Deutsch dropdown-ico

Bedienungsanleitung SMC Networks SMC7908VoWBRA2

151 Seiten 3 mb
Download

Zur Seite of 151

Summary
  • SMC Networks SMC7908VoWBRA2 - page 1

    USER GUIDE SMC7908V oWBRA2 Barricade™ V oIP Wir eless 4 -port V oIP ADSL2 / 2 + Modem Rout er ...

  • SMC Networks SMC7908VoWBRA2 - page 2

    ...

  • SMC Networks SMC7908VoWBRA2 - page 3

    20 Mason Irvine, CA 92618 Phone: (949) 679 -8000 W ir eless 4-port V oIP ADSL2/2+ Modem Router From SMC’ s line of award-winning connectivity solutions April 2007 R01 F/W 0.3 (SIP) ...

  • SMC Networks SMC7908VoWBRA2 - page 4

    Infor mation furnishe d is believed to be accurate and reliable. However, no responsibil ity is assumed by o ur company for it s use, nor for any inf ringemen ts of patents or ot her rights of th ird partie s which may result from its us e. No l icense is granted b y implicatio n or otherwis e under any pa tent or paten t rights of our company . W ...

  • SMC Networks SMC7908VoWBRA2 - page 5

    i L IMITED W ARRANTY Limited W ar ranty Statement: SMC Netw orks , Inc. (“SMC”) warrants its products to be free from defects in workma nship and materials , under normal use and ser vice, for the applicable warranty ter m. All SMC products car r y a standard 90-day limited warranty from the date of purchase from SMC or its Authoriz ed Reseller ...

  • SMC Networks SMC7908VoWBRA2 - page 6

    L IMITED W AR RANTY ii WARRANTIES EX CLUSIVE: IF AN SMC PR ODUCT DOES NOT OPERATE AS W ARRANTED ABOVE, CUSTOMER’S SOLE REMED Y SHALL BE REP AIR OR REPLA CEMENT OF THE PRODUCT IN Q UESTION , A T SMC’S OPTION . THE FOREGOING W ARRANTIES AND REMEDI ES ARE EXCL USIVE AND ARE IN LIEU OF ALL OTHER W ARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED , EITHE ...

  • SMC Networks SMC7908VoWBRA2 - page 7

    iii C OMPLIANCES EC Confor mance Declaration SMC contact for these pr oducts in Europe is: SMC Networks Europe, Edificio Conata II, Calle Fructuós Gelabe rt 6-8, 2o, 4a, 08970 - Sant Joan Despí, Barcelona, Spain. Marking by the above symbol indicates complian ce with the Essential Requirements of the R&TTE Directive of the European Union (199 ...

  • SMC Networks SMC7908VoWBRA2 - page 8

    C OMPLIANCES iv ...

  • SMC Networks SMC7908VoWBRA2 - page 9

    v T ABLE OF C ONTENTS 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 About the B arricade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 VoIP (Voice over IP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features and Benefits . . . . ...

  • SMC Networks SMC7908VoWBRA2 - page 10

    T ABLE OF C ONTENTS vi 4 Configuring the Voice ADSL Router . . . . . . . . . . . . . . 4-1 Navigating the M anagement Inter face . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Making Configuration C hanges . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • SMC Networks SMC7908VoWBRA2 - page 11

    T ABLE OF C ONTENTS vii A Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 B Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Ethernet Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Specifications . . . . . . . . . . . . . . . . . ...

  • SMC Networks SMC7908VoWBRA2 - page 12

    T ABLE OF C ONTENTS viii ...

  • SMC Networks SMC7908VoWBRA2 - page 13

    1-1 C HAPTER 1 I NTRODUCTION Congratulations on your pu rchase of the Barricade TM g V oice ADSL Router , her eafter refer red to as t he “Bar ricade”. W e are proud to provide you with a po werful yet simple comm unication device for connecting y our local area network (LAN) to the Inter net. F or those who want to surf the Inter net in the mo ...

  • SMC Networks SMC7908VoWBRA2 - page 14

    I NTR ODUCTION 1-2 encoding and then compression of the signal into Internet Protocol (IP) pack ets. The V oIP Rout er is equippe d with a digital si gnal processor (DSP), which segments the voice s ignal into frames and stores them in voi ce pac kets . These pack ets are encoded usin g the industry standard CODECs , G .711, G .723.3 and G .729. Fe ...

  • SMC Networks SMC7908VoWBRA2 - page 15

    A PPLICATIONS 1-3 Applications Many advanced netw orki ng features are provid ed by the Barricade: • Wireless and Wired LAN The Bar ricade provides connectiv ity to 10/100 Mbps devices , and wireless IEEE 802.11b/g compatible de vices , making it easy to create a network in small offices or homes. • Internet Access This device suppor ts Interne ...

  • SMC Networks SMC7908VoWBRA2 - page 16

    I NTR ODUCTION 1-4 • DMZ Host Support Allows a netw orked computer to be fully exposed to the Inter net. This function is used when NAT and firewa ll security prevent an Internet application from functioning correctly . • Security The Bar ricade suppor ts security featur es that deny Internet access to specified users, or filter all reques ts f ...

  • SMC Networks SMC7908VoWBRA2 - page 17

    2-1 C HAPTER 2 I NSTALLATION Before installing the Bar ricade TM g V oice ADSL Router, v erify that you hav e all the items listed unde r the Pac k age Contents list. If any of the items are missing or damaged, contact your lo cal distributor . Also be sure that you ha ve all the necessar y cabling be fore installing the Bar ricade. After installin ...

  • SMC Networks SMC7908VoWBRA2 - page 18

    I NSTALLATION 2-2 System Requirements T o install and connect to the Barricade, you must ha ve: • An ADSL line installed by your ISP. • An ADSL splitter (at least one). • A computer wi th a CD-ROM drive • Windows 2000 or late r, or Mac OS 9.x. • An up to date web browser: Inte rnet Explorer 6. 0 or later, or Mozilla 1.7 /Firefox 1.0 or la ...

  • SMC Networks SMC7908VoWBRA2 - page 19

    H ARDWARE D ESCRIPTION 2-3 Hardware Description The Bar ricade contains an integ rat ed ADSL2+ modem and connects to the Internet or to a remote site usin g its W AN por t. This device can be connected directly to your PC or to a local area network us ing any of the four F ast Ethernet LAN por ts. Access speed to the Internet depends on your ser vi ...

  • SMC Networks SMC7908VoWBRA2 - page 20

    I NSTALLATION 2-4 SMC7908V oWBRA2 contains the following ports on the rear panel: Figure 2-1. SMC7908VoWBRA2 Rear Panel Item Description ADSL Port Connect your ADSL l ine to this port. LAN Ports Fast Ethernet ports (RJ-45). Connect devi ces on your local area network to these ports (i.e., a PC, hub, or switch). Reset Button Use this button to reset ...

  • SMC Networks SMC7908VoWBRA2 - page 21

    H ARDWARE D ESCRIPTION 2-5 LED Indicators The power and port LED indicators on the front panel are illustrated in the following figure and table. Figure 2-2. SMC7908VoWBRA2 Front Panel LED Status Description Power On The Barricade is receiv ing power. Normal operation. Off Power off or fai lure. ADSL Sync On ADSL connectio n is functioning correctl ...

  • SMC Networks SMC7908VoWBRA2 - page 22

    I NSTALLATION 2-6 ISP Settings Please collect the following inform ation from y our ISP before setting up the Barricade: • ISP account user name and password • VoIP setting deta ils • Protocol, encapsulation and VPI/VCI circuit numbers •D N S s e r v e r a d d r e s s • IP address, subnet mask and defaul t gateway (for fixed IP users only ...

