Deutsch dropdown-ico

Bedienungsanleitung Icom IF4021T/S

32 Seiten 0.57 mb
Download

Zur Seite of 32

Summary
  • Icom IF4021T/S - page 1

    INSTRUCTION MANUAL This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. iF3023T/S iF3021T/S VHF TRANSCEIVERS The photo shows the 10-key version VHF transceiver . iF3026T/S iF4023T/S iF4021T/S UHF TRANSCEIVERS iF4026T/S ...

  • Icom IF4021T/S - page 2

    PRECAUTIONS i R CAUTION! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body , especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 2 to 4 in. (5 to 10 cm) away from the lips and the transceiver is vertical. R CAUTION! NEVER operate the transceiver ...

  • Icom IF4021T/S - page 3

    ii DO NOT modify the transceiver for any reason. KEEP the transceiver from the heavy rain, and Never immerse it in the water . The transceiver construction is water resistant , not waterproof. The use of non-Icom battery packs/chargers may impair transceiver performance and invalidate the warranty . For U.S.A. only CAUTION: Changes or modification ...

  • Icom IF4021T/S - page 4

    iii IMPORT ANT ........................................................................ i EXPLICIT DEFINITIONS ..................................................... i PRECAUTIONS ................................................................... i T ABLE OF CONTENTS ...................................................... iii 1 ACCESSORIES ......... ...

  • Icom IF4021T/S - page 5

    1 1 ACCESSORIES 1 ■ Supplied accessories NOTE: Some accessories are not supplied with depending on versions. ■ Accessory attachments D Flexible antenna Connect the supplied flexible anten- na to the antenna connector . CAUTION! • NEVER HOLD the antenna when carrying the transceiver . • T ransmitting without an antenna may damage the transc ...

  • Icom IF4021T/S - page 6

    2 1 ACCESSORIES ï Battery pack T o attach the battery pack: Slide the battery pack in the direction of the arrow ( q ), then lock it with the battery release button. • Slide the battery pack until the battery release button makes a ‘click’ sound. T o release the battery pack: Slide the battery release button in the direction of the arrow ( w ...

  • Icom IF4021T/S - page 7

    3 1 ACCESSORIES 1 ï Jack cover Attach the jack cover when the optional speaker-microphone or headset is not used. T o attach the jack cover: q Attach the jack cover to the [MIC/SP] jack. w T ighten the screws. CAUTION! • Attach the jack cover when the optional speaker-micro- phone or headset is not used. • Use the supplied screws only . T o de ...

  • Icom IF4021T/S - page 8

    4 2 P ANEL DESCRIPTION ■ Front panel q ANTENNA CONNECTOR Connects the supplied antenna. w DEALER-PROGRAMMABLE KEY [Emer] Desired function can be programmed by your dealer . (p. 7) e DEALER-PROGRAMMABLE KEY [Side1] Desired function can be programmed by your dealer . (p. 7) r PTT SWITCH [PTT] Push and hold to transmit; release to receive. t DEALER- ...

  • Icom IF4021T/S - page 9

    5 2 P ANEL DESCRIPTION 2 o EXTERNAL MICROPHONE/SPEAKER JACK Connect an optional speaker-microphone or headset. NOTE: Connect or disconnect the optional equipment after the transceiver is turned OFF . !0 VOLUME CONTROL [VOL] Rotate to t urn the power ON/OFF and adjusts the audio level. Jack cover NOTE: Attach the jack cover when the optional equipme ...

  • Icom IF4021T/S - page 10

    6 2 P ANEL DESCRIPTION ■ Function display q TRANSMIT INDICA TOR Appears while transmitting. w BUSY INDICA TOR Appears while the channel is busy . e SIGNAL STRENGTH INDICA T OR Indicates relative signal strength level. r LOW POWER INDICA TOR Appears when low output power is selected. • When the battery power decreases to a specified level, low p ...

  • Icom IF4021T/S - page 11

    7 2 P ANEL DESCRIPTION 2 ■ Programmable function keys The following functions can be assigned to [Emer] , [Side1] , [Side2] , [Side3] , [P0] , [P1] , [P2] and [P3] programmable function keys. Consult your Icom dealer or system operator for details con- cerning your transceivers programming. If the programmable function names are bracketed in the ...

