksys RV042 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Linksys RV042 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)