  • SMC Networks SMC7908VoWBRA2 - page 23

    C ONNECT THE S YSTEM 2-7 Connect the System The Bar ricade can be posit ioned at any conv enient location in your office or home. It can also be w all-mount ed. No special wiring or cooling requirements are neede d. Y ou should, howev er, comply with the following guidelines: • Keep the Barricade away from any heating devices. • Do not place th ...

  • SMC Networks SMC7908VoWBRA2 - page 24

    I NSTALLATION 2-8 Warning: Do not plug a phone jack connect or into an RJ-45 port. This may damage the Barricade. Note: Use 100-ohm shielded or unshielded twisted-pair cable with RJ-45 connectors for all Ethernet por ts . Categ or y 5 cable is recommended . Make sure each twis ted-pair cable length does not exceed 100 meters (3 28 feet). Connect th ...

  • SMC Networks SMC7908VoWBRA2 - page 25

    C ONNECT THE S YSTEM 2-9 Connection Illustration The connection diag ram shows how to connect the Barricade.For SMC7908V oWBRA2, please refer to the following diagram. Figure 2-3. SMC7908VoWBRA2 Installation Diagram ...

  • SMC Networks SMC7908VoWBRA2 - page 26

    I NSTALLATION 2-10 ...

  • SMC Networks SMC7908VoWBRA2 - page 27

    3-1 C HAPTER 3 C ONFIGURING C LIENT PC After completing hardware setup b y connecting all your network devices , you need to configure your comput er to connect to the Barricade. See: “Windows 2000” on page 3-3 “Windows XP” on page 3-6 or “Configuring Y our Macintosh Computer” on page 3-8 depending on your operating system. ...

  • SMC Networks SMC7908VoWBRA2 - page 28

    C ONFIGURING C LIENT PC 3-2 TCP/IP Configuration T o access the Internet through the Barricade, yo u must config ure the network settings of the computers on y our LAN to use the sa me IP subnet as the Barricade. The default IP se ttings for the Barricade are: IP Address: 192.168.2.1 Subnet Mask: 255.255.255.0 Note: These setti ngs can be cha nged ...

  • SMC Networks SMC7908VoWBRA2 - page 29

    W INDOWS 2000 3-3 Windows 2000 1. On the Windows desktop , click Star t/Settings/Network and Dial-Up Connections . 2. Click the icon that corresponds to the connection to your Bar ricade. 3. The connection status screen will open. Click Proper ties . 4. Double-click Inter net Protocol (TCP/IP) . 5. If Obtain an IP address automatically and Obtain D ...

  • SMC Networks SMC7908VoWBRA2 - page 30

    C ONFIGURING C LIENT PC 3-4 Disable HTTP Proxy Y ou need to verify that the “ HTTP Pr o xy” feature of your w eb browser is disabled. This is so that your br owser can view the Ba rricade’ s HTML configuration pages. See page 3-6 for details . Obtain IP Settings from Your Barricade Now that y ou hav e configured y our computer to connect to y ...

  • SMC Networks SMC7908VoWBRA2 - page 31

    W INDOWS 2000 3-5 3. T ype ipconfig /renew and press the ENTER ke y . V er ify tha t you r IP address is now 192.168.2.xxx , your subnet mask is 255.255.255.0 and you r default g atew ay is 19 2.168. 2.1 . These values confir m that yo ur Barricade is functioning . 4. T ype exit and press the ENTER ke y to close the Command Prompt window . Y our co ...

  • SMC Networks SMC7908VoWBRA2 - page 32

    C ONFIGURING C LIENT PC 3-6 Windows XP 1. On the Windows desktop , click Star t/Control Panel . 2. In the Control P anel window , click Network and Inter net Connections . 3. The Network Connections wind ow will open. Double-click the connection for this device. 4. On the connection status screen, clic k Proper ties . 5. Double-click Inter net Prot ...

  • SMC Networks SMC7908VoWBRA2 - page 33

    W INDOWS XP 3-7 Obtain IP Settings from Your Barricade Now that y ou hav e configured your computer to connect to your Bar ricade, it needs to obtain new network settings . By releasing old DHCP IP settings and renewing them with se tti ngs from your Barricade, you can verify that y ou have configured your computer correctly . 1. On the Windows des ...

  • SMC Networks SMC7908VoWBRA2 - page 34

    C ONFIGURING C LIENT PC 3-8 Configuring Your Macintosh Computer Y ou may find that the instr uctions here do not exactly matc h your operating system. This is because thes e steps and screenshots were created using Mac OS 10.2. Mac OS 7.x and abov e are similar, but may not be identical to Mac OS 10.2. F ollow these instr uctions: 1. Pull down the ...

  • SMC Networks SMC7908VoWBRA2 - page 35

    C ONFIGURING Y OUR M ACINTOSH C OMPUTER 3-9 3. If Using DHCP Ser ver is already s elected in the Configure field , your computer is alread y configured for DHCP . If not, select this option. 4. Y our new settings are shown on the TCP/IP tab. V erify that your IP address is now 192.168.2.xxx , your subnet mask is 255.255.255.0 and your def a ult gat ...

  • SMC Networks SMC7908VoWBRA2 - page 36

    C ONFIGURING C LIENT PC 3-10 3. Uncheck all check box es and click OK . ...

  • SMC Networks SMC7908VoWBRA2 - page 37

    4-1 C HAPTER 4 C ONFIGURING THE V OICE ADSL R OUTER After you ha ve configured TCP/IP on a client computer , you can configure the Barricade using your web brows er . T o access the Barricade’ s management interfa ce, ent er the default IP address of the Barricade in y our web bro wser: http:// 192.168.2.1 . Enter the default passw ord: smcadmin ...

  • SMC Networks SMC7908VoWBRA2 - page 38

    C ONFIGURING THE V OICE ADSL R OUTER 4-2 Navigating the Management Interface The first screen of the web manag ement is Countr y Selection. Y ou need to select you r country before accessing the management interface. Click OK to confir m your selection. Click Apply to contin ue. ...

  • SMC Networks SMC7908VoWBRA2 - page 39

    N AVIGATING THE M ANAGEMENT I NTERFACE 4-3 The Bar ricade’ s manage ment interface consists of a Setup Wizard and an Advanced Setup section. Setup Wizard: Use the Setup Wizard if y ou want to quic kly set up the Bar ricade. Go to “SETUP WIZARD” on page 4-4 . Advanced Setup: Advanced Setup supports mo re advanced functions like VoIP, Firewall, ...

  • SMC Networks SMC7908VoWBRA2 - page 40

    C ONFIGURING THE V OICE ADSL R OUTER 4-4 SETUP WIZARD Channel and SSID Click on SETUP W IZARD and NEXT , then you will see the Channel and SSID screen. Click NEXT to contin ue. Parameter Description SSID Service Set ID. The SSID m ust be the same on the Barricade and all of its wireless c lients. SSID Broadcast Enabl e or disable the broadcas ting ...

  • SMC Networks SMC7908VoWBRA2 - page 41

    S ETUP W IZARD 4-5 ADSL Setting Select your Country and Inter net Ser vic e Provider . This will automatically configure the Barricade with the co r rect Protocol, Encapsulation and VPI/V CI settings for your ISP . If your Cou ntr y or Inte rnet Ser vice Provider is not listed in this screen, you will need to man ually enter settings. Go to “P ar ...

  • SMC Networks SMC7908VoWBRA2 - page 42

    C ONFIGURING THE V OICE ADSL R OUTER 4-6 VoIP Setting Configure you r V oIP accoun t settings on this screen. ...