  • Icom IF4021T/S - page 12

    8 2 P ANEL DESCRIPTION PRIO A/B KEYS ➥ Push to select Priority A or Priority B channel. ➥ Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 sec. to reassign the operating channel to Priority A or Priority B channel. MR-CH 1/2/3/4 KEYS Push to select memory channels 1 to 4 in the operating zone directly . MONI KEY Mute and release the ...

  • Icom IF4021T/S - page 13

    9 2 P ANEL DESCRIPTION 2 CALL KEYS Push to transmit a 2-tone. • Call transmission is necessary before you call another station depending on your signaling system. • [Call A] and/or [Call B] may be available when your system employs selective ‘Individual/Group’ calls. Ask your dealer which call is assigned to each key . EMERGENCY KEY Push an ...

  • Icom IF4021T/S - page 14

    ■ T urning power ON Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. (p. 16) q Rotate [VOL] to turn the power ON. w If the transceiver is programmed for a start up password, input the digit codes as directed by your dealer . • 10-keypad can be used for password input depe ...

  • Icom IF4021T/S - page 15

    11 3 BASIC OPERA TION 3 ■ Channel selection Several types of channel selections are available. Methods may differ according to your system set up. NON-ZONE TYPE: Push [CH Up] or [CH Down] to select the desired operating channel, in sequence; or , push one of [MR-CH 1] to [MR-CH 4] keys to select a channel directly . ZONE TYPE: Push [Zone], then p ...

  • Icom IF4021T/S - page 16

    12 3 BASIC OPERA TION ■ Receiving and transmitting NOTE: T ransmitting without an antenna may damage the transceiver . See page 1 for accessory attachments. Receiving: q Rotate [VOL] to turn the power ON. w Push [CH Up] or [CH Down] to select the conventional sys- tem channel, in sequence. e When receiving a call, adjust the audio output level to ...

  • Icom IF4021T/S - page 17

    13 3 BASIC OPERA TION 3 D TX code channel selection If the transceiver has [TX Code CH Select] assigned to it, the indication can be toggled between the operating channel number (or name) and TX code channel number (or name). When the TX code channel number (or name) is displayed, [CH Up] or [CH Down] selects the TX code channel. USING [TX CODE CH ...

  • Icom IF4021T/S - page 18

    14 3 BASIC OPERA TION ■ User set mode User set mode is accessed at power ON and allows you to set seldom-changed settings. In this case you can “cus - tomize” the transceiver operation to suit your preferences and operating style. Entering the user set mode: q While pushing and holding [Side2] and [Side3], rotate [VOL] to turn the power ON. T ...

  • Icom IF4021T/S - page 19

    15 3 BASIC OPERA TION 3 ■ Stun function When the specified ID, set as a killer ID, is received, the stun function is activated. When the killer ID is received, the transceiver switches to the password required condition. Entering of the password via the keypad is necessary to operate the transceiver again in this case. ■ Priority A channel sel ...

  • Icom IF4021T/S - page 20

    16 4 BA TTER Y CHARGING ■ Caution R DANGER! Use and charge only specified Icom battery packs with Icom radios or Icom charger . Only Icom battery packs are tested and approved for use and charge with Icom radios or Icom charger . Using third-party or counterfeit bat- tery packs or charger may cause smoke, fire, or cause the battery to burst. D D ...

  • Icom IF4021T/S - page 21

    17 4 BA TTER Y CHARGING 4 W ARNING! Immediately stop using the battery if it emits an abnormal odor , heats up, or is discolored or deformed. If any of these conditions occur , contact your Icom dealer or distrib - utor . W ARNING! Immediately wash, using clean water , any part of the body that comes into contact with fluid from inside the bat- te ...

  • Icom IF4021T/S - page 22

    18 4 BA TTER Y CHARGING ■ Optional battery chargers ï Rapid charging with the BC-160 The optional BC-160 provides rapid charging of optional Li- Ion battery packs. • An AC adapter (may be supplied with BC-160 depending on version) or the DC power cable (OPC-515L/CP-17L) is addi- tionally required. ï AD-106 installation q Install the AD-106 de ...

