-
Climate Technology 43355 - page 1
Owner’ s Manual Model 43355 PROGRAMMABLE THERMOST A T M AM 4 TEMP ...
-
Climate Technology 43355 - page 2
2 Intr oduction CONGRA TULA TIONS! Y our new Climate T echnology electronic thermostat will provide years of reliable service . By saving en- ergy , your thermostat will pay for itself during its first season of use . T hank you for buying a Climate T echnology product! Please read this manual for complete instructions on installing and operating y ...
-
Climate Technology 43355 - page 3
3 T able of Contents Read This Before Installing T hermostat 5 F eatures 7 What Y ou Need 8 Remove Old Thermostat 8 Wire Labeling 9 Mount W allplate and T hermostat 11 Connect Wires and Mount Thermostat Cover to Wall Plate 12 Selector Switches 13 Setting T ime and Day 14 Default Programs 16 P ersonal Program Schedule 17 Manual Programming 18 W eekd ...
-
Climate Technology 43355 - page 4
4 P ermanent Manual Override 26 V acation Override (Programmable Hold) 27 Home T oday 28 Energy Monitor 30 F ilter Monitor 31 Auto Recovery 