  • SMC Networks SMC7908VoWBRA2 - page 43

    S ETUP W IZARD 4-7 Click NEXT to contin ue. Parameter Description Telephony Tone Country Select your Country. This will automatically configure the Barricade with the co rrect telephon y tone set for the selected c ountry. VoIP Provider Select your VoIP provider form the VoIP Provider drop-down men u. This automatica lly configures the SIP D omain, ...

  • SMC Networks SMC7908VoWBRA2 - page 44

    C ONFIGURING THE V OICE ADSL R OUTER 4-8 Confirm The Confir m screen shows a summary of the configuration parameters . Check ADSL operation mode (W AN), Network La yer Parameters (W AN), ISP parameters and V oIP settings ar e corre ct. ...

  • SMC Networks SMC7908VoWBRA2 - page 45

    S ETUP W IZARD 4-9 Parameter Description Wireless Parameters SSID The SSID must be the sam e on the Barricade and all of its wireless clients. SSID Broadcast The status of enabli ng or disabling the broadcasting of the SSID. Wireless Mode This device supports bo th 11g and 11b wireless networ ks. Channel This channel mus t be the same on the Barric ...

  • SMC Networks SMC7908VoWBRA2 - page 46

    C ONFIGURING THE V OICE ADSL R OUTER 4-10 If the parameters are cor rect, click FINISH to sav e these settings . Y our Bar ricade is now set up . Go to “T roubleshooting” if you cannot make a connection to the Internet. Parameter Setting - Coun try or ISP Not Listed If your Country or Internet Ser vice Provider is not lis ted, select Others . T ...

  • SMC Networks SMC7908VoWBRA2 - page 47

    S ETUP W IZARD 4-11 PPPoE Click NEXT to continue to the “Conf ir m” settings screen. Go to “Confir m” on page 4-8 in the ma nual for details about the settings . Parameter Description VPI/VCI Enter the Virtual Path Identifier (VPI) an d Virtual Circuit Identifier (VCI) suppl ied by your ISP. Encapsulatio n Select the enca psulation used by ...

  • SMC Networks SMC7908VoWBRA2 - page 48

    C ONFIGURING THE V OICE ADSL R OUTER 4-12 PPPoA Click NEXT to continue to the “Conf ir m” settings page. Go to “Confir m” on page 4-8 in the ma nual for details about the settings . Parameter Description VPI/VCI Enter the Virtual Path Identifier (VPI) an d Virtual Circuit Identifier (VCI) suppl ied by your ISP. Encapsulatio n Select the enc ...

  • SMC Networks SMC7908VoWBRA2 - page 49

    S ETUP W IZARD 4-13 1483 Bridging (DHCP) Click NEXT to continue to the “Conf ir m” settings page. Go to “Confir m” on page 4-8 in the manual for details about the setting . Parameter Description DNS Server Enter the DNS Ser ver IP address provided by your ISP . If your ISP has not provided you with a DNS address , leav e this field blank. T ...

  • SMC Networks SMC7908VoWBRA2 - page 50

    C ONFIGURING THE V OICE ADSL R OUTER 4-14 1483 Bridging (Static) Click NEXT to continue to the “Conf ir m” settings page. Go to “Confir m” on page 4-8 in the ma nual for details about the settings . Parameter Description IP Address Enter your ISP su pplied static IP address here Subnet Mask Enter the subnet ma sk address provided by your IS ...

  • SMC Networks SMC7908VoWBRA2 - page 51

    S ETUP W IZARD 4-15 1483 Routing Click NEXT to continue to the “Conf ir m” settings page. Go to “Confir m” on page 4-8 in the ma nual for details about the settings . Parameter Description IP Address Enter the IP addr ess provided by your ISP. Subnet Mask Enter the subnet mask address provided b y your ISP. Default Gateway Enter the gateway ...

  • SMC Networks SMC7908VoWBRA2 - page 52

    C ONFIGURING THE V OICE ADSL R OUTER 4-16 Bridging Enter the Bridging settings pr ovided b y your ISP . Click NEXT to continue to the “Conf ir m” settings page. Go to “Confir m” on page 4-8 in the ma nual for details about the settings . Parameter Description Management IP Address Management IP address of th e Barricade (Default:192.168.2.1 ...

  • SMC Networks SMC7908VoWBRA2 - page 53

    A DV ANCE D S ETUP 4-17 Advanced Setup The left-hand side displays the main menu and the righ t-hand side shows descriptiv e infor mation. The advanced management interface contains 16 main menu items as described in the following table. Menu Description System Sets the local time zone, the password for administrator access, and the IP address of a ...

  • SMC Networks SMC7908VoWBRA2 - page 54

    C ONFIGURING THE V OICE ADSL R OUTER 4-18 Tools Contains op tions to backup & restore the current co nfiguration, restore all configuration settings to the factory defaults, update system firmware, or reset the system. Status Provides WAN connec tion type and status, firmware and hardware version numbers , system IP settings, as wel l as DHCP, ...

  • SMC Networks SMC7908VoWBRA2 - page 55

    A DV ANCE D S ETUP 4-19 SYSTEM Time Settings Select your local time zone from th e drop-down list. This infor mation is used for log entries and client filtering . F or accurate timing of log entries an d system events , you need to set the time zone. Select your time zone from the drop-down list. If daylig ht savings is used in y our area, check t ...

  • SMC Networks SMC7908VoWBRA2 - page 56

    C ONFIGURING THE V OICE ADSL R OUTER 4-20 Password Settings Use this screen to c hange the passw ord for accessing the management interface. P asswords can contain from 3~12 al phanumeric characters and are case sensitiv e. Note: If you lost the password, or yo u cannot gain access to the user interface, press the blue reset bu tton on the rear pan ...

  • SMC Networks SMC7908VoWBRA2 - page 57

    A DV ANCE D S ETUP 4-21 Remote Management By default, ma nagement access is only a vailable to users on your local network. Ho wever , you can also mana ge the Bar ricade from a remote host by ente ring the IP address of a remote comput er on this screen. Check the Enabled check box, and enter the IP address of the Host Address and click Sav e Sett ...

  • SMC Networks SMC7908VoWBRA2 - page 58

    C ONFIGURING THE V OICE ADSL R OUTER 4-22 WAN Specify the W AN connection paramete rs provided by y our Inter net Ser vice Provider (ISP). The Bar ricade suppor ts the following modes: •A T M P V C • Clone MAC •D N S ATM PVC T o configure your Internet Connection settings , select ATM PVC , then VC 1 . Click the V C to set the detailed par am ...

  • SMC Networks SMC7908VoWBRA2 - page 59

    A DV ANCE D S ETUP 4-23 Parameter Description VC1 to VC8 Click on the des ired VC to configure the co nnection parame ters. VPI/VCI Displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) co nfigured for the c orresponding VC. Encapsulation Disp lays the Encapsulatio n configured for the corres ponding VC. Encap sulation spe ...

  • SMC Networks SMC7908VoWBRA2 - page 60

    C ONFIGURING THE V OICE ADSL R OUTER 4-24 ATM Interface 1483 Bridging Enter the settings provided by y our ISP . In Bridging mode the Barricade will act as a Bridge passing the IP addressing directly to the attached client PC. Parameter Description VPI/V CI Data flows are broken up into fixed length cells, each of wh ich contain s a Virtual Path Id ...

  • SMC Networks SMC7908VoWBRA2 - page 61

    A DV ANCE D S ETUP 4-25 PPPoA Parameter Description VPI/VCI Enter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) suppl ied by your ISP. Encapsulation S elect the encapsulation us ed by ISP from the drop-down list. QoS Class ATM QoS classes including CBR, UBR and VBR PCR/SCR/MBS QoS Parameters - PCR, SCR and MBS are configura ...