  • Icom IF4021T/S - page 23

    19 4 BA TTER Y CHARGING 4 ï Rapid charging with the BC-1 19N+AD-106 The optional BC-1 19N provides rapid charging of battery packs. The following items are additionally required. • AD-106 charger adapter • An AC adapter (may be supplied with BC-1 19N depending on version) or the DC power cable (OPC-515L/CP-17L). ï Rapid charging with the BC-1 ...

  • Icom IF4021T/S - page 24

    20 4 BA TTER Y CHARGING IMPORT ANT!: Battery charging caution Ensure the guide lobs on the battery pack are correctly aligned with the guide rails inside the charger adapter . (This illustration is described with the BC-160.) Guide rail Lobs ...

  • Icom IF4021T/S - page 25

    21 5 BA TTER Y CASE 4 5 ■ Optional battery case (BP-240) When using the optional battery case, install 6 × AAA (LR03) size alkaline batteries as illustrated at right. q Unhook the battery cover release hook ( q ), and open the cover in the direction of the arrow ( w ). (Fig.1) w Then, install 6 × AAA (LR03) size alkaline batteries. (Fig.2) • ...

  • Icom IF4021T/S - page 26

    22 6 OPTIONAL SWIVEL BEL T CLIP ■ MB-93 contents Qty . q Belt clip ……………………………………………………… 1 w Base clip …………………………………………………… 1 ■ Attaching q Release the battery pack if it is attached. (p. 2) w Slide the base clip in the direction of the arrow until the base clip i ...

  • Icom IF4021T/S - page 27

    23 6 OPTIONAL SWIVEL BEL T CLIP 6 ■ Detaching q T urn the transceiver upside down in the direction of the arrow and pull out from the belt clip. w Release the battery pack if it is attached. ( p. 2) e Pinch the clip ( q ), and slide the base clip in the direction of the arrow ( w ). CAUTION! HOLD THE TRANSCEIVER TIGHTL Y , WHEN HANGING OR DET ACH ...

  • Icom IF4021T/S - page 28

    24 7 OPTIONS D BA TTER Y P ACK D CHARGERS • BC-1 19N DESKTOP CHARGER + AD-106 CHARGER ADAPTER + BC-145 AC ADAPTER For rapid charging of battery packs. An AC adapter is sup- plied with the charger depending on versions. Charging time: approx. 2 hours when BP-231 is attached. • BC-121N MUL TI - CHARGER + AD-106 CHARGER ADAPTER (6 pcs.) + BC-157 A ...

  • Icom IF4021T/S - page 29

    25 7 OPTIONS 7 D OTHER OPTIONS • SP-13 EARPHONE Provides clear receive audio in noisy environment. • HM-158L/159L SPEAKER - MICROPHONE Combination speaker-microphone that provides convenient operation while hanging the transceiver from your belt. • HS-94/HS-95/HS-97 HEADSET + VS-1L VOX / PTT CASE HS-94: Ear-hook type HS-95: Neck-arm type HS-9 ...

  • Icom IF4021T/S - page 30

    26 8 SAFETY TRAINING INFORMA TION Y our Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended fo ...

  • Icom IF4021T/S - page 31

    27 8 SAFETY TRAINING INFORMA TION 8 Electromagnetic Interference/Compatibility During transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. T o avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensit ...

  • Icom IF4021T/S - page 32

    1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-6506D-1EX- w Printed in Japan © 2006 Icom Inc. ...

Produzent Icom Kategorie Marine Radio

Dokumente, die wir vom Produzenten des Geräts Icom IF4021T/S erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Icom
- Bedienungsanleitungen IF4021T/S
- Produktkarten Icom
- Informationsbroschüren
- oder Energieetiketten Icom IF4021T/S
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Icom IF4021T/S.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Icom IF4021T/S, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Icom IF4021T/S. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Icom IF4021T/S ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Icom IF4021T/S, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Icom IF4021T/S hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Icom IF4021T/S verständlich ist.

Eine gänzliche Bedienungsanleitung von Icom sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Icom IF4021T/S bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Icom IF4021T/S befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Icom IF4021T/S, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Icom IF4021T/S - die uns die ersten Schritte während der Nutzung von Icom IF4021T/S erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Icom IF4021T/S hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Icom IF4021T/S im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Icom IF4021T/S?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Icom IF4021T/S nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Icom IF4021T/S hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)