Bedienungsanleitung Pfaff 18

18 Seiten Betrifft nicht
Download

Zur Seite of 18

Summary
  • Pfaff 18 - page 1

    )OO9 NOLLDflJLSNI ...

  • Pfaff 18 - page 2

    Contents Foreword Your dream has -come true. You are now the proud owner of a Pfaff sewing machine which will enable you to master all ordinary sewing, embroidering and darning jobs that may come up in a home. Twis instruction book has been compiled in order to help you understand your sew ing machine and its operation and to acquaint you with the ...

  • Pfaff 18 - page 3

    Essential Parts of Machine 1 Take-up lever 2 Thread guide 3 Thread retainer (for bobbin winding) 4 Stitch width lever 5 Stitch width limiting button 6 Needle position lever 7 Spool pins (on back ofmachine arm) 8 Bobbin winder 9 Balance wheel 10 Stop motionknob 11 Driving belt 12 Motor (on back of machine) 13 Reverse feed control 14 Stitch length co ...

  • Pfaff 18 - page 4

    / ‘4’ Fig. 1 Fig. 2 Removing the Bobbin Case Turn the balance wheel toward you until the needle bar is at its highest point. Open the bed slide so that you can see the shuttle. Lift latch A (Fig. 1) with thumb and forefinger and take the bobbin case out of the machine. Release the latch so that the bobbin drops out. Disengaging the Sewing Mecha ...

  • Pfaff 18 - page 5

    Fig. S Raise the needle bar to its highest point. Lift latch D (Fig. 8) to keep the bobbin from dropping out of its case. Place the bobbin case on stud A, mak ing sure position finger C is opposite notch B. Release latch D and press against the bobbin case until it snaps into place with a click. Changing the Needle Turn the balance wheel toward you ...

  • Pfaff 18 - page 6

    Bring take-up lever 7 (Fig. 10) as high as it will go and place a spool of thread on one of the spool pins. Pass the thread through thread guides 1 and 2, down through thread guide 3, clock wise around and between tension discs 4, and into loop 5 of the thread check spring. Pull the thread up so that it will drop into thread guard 6. Then pass the ...

  • Pfaff 18 - page 7

    Regulating the Thread Tensions Fig. 13 III / / ( If the tensions ore not bolanced cor rectly, imperfect stitching will result, os illustrated in Fig. 12. — Upper tension too loose or lower tension too tight. II — Upper tension too tight or lower tension too loose. Ill — Both tensions balonced correctly. Upper Tension For ordinary sewing, the ...

  • Pfaff 18 - page 8

    Regulating the Stitch Width Set stitch width ever C (Fig. 17) to the desired stitch width (0 to 5). The num bers on the scale indicate the stitch width in millimeters. Stitch Width Limiting Button The stitch width can be limited by means of button A. To do this, pro ceed as follows: Set stitch width lever C on “2”, for instance, and hold it the ...

  • Pfaff 18 - page 9

    o Fg. 8 Removing the Needle Plate Lift both the needle and presser bars to their highest positions. Push the bed slide to the left. Lift the needle plate by its straight edge and tilt it out (Fig. 18). From time to time, clean the machine feed with a soft brush. As you replace the needle plate, make sure its far end slips under the head of the rear ...

  • Pfaff 18 - page 10

    Straight and Zigzag Sewing Button Sewing Raise the needle bar to its highest posi foot for the button sewing foot (Fig. 20). Check to see that the stop motion knob Drop the machine feed, flick the needle is tightened securely. position lever to left, and set the stitch tion and exchange the normal sewing Fjg. 21 a 21 b 21 width lever on “0”. St ...

  • Pfaff 18 - page 11

    Sewing Buttonholes with or without filler thread Attach the clear-view buttonhole foot (Fig. 23). Mark the position and length of the buttonhole on the material with tailor’s chalk. Set the stitch width lever on “2” and limit the stitch width, as instructed on page 13. Set the machine for satin stitching (turning the stitch length control usu ...

  • Pfaff 18 - page 12

    Embroidering and Darning Remove the sewing foot and drop the machine feed. Place the material into darning hoops (Fig. 25) and put it under the needle. Lower the presser bar lifter. Hold the darning hoops with both hands (Fig. 26) and move the work back and forth under the needle while the machine runs at high speed. Be sure to keep your fingers ou ...

  • Pfaff 18 - page 13

    Blindstich Hemming Flick the needle position lever to right. Turn the fobric wrong side up and fold bock its edge about 1/2 inch (Fig. 29 A). Then fold the material to the desired width of hem, os shown in Fig.29B,ond baste, Fold the hem down so that its bottom edge protrudes about /a inch (Fig. 29 C). Set both the stitch length and stitch width co ...

  • Pfaff 18 - page 14

    Machine Care B Cleaning the Shuttle Race Oiling All bearings of moving parts at the needle bar end and under the bedplate of the machine should be oiled occa sionally. In addition, there are a num ber of oilholes on the top cover of the machine. From time to time, remove the bobbin case and put a drop of oil into the shuttle race. Use only a high-g ...

  • Pfaff 18 - page 15

    Changing the Light Bulb Trouble Shooting Fig. 31 Remove the face cover. Push the bulb up into its socket, turn it left and pull it out. When inserting a new bulb (Fig. 31), be sure to slide the bulb pins into the bayonet socket slots. Press the bulb in and turn it right (see arrows in Fig. 31). The needle thread breaks Cause: 1. The needle is not t ...

  • Pfaff 18 - page 16

    The bobbin thread breaks The needle breaks Cause 1. The needle is bent. 2. The needle is not attached properly. 3. The material is too thick or heavy. 4. The material is pulled by the operator. 5. The needle is of inferior quality. Remedy: Insert a new needle. Attach it correctly. Use the correct needle for the material. Don’t pull on the fabric. ...

  • Pfaff 18 - page 17

    Irregular stitching 2. The needle is not threaded correctly or the bobbin is not wound properly. 3. The weight of the material and the size of the thread are not in accord. 4. The needle thread is not inserted between the tension discs correctly. Thread the needle or wind the bobbin correctly. Consult the Needle and Thread Chart on page 23 to selec ...

  • Pfaff 18 - page 18

    CPFAFC No. 20619 engl. (US) WI. 0169 Printed in Germany ...

Produzent Pfaff Kategorie Sewing Machine

Dokumente, die wir vom Produzenten des Geräts Pfaff 18 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Pfaff
- Bedienungsanleitungen 18
- Produktkarten Pfaff
- Informationsbroschüren
- oder Energieetiketten Pfaff 18
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Pfaff 18.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Pfaff 18, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Pfaff 18. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Pfaff 18 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Pfaff 18, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Pfaff 18 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Pfaff 18 verständlich ist.

Eine gänzliche Bedienungsanleitung von Pfaff sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Pfaff 18 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Pfaff 18 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Pfaff 18, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Pfaff 18 - die uns die ersten Schritte während der Nutzung von Pfaff 18 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Pfaff 18 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Pfaff 18 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Pfaff 18?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Pfaff 18 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Pfaff 18 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)