  • SMC Networks SMC7908VoWBRA2 - page 62

    C ONFIGURING THE V OICE ADSL R OUTER 4-26 1483 Routing Confirm Password Confirm pa ssword MTU Leave the Maximum Transmission Unit (MTU) at the default value (1500) unless you h ave a particular reason to change it. Parameter Description IP Address Enter the IP addr ess provided by your ISP. Subnet Mask Enter the subnet mask address provided b y you ...

  • SMC Networks SMC7908VoWBRA2 - page 63

    A DV ANCE D S ETUP 4-27 PPPoE Parameter Description IP Address Enter the IP address provided by your ISP. Subnet Mask Enter the subnet mask address provided b y your ISP. VPI/VCI Enter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) suppl ied by your ISP. Encapsulation S elect the encapsulation us ed by ISP from the drop-down ...

  • SMC Networks SMC7908VoWBRA2 - page 64

    C ONFIGURING THE V OICE ADSL R OUTER 4-28 MAC Encapsul ated Routing Parameter Description IP Address Enter the IP addr ess provided by your ISP. Subnet Mask Enter the subnet mask address provided b y your ISP. Default Gateway Enter the gateway address pro vided by your ISP. VPI/VCI Enter the Virtual Path Identifier (VPI) an d Virtual Circuit Identi ...

  • SMC Networks SMC7908VoWBRA2 - page 65

    A DV ANCE D S ETUP 4-29 Clone MAC Address Some ISPs require yo u to register y our MA C address with them. If this is the case, and y ou hav e previously re gistered the MA C a ddress of another device, the MA C address of the Bar ricade must be changed to the MA C address that you have registered with y our ISP . ...

  • SMC Networks SMC7908VoWBRA2 - page 66

    C ONFIGURING THE V OICE ADSL R OUTER 4-30 DNS A Domain Na me Ser ver (DNS) is an index of IP a ddresses and W eb addresses . If you type a web addr ess into your bro wser, suc h as www .smc .com, a DNS ser ver will find th at name in its index and find the matching IP address: xxx.xxx.xxx.xxx. Most ISPs provide a DNS ser ver for speed and conv enie ...

  • SMC Networks SMC7908VoWBRA2 - page 67

    A DV ANCE D S ETUP 4-31 LAN The LAN settings menu allows y ou to change the default IP address of the Bar ricade , modify the DHCP serv er settings and create VLAN’ s . ...

  • SMC Networks SMC7908VoWBRA2 - page 68

    C ONFIGURING THE V OICE ADSL R OUTER 4-32 Parameter Description LAN IP IP Address The IP addr ess o f the Barricade. IP Subnet Mask The subnet mask of the Barricade. DHCP Server This option allows you to enable or disable the DHCP server function. By default DHCP is en abled. VLAN Bind ing LAN1 to LAN4 This option allows you to change VLAN memb ers ...

  • SMC Networks SMC7908VoWBRA2 - page 69

    A DV ANCE D S ETUP 4-33 VLAN The Bar ricade’ s VLAN function can be used to create up to 4 VLAN profiles . Once a VLAN profile is create d interfaces can be assigned to the VLAN profile. This is done by setting the VLAN binding . Notes: Only interfaces of IEEE 802 brid ging type (LAN ports 1-4 and 1483 Bridging PVC’s) can be assigned to a VLAN. ...

  • SMC Networks SMC7908VoWBRA2 - page 70

    C ONFIGURING THE V OICE ADSL R OUTER 4-34 VLAN Profile Configure the VLAN settings in this screen. • Description: Enter a description fo r the VLAN group, for example: Admin PC’s • IP Address: Enter IP address for the VLAN. • Subnet Mask: Enter Subnet Mask address for the VLAN. • NAT Domain: Set NAT Domain to private or public. • IGMP S ...

  • SMC Networks SMC7908VoWBRA2 - page 71

    A DV ANCE D S ETUP 4-35 WIRELESS The Bar ric ade also operates as a wire less access point, allowing wireless computers to communicate with each ot her . T o configure this function, all you need to do is enable the wirele ss function, define the radio channel, the SSID , and the security options . Check Ena ble and click SA VE SETTINGS . ...

  • SMC Networks SMC7908VoWBRA2 - page 72

    C ONFIGURING THE V OICE ADSL R OUTER 4-36 Channel and SSID Y ou must specify a com mon radio cha nnel and SSID (Ser vice Set ID) to be used b y the Barricade and all of its wireless clients . Be sure you configure all of its clie nts to the same values . Parameter Description SSID Service Set ID. The SSID must be the same on the Barricade and all o ...

  • SMC Networks SMC7908VoWBRA2 - page 73

    A DV ANCE D S ETUP 4-37 Access Control Using the Access Control functionality , you can restrict access based on MA C address . Each PC has a uniqu e identifier known as a Medi um Access Control (MA C) address . With MA C filtering e nabled, the computers whose MA C address you hav e listed in the filtering table will be able to connect (or will be ...

  • SMC Networks SMC7908VoWBRA2 - page 74

    C ONFIGURING THE V OICE ADSL R OUTER 4-38 Security T o make your wireless netw ork safe , you should turn on the security function. The Bar ricade supports th e following security mechanism: •W P A / W P A 2 •W P A 2 O n l y •W P A O n l y •W E P ...

  • SMC Networks SMC7908VoWBRA2 - page 75

    A DV ANCE D S ETUP 4-39 WPA/WPA2 Wi-Fi Protected Access (WP A) combines temporal k ey integrity protocol (TKIP) and 802.1x mechanisms . It pr ovides dynamic key encryption and 802.1x authentication ser vice. Wi-Fi Protected Access 2 (WP A2) is a pr oduct certific ation that is av ailable through the Wi-Fi Alliance. WP A2 ce r tifies that wireless e ...

  • SMC Networks SMC7908VoWBRA2 - page 76

    C ONFIGURING THE V OICE ADSL R OUTER 4-40 WPA2 Only WP A2 is a product cer tification th at is a vailable through the Wi-Fi Alliance. WP A2 ce rtifies that wirele ss equipment is compatible with the IEEE 802.11i standard. The WP A2 produc t certification fo r mally re places Wired Equivalent Priv acy (WEP) and th e other security features of the or ...

  • SMC Networks SMC7908VoWBRA2 - page 77

    A DV ANCE D S ETUP 4-41 WPA Only Wi-Fi Protected Access (WP A) combines temporal k ey integrity protocol (TKIP) and 802.1x mechanisms . It pr ovides dynamic key encryption and 802.1x authentication ser vice. Parameter Description Authenticat ion Choose 802.1X or Pre-shar ed Key to use as the authen tication method. • 802.1X: for the enterprise ne ...

  • SMC Networks SMC7908VoWBRA2 - page 78

    C ONFIGURING THE V OICE ADSL R OUTER 4-42 802.1X If 802.1x is used in your netw ork, th en you should enable this fun ction for the Barricade. Parameter Description Authentication Choose 802.1X authentication option. Session Idle timeout Defines a maximu m period of time for which the connection is maintained during inactivi ty. Re-Authentication P ...

  • SMC Networks SMC7908VoWBRA2 - page 79

    A DV ANCE D S ETUP 4-43 WEP If you w ant to use WEP to protect your wireless netw ork, you need to set the same parameters for the Bar ricade and all your wireless clients . Y ou may automatically g enerate encr yption keys or manually enter the key s . T o generate the key automatically with passphrase, c heck the Passphrase box, enter a s tring o ...

  • SMC Networks SMC7908VoWBRA2 - page 80

    C ONFIGURING THE V OICE ADSL R OUTER 4-44 T o manually configure the encr yption ke y , enter fi ve hexadecimal pairs of digits for the 64-bit key , or enter 13 pairs for the 128-bit key . (A hexadecimal d igit is a number or letter in the range 0-9 or A-F .) Note: WEP protects dat a transmitte d between wireless nodes, but does not protect any tra ...

  • SMC Networks SMC7908VoWBRA2 - page 81

    A DV ANCE D S ETUP 4-45 NAT Network Address T r anslation allows mult iple users to access the Internet sharing one public IP . ...

  • SMC Networks SMC7908VoWBRA2 - page 82

    C ONFIGURING THE V OICE ADSL R OUTER 4-46 Address Mapping Allows one or more public IP addresses to be shared b y multiple internal users . T his also hides the inter nal netw ork for increased privacy and security . Ente r the Public IP addres s you wish to share into the Global IP field. Enter a range of inter nal IPs that will share the global I ...

  • SMC Networks SMC7908VoWBRA2 - page 83

    A DV ANCE D S ETUP 4-47 Virtual Server If you configure the Barricade as a vi r tual ser ver, remote users accessing ser vices such as w eb or FTP at your local site via public IP addresses can be automaticall y redirected to local se r vers configu r ed with pri vate IP addresses . In other words , de pendin g on the requested se r vice (TCP/UDP p ...

  • SMC Networks SMC7908VoWBRA2 - page 84

    C ONFIGURING THE V OICE ADSL R OUTER 4-48 Special Application Some applications require multiple c onnections , such as Inter net g aming, video-conferenci ng, and Internet te lephony . Th ese applications may not work when Netw ork Address T ranslation (NAT) is en abled. If you need to r un applications that require mu ltip le connections, use the ...

  • SMC Networks SMC7908VoWBRA2 - page 85

    A DV ANCE D S ETUP 4-49 NAT Mapping Table This screen displa ys the current NAPT (Netw ork Address P or t T ranslation) address mappings . NA T Mapping T able displays the current NAPT address mappings . T he NA T address mappings are listed 20 lin es per page, click the control buttons to mo ve forw ards and backwards . As the NAT mapping is dynam ...

  • SMC Networks SMC7908VoWBRA2 - page 86

    C ONFIGURING THE V OICE ADSL R OUTER 4-50 ROUTE These scree ns define routin g related parameters , incl uding static routes and RIP (Routing Information Protocol) parameters. Static Route Click Add to add a new static route to the list, or chec k the box of an already enter ed route and click Modify . Clicking Delete will remove an entry from the ...

  • SMC Networks SMC7908VoWBRA2 - page 87

    A DV ANCE D S ETUP 4-51 RIP Parameter Description General RIP Paramete rs RIP mode Globally enab les or disables RIP. Auto summary If Auto summary is disabled, then RIP packets will include sub-ne twork informatio n from all sub-network s connected to the ro uter. If enabled, this sub-networ k information will be summarized to one piece of informat ...

  • SMC Networks SMC7908VoWBRA2 - page 88

    C ONFIGURING THE V OICE ADSL R OUTER 4-52 RIP sends routing-update messages at regular inter vals and when the network topology changes . When a router receiv es a routing update that includes cha ng es to an entry , it updates its routing table to reflect the new route. RIP routers maintain only the best route to a destination. After updating its ...

  • SMC Networks SMC7908VoWBRA2 - page 89

    A DV ANCE D S ETUP 4-53 Routing Table Parameter Description Flags Indicates the route status: C = Direct c onnection on the same s ubnet. S = Static route. R = RIP (Routing Inform ation Protoc ol) assigned route. I = ICMP (Intern et Control Message P rotocol) Redirec t route. Network Address Desti nation IP address. Netmask The subnetwork ass oci a ...

  • SMC Networks SMC7908VoWBRA2 - page 90

    C ONFIGURING THE V OICE ADSL R OUTER 4-54 FIREWALL The Bar ricade Router’ s firewall inspects packets at the application la yer, maintains TCP and UDP session infor mation inc luding time-outs and the number of activ e sessions, and provid es the ability to detect and prevent certain types of network attac ks . Network attac ks that deny access t ...

  • SMC Networks SMC7908VoWBRA2 - page 91

    A DV ANCE D S ETUP 4-55 Access Control Access Control allows us ers to define the outg oing traf fic permitted or not-per mitted through the W AN interfac e. The default is to per mit all outg oing traffic . The following items are on the Access Control screen: Parameter Description Enable Filtering Function Enable or Dis able Access control func t ...

  • SMC Networks SMC7908VoWBRA2 - page 92

    C ONFIGURING THE V OICE ADSL R OUTER 4-56 T o create a new access control r ule: 1. Click Add PC on the Access Control screen. T he Access Control Add PC screen will appear . 2. Define the appropriate settin gs for client PC ser vic es . 3. Click OK and then clic k SA VE SETTINGS to save yo ur settings. ...

  • SMC Networks SMC7908VoWBRA2 - page 93

    A DV ANCE D S ETUP 4-57 MAC Filter The MAC Filter allows you to define what client PC’ s can access the Inter net. When enabled only the MAC addresses defined in the MA C Filtering table will have access to the In terne t. All other client devices will be denied access . Y ou can enter up to 32 MA C addresses in this table. 1. MA C Address Contro ...

  • SMC Networks SMC7908VoWBRA2 - page 94

    C ONFIGURING THE V OICE ADSL R OUTER 4-58 URL Blocking The Bar ricade all ows the user to bloc k access to web sites by entering either a full URL address or just a ke yw ord. T his feature can be used to protect children from access ing violent or pornog raphic web sites . Y ou can define up to 30 sites here. ...

  • SMC Networks SMC7908VoWBRA2 - page 95

    A DV ANCE D S ETUP 4-59 Schedule Rule Y ou may filter Inter net access for loca l clients based on r ules . Each access control r ule may be acti vated at a sc heduled time. Define the schedule on the Schedule Rule screen , and apply the r ule on the Access Control screen. ...

  • SMC Networks SMC7908VoWBRA2 - page 96

    C ONFIGURING THE V OICE ADSL R OUTER 4-60 F ollow these steps to add a schedule r ule: 1. Click Add Schedule R u le on the Schedule R ule scree n. The Edit Schedule R ule screen will appear . 2. Define the appropriate sett ings for a schedule rul e. 3. Click OK and then clic k SA VE SETTINGS to save yo ur settings. ...

  • SMC Networks SMC7908VoWBRA2 - page 97

    A DV ANCE D S ETUP 4-61 Intrusion Detection • Intrusion Detection Feature Stateful Packet Inspection (SPI) and Anti-DoS firewall protection (Default: Enabled) — The Intrusion Detection Feature of the Barricade Router limits access for incoming tr affic at the WAN port. When the SPI feature is turned on, all incom ing pa ckets will be blocked ex ...

  • SMC Networks SMC7908VoWBRA2 - page 98

    C ONFIGURING THE V OICE ADSL R OUTER 4-62 ...

  • SMC Networks SMC7908VoWBRA2 - page 99

    A DV ANCE D S ETUP 4-63 • Stateful Packet Inspection This is called a “stateful” packet inspecti on because it examines the contents of the packet to determine th e state of the communications; i.e., it ensures that the stated destina tion co mputer has previously request e d the current communication. This is a way of ensuring that all commu ...

  • SMC Networks SMC7908VoWBRA2 - page 100

    C ONFIGURING THE V OICE ADSL R OUTER 4-64 • Connection Policy Enter the appropriate va lues for TC P/UDP sessions as described in the following table . Parameter Defaults Description Fragmentation half-open wai t 10 sec Configures the number of seconds that a packet state structure remai ns active. When the timeout value expires, the router drops ...

  • SMC Networks SMC7908VoWBRA2 - page 101

    A DV ANCE D S ETUP 4-65 • DoS Criteria and Port Scan Criteri a Set up DoS and port scan criteria in the spaces provided (as sho wn below). Note: The firewall does not significantly affect system performance, so we advise enabl ing the prevent i on features to protect your network. Parameter Defaults Description Total inc omplete TCP/UDP sessions ...

  • SMC Networks SMC7908VoWBRA2 - page 102

    C ONFIGURING THE V OICE ADSL R OUTER 4-66 DMZ If you ha ve a client PC that cannot r un an Internet a pplication properly from behind the firewall, y ou can ope n the client up to unrestricted two-w ay Inter net access. Enter the IP address of a DMZ (Demilitarized Zone) host on this screen. Adding a c lient to the DMZ may expose your local network ...

  • SMC Networks SMC7908VoWBRA2 - page 103

    A DV ANCE D S ETUP 4-67 SNMP Use the SNMP configuration screen to displa y and modify parameters for the Simple Netw ork Manage ment Protocol (SNMP). ...

  • SMC Networks SMC7908VoWBRA2 - page 104

    C ONFIGURING THE V OICE ADSL R OUTER 4-68 Community A computer atta ched to the netw ork, called a Netw ork Management Station (NMS), can be used to access th is infor mation. Access rights to the agent are controlled by community strings . T o com municate with the Barricade, the NMS must first subm it a valid community string for authentication. ...

  • SMC Networks SMC7908VoWBRA2 - page 105

    A DV ANCE D S ETUP 4-69 Trap Specify the IP a d dress of the NMS to notify when a signific ant ev ent is detected by the agent. W hen a trap condition occurs , the SNMP ag ent sends an SNMP trap message to any NMS sp ecified as a trap recei ver . Parameter Description IP Address Traps are sent to t his address when errors or sp ecific events oc cur ...

  • SMC Networks SMC7908VoWBRA2 - page 106

    C ONFIGURING THE V OICE ADSL R OUTER 4-70 ADSL ADSL (Asymmetric Digital Subscriber Line) is designed to deliver more bandwidth downstream (fro m the centr al office to the custome r site) than upstream. T his section is used to configure the ADSL operation type and shows th e ADSL status . ADSL Parameters This screen is designed for the engine er t ...

  • SMC Networks SMC7908VoWBRA2 - page 107

    A DV ANCE D S ETUP 4-71 ADSL Status The Status screen displays infor mation on connection line status, data rate , operation data and defect indication, and statistics . ...

  • SMC Networks SMC7908VoWBRA2 - page 108

    C ONFIGURING THE V OICE ADSL R OUTER 4-72 The following items are included on this infor mation screen: Parameter Description Status Line Status Shows the curre nt status of the ADSL line co nnection. Data Rate Upstream Maximum upst ream data rate. Downstream Maximum downstream data rate. Operation Data/Defec t Indication Noise Margin Maximum upstr ...

  • SMC Networks SMC7908VoWBRA2 - page 109

    A DV ANCE D S ETUP 4-73 VoIP V oice over Internet Protocol (V oIP) is the routing of voice conv e rsations ov er the Internet or any othe r IP-based network. The voice data flows o ver a general-pur pose pack et-switched network, instead of traditional dedicated, circuit-switched voice transmission lines . VoIP Account Configure y our V oIP account ...

  • SMC Networks SMC7908VoWBRA2 - page 110

    C ONFIGURING THE V OICE ADSL R OUTER 4-74 • Select the account form the Account Profile drop-down menu. To set-up a second VoIP account, se lect Account 2 . Up to 4 accou nts can be configured. • Check the Activat ed check box to enable the account . If the box is unchecked the account is disabled . • Select your VoIP provider form the VoIP P ...

  • SMC Networks SMC7908VoWBRA2 - page 111

    A DV ANCE D S ETUP 4-75 • Input the SIP Domain , Re alm , Proxy Address , Proxy Port , Registrar Address and Registrar Port . If your VoIP provider was listed and select ed, these settings should already be conf igured. •U s e t h e Up and Down buttons to change Codec priority. The preferred Codec goes at the top. Us e the left and right arrow ...

  • SMC Networks SMC7908VoWBRA2 - page 112

    C ONFIGURING THE V OICE ADSL R OUTER 4-76 Codec’ s are used to conv er t an analog ue voice signal to digitally encoded vers ion. Codec’ s vary in the sound quality , the bandwidth required, the computational requirement s , etc. Y o u can specify which audio coding process you w ould like to use . This Bar ricade supports the following codec? ...

  • SMC Networks SMC7908VoWBRA2 - page 113

    A DV ANCE D S ETUP 4-77 VoIP Extensions Y ou can configure the Line and Phone port settings on this screen. Parameter Description Telephony Tone Country Settin g Configures tele phony tone set f or the selecte d country. Extension Number S e lect Extension Number to assi gn to the phone. This shou ld be your VoIP phone number. The extension number ...

  • SMC Networks SMC7908VoWBRA2 - page 114

    C ONFIGURING THE V OICE ADSL R OUTER 4-78 For the following 4 items, check the box to enable the functio n: • Answer calls for all numb ers Chec k this box to answe r all incoming calls. • Call Waiting Call Waiting plays audi ble tone to notify the user that a second call is in waiting. The user can place the existi ng call on hold and answer t ...

  • SMC Networks SMC7908VoWBRA2 - page 115

    A DV ANCE D S ETUP 4-79 SIP Setting The following SIP related pa ra meters are configura ble. Parameter Description SIP Parameters SIP Listen Port This option allows you to change the default SIP Listen Port. The default setting is 5060. It is recommended to le ave this value unc h anged. Codec Rate(G723, G729, G711) You can select the de sired Cod ...

  • SMC Networks SMC7908VoWBRA2 - page 116

    C ONFIGURING THE V OICE ADSL R OUTER 4-80 Port Advanced Setting There are 11 advanced functions that can be configured in this screen. • Volume Gain Cont rol: Two modes are available . The fixed gain control means the device is supporte d to supply a constant level of amplification. The adaptive mode means a specifie d power level is produced at ...

  • SMC Networks SMC7908VoWBRA2 - page 117

    A DV ANCE D S ETUP 4-81 • PLC (Packet Loss Compensation): During the transmission of a series of packets, if one of them is lost, then the device will use the mathematical algorithm to calculate a value to make up the lost packet. This function is designed to ma ke the voice conversation more smooth. • Caller ID Mode: Chec k this box to use Dua ...

  • SMC Networks SMC7908VoWBRA2 - page 118

    C ONFIGURING THE V OICE ADSL R OUTER 4-82 Parameter Description Volume Gain Control It is recommended leaving these four settings at the default value. Changing th e settings may af fect the performance o f VoIP and the voice quality. If you should need to change thes e settings, consult an experienced ne twork administr ator. Jitter Buffer Mode Ji ...

  • SMC Networks SMC7908VoWBRA2 - page 119

    A DV ANCE D S ETUP 4-83 Dialing plans Dialing plans allow y ou to define the connection type used when a specified number is dialed. F or example you may want n umbers beginning “0800” to dial out over PSTN . Al ter natively y ou may want numbers beginning “012” to dial out ov er the Internet (V oIP). Also you may want to block certain numb ...

  • SMC Networks SMC7908VoWBRA2 - page 120

    C ONFIGURING THE V OICE ADSL R OUTER 4-84 T o set-up a dialing plan, take the following steps: 1. In the Phone number column enter a specific phone number , or the starting digits of a phone number that you w a nt to create a dialing plan for . Example: If you enter “012” all phone numbers beginning “012” will dial out using the connection ...

  • SMC Networks SMC7908VoWBRA2 - page 121

    A DV ANCE D S ETUP 4-85 Quick D ialing P lans This function allows you to configure up to 20 quick dialing plans . This is done by assigning a quic k dial code for a specified phone number . • Quick Dial Code: Enter quick dial code in the range of 01 to 20. To call the pho ne number associated with the quick dial code you would need to dial *7[Qu ...

  • SMC Networks SMC7908VoWBRA2 - page 122

    C ONFIGURING THE V OICE ADSL R OUTER 4-86 The following example shows how to set up a quic k dialing plan for Frank who has the phone number 6194621719: 1. Select the v anity keypad style from the pull-do wn menu. 2. Enter the number “01” for the Quic k Dial Code. 3. Enter the name “Frank” in the V anity column. 4. Enter “6194621719” fo ...

  • SMC Networks SMC7908VoWBRA2 - page 123

    A DV ANCE D S ETUP 4-87 VoIP Status and Call logs This page displays the V oIP registration status f or accounts 1 - 4 and t he call logs . Click the Refr es h button to update the status and log . Parameter Description Account SIP accounts 1 to 4. SIP URL Displays SIP URL fo r the correspond ing acco unt. Registration Displays SIP registrati on st ...

  • SMC Networks SMC7908VoWBRA2 - page 124

    C ONFIGURING THE V OICE ADSL R OUTER 4-88 UPnP The Universal Plug and Play architec ture offers pervasiv e peer-to-peer network connecti vity of PCs of all fo r m factors, intelligent appliances, and wireless devices . UPnP enables seamless proximity netw or k in addition to control and data transfer among netw orked devices in th e office , home a ...

  • SMC Networks SMC7908VoWBRA2 - page 125

    A DV ANCE D S ETUP 4-89 QoS The QoS (Quality of Ser vic e) function allo ws you to di fferentiate V oIP traffic and provide it with high-prior ity forwarding service. In addition, you can specify the outg oing V C of V oIP pack ets to further guarantee the voice quality . Parameter Description Enable or disable QoS module funct ion Check to enable ...

  • SMC Networks SMC7908VoWBRA2 - page 126

    C ONFIGURING THE V OICE ADSL R OUTER 4-90 •A s s u r e d f o r w a r d i n g , defi ned in RFC 2597 • Expedited forwarding , defined in RFC 2598 Traffic Mapping Use this screen to classify traffic into Diffser v forwarding groups and outg oing VCs . ...

  • SMC Networks SMC7908VoWBRA2 - page 127

    A DV ANCE D S ETUP 4-91 T o create a new traffic cla ss: 1. Click ADD TRAFFIC CLASS on the Edit T raffic Class screen. 2. Define the appropriate settings for traffic class . 3. Click SA VE SETTINGS to sav e your settings . ...

  • SMC Networks SMC7908VoWBRA2 - page 128

    C ONFIGURING THE V OICE ADSL R OUTER 4-92 Traffic Statistics This screen shows the W AN outbound traffic statistics of all the Diffser v forwarding groups in the last 12 hours . ...

  • SMC Networks SMC7908VoWBRA2 - page 129

    A DV ANCE D S ETUP 4-93 DDNS Dynamic Domain Name Ser vice (DDNS) provides users on the Internet with a method to tie their domain name to a computer or ser ver . DDNS allows y our domain name to follo w your IP address automat ically by hav ing yo ur D N S re co rd s ch an g ed wh en yo u r IP ad dr es s ch an g es. Thi s DN S fea tur e is po w er ...

  • SMC Networks SMC7908VoWBRA2 - page 130

    C ONFIGURING THE V OICE ADSL R OUTER 4-94 TOOLS Use the T ools menu to bac kup the current configuration, restore a previously sav ed configur ation, update firmware, and reset the Bar ricade. Ping Utility This tool allows y ou to test your network con nection. Y ou can specify a domain name or a valid IP address of the remote host for ping test. ...

  • SMC Networks SMC7908VoWBRA2 - page 131

    A DV ANCE D S ETUP 4-95 Configuration Tools Choose a function and clic k Next . • Backup Router Configuration: this allows you to save the Barri cade’s configuration to a file. • Restore from saved Configuration file : this function is used to restore the previously saved back up configuration file. • Restore router to Factor y Defaults: th ...

  • SMC Networks SMC7908VoWBRA2 - page 132

    C ONFIGURING THE V OICE ADSL R OUTER 4-96 Firmware Upgrade Use this screen to update the fir mware or user interface to the latest vers ions. 1. Download the upg rade f ile from the SMC web site first, a nd sav e it to you r h ar d d rive. 2. Then click Browse ... to look for the downloaded file. Click BEGIN UPGRADE . Check the Status screen Infor ...

  • SMC Networks SMC7908VoWBRA2 - page 133

    A DV ANCE D S ETUP 4-97 Reset Click REBOO T ROUTER to reset the Barricade. The reset will be complete when the pow er LED stops blinking . If you perfor m a reset from this sc reen, the configurations will not be changed back to the factory default settings. Note: If you use the Reset button on th e back panel, the Barricade performs a power reset. ...

  • SMC Networks SMC7908VoWBRA2 - page 134

    C ONFIGURING THE V OICE ADSL R OUTER 4-98 STATUS The Status scre en displays W AN/LAN conne ction status , fir m ware , and hardware version n u mbers , illega l attempts to access your netw ork , as well as infor mation on DHCP clients connect ed to your netw ork. T he security log may be sav ed to a file by clicking Sav e and choosing a location. ...

  • SMC Networks SMC7908VoWBRA2 - page 135

    A DV ANCE D S ETUP 4-99 The following items are included on the Status screen: Parameter Description INTERNET Displays WAN connec tion type and status. Release Click on this button to disconnect from the WAN. Renew Click on this but ton to establish a conn ection to the WA N. GATEWAY Displays system IP settings , as well as DHCP Server and Firewall ...

  • SMC Networks SMC7908VoWBRA2 - page 136

    C ONFIGURING THE V OICE ADSL R OUTER 4-100 Finding the MAC addre ss of a Network Card WINDOWS NT4/2000/XP Click Start/Prog rams/Com mand Prompt. T ype “ipconfig /all” and press “ENTER”. The MA C address is list ed as the “Physi cal Address .” MACINTOSH Click System Preferences/Netw ork. The MA C address is listed as the “Ethernet Addr ...

  • SMC Networks SMC7908VoWBRA2 - page 137

    A-1 A PPENDI X A T ROUBLESHOOTING This section describes common probl ems you may encou nter and possible solutions to them. The Barricade can be easily monitored through panel indicators to identify problems . Troubleshooting Chart Symptom Ac tion LED Indicators Power LED is Off • Check conne ctions between th e Barricade, the external power sup ...

  • SMC Networks SMC7908VoWBRA2 - page 138

    T R OUBLESHOOTING A-2 LED Indicators Link LED is Off • Verify that the Barricade and attached device are powered on. • Be sure the cable is plugged into both th e Barricade and the correspondi ng device. • Verify that the proper cable typ e is used and that its length does not exceed the sp ecified limits. • Be sure that the network inter f ...

  • SMC Networks SMC7908VoWBRA2 - page 139

    T R OUBLESHOOTING A-3 Management Pr oblems Cannot connec t using the web browser • Be sure to have configu red the Barricade with a valid IP address, subnet mask, and default ga teway. • Check that you have a valid network co nnection to the Barricade and that the port you are usi ng has not been disabled. • Check the ne twork cabling between ...

  • SMC Networks SMC7908VoWBRA2 - page 140

    T R OUBLESHOOTING A-4 Wireless Problems A wireless PC cannot associ ate with the Barricade. • Make sure the wire less PC has the same SSID settin gs as the Barricade. See “Chan nel and SSID” on page 4- 37 • You need to have the sa me security settings on the clients and the B arricade. See “Access Control” on page 4- 38. The wireless ne ...

  • SMC Networks SMC7908VoWBRA2 - page 141

    B-1 A PPENDIX B C ABLES Ethernet Cable Caution: DO NOT plug a phone jack conne ctor into any RJ-45 port. Use only twisted-pair cables with RJ-45 connectors that conform with FCC standards. Specifications Wiring Conventions For Ethernet connections, a twisted-pa ir cable must have two pairs of wires. Each wire pair is identified by two different col ...

  • SMC Networks SMC7908VoWBRA2 - page 142

    C ABLES B-2 Each wire pair must be attach ed to the RJ-45 conn ectors in a specifi c orientation. The following figure illu strates how the pins on an Ethernet RJ-45 connector are number ed. Be sure to hold the connectors in the same orientation when attaching the wires to the pins. Figure B-1. RJ-45 Ethernet Connector Pin Numbers RJ-45 Port Connec ...

  • SMC Networks SMC7908VoWBRA2 - page 143

    E THER NET C ABLE B-3 Pin Assignments With 100B ASE-TX/10 B ASE -T cable, pins 1 and 2 are used for transmitting data, and pins 3 and 6 for receiving data. Straight-Through Wiring If the por t on the attached device has internal crossover wir ing (MDI-X), then use straight-through cable . RJ-45 Pin Assignments Pin Number As signment 1 1T x + 2T x - ...

  • SMC Networks SMC7908VoWBRA2 - page 144

    C ABLES B-4 Crossover Wiring If the por t on the attached device has straight-through wi ring (MDI), use crossov er cable. Crossover Cable Pin Assignments End 1 End 2 1 (Tx+) 3 (Rx+) 2 (Tx-) 6 (Rx-) 3 (Rx+) 1 (Tx+) 6 (Rx-) 2 ( Tx-) ...

  • SMC Networks SMC7908VoWBRA2 - page 145

    ADSL C ABLE B-5 ADSL Cable Use standard telephone cable to connect the RJ-11 tele phone wall outlet to the RJ-45 ADSL port on the ADSL Router . Caution: Do not plug a phone jack connector into an RJ-45 port. Specifications Wiring Conventions F or ADSL connections, a ca ble requires one pair of wires . Each wire is identified b y different colors . ...

  • SMC Networks SMC7908VoWBRA2 - page 146

    C ABLES B-6 Figure B-3. RJ-11 Pinouts Pin Signal Name Wire Color 1N o t u s e d 2 Line 2 Tip Black or White/Orange 3 Line 1 Ring Red or Blue/White 4 Line 1 Tip Gre en or White/Blue 5 Line 2 Ring Y ellow or Orange/White 6N o t u s e d 123456 Blue/White White/Blue R1 T1 123456 Red Green R1 T1 R2 T2 Black Y ellow 123456 Blue/White White/Blue R1 T1 R2 ...

  • SMC Networks SMC7908VoWBRA2 - page 147

    C-1 A PPENDI X C S PECIFICATIONS Physical Characteristics Por ts F our 10/100Mbps RJ-45 por ts One ADSL RJ-11 port T wo Phone ports One Line port ADSL F eatur es Supports DMT line modulation Supports Annex A Full-Rate ADSL: up to 8 Mbps downstream, up to 1 Mbps upstream (G .9 92. 1 &T1.413, Issue 2) and ADSL2 (G .992.3) and ADSl2+ (G .992.5) Su ...

  • SMC Networks SMC7908VoWBRA2 - page 148

    S PECIFICATIONS C-2 Security F eatures P assword protected c onfiguration access User authentication (P AP/CHAP) with PPP Firew all NA T NAPT VPN pass through (IPSec-ESP T unnel mode,L2TP , PPTP) LAN F eatures IEEE 802.1D (self-learning transparent Bridging) DHCP Ser ver DNS Proxy Static Routing, RIPv1 and RIP Vo I P F e a t u r e s SIP Codec - G . ...

  • SMC Networks SMC7908VoWBRA2 - page 149

    S PECIFICATIONS C-3 Operating Channels IEEE 802.11b compliant: 11 channels (US , Canada) 13 channels (ETSI) 2 Channels (Spain) 4 Channels (France) 14 channels (J apan) Operating Channels IEEE 802.11g compliant: 13 channels (US , Canada, Europe, J apan) RF Output P ower Modulation Rate-Output Po wer (dBm) 802.11b - 1Mbps 16 802.11b - 2Mbps 16 802.11 ...

  • SMC Networks SMC7908VoWBRA2 - page 150

    S PECIFICATIONS C-4 Modulation Rate-Receiver Sensiti vity Typical (dBm) 802.11g - 6Mbps -88 802.11g - 9Mbps -87 802.11g - 12Mbps -84 802.11g - 18Mbps -82 802.11g - 24Mbps -79 802.11g - 36Mbps -75 802.11g - 48Mbps -68 802.11g - 54Mbps -68 T emperature: IEC 68 -2-14 0 to 50 deg rees C (Standard Operating) -40 to 70 deg ree C (Non-operation) Humidity ...

  • SMC Networks SMC7908VoWBRA2 - page 151

    TECHNIC AL SUPPORT F rom U.S.A. and C anada (2 4 hours a day , 7 days a week) Phn: 800-SMC -4- YOU / 9 49-6 79-8000 F ax: 94 9-502- 3400 ENGLISH T echnical Support inf ormation av ailable at www .smc.com FRENCH Informations S uppor t T echnique sur www .smc.com DEUTSCH T echnischer Support und weiter e Information unter www .smc.com SP ANISH En www ...

Produzent SMC Networks Kategorie Network Router

Dokumente, die wir vom Produzenten des Geräts SMC Networks SMC7908VoWBRA2 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen SMC Networks
- Bedienungsanleitungen SMC7908VoWBRA2
- Produktkarten SMC Networks
- Informationsbroschüren
- oder Energieetiketten SMC Networks SMC7908VoWBRA2
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung SMC Networks SMC7908VoWBRA2.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen SMC Networks SMC7908VoWBRA2, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen SMC Networks SMC7908VoWBRA2. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts SMC Networks SMC7908VoWBRA2 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts SMC Networks SMC7908VoWBRA2, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von SMC Networks SMC7908VoWBRA2 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von SMC Networks SMC7908VoWBRA2 verständlich ist.

Eine gänzliche Bedienungsanleitung von SMC Networks sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von SMC Networks SMC7908VoWBRA2 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von SMC Networks SMC7908VoWBRA2 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich SMC Networks SMC7908VoWBRA2, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts SMC Networks SMC7908VoWBRA2 - die uns die ersten Schritte während der Nutzung von SMC Networks SMC7908VoWBRA2 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit SMC Networks SMC7908VoWBRA2 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von SMC Networks SMC7908VoWBRA2 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich SMC Networks SMC7908VoWBRA2?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit SMC Networks SMC7908VoWBRA2 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit SMC Networks SMC7908VoWBRA2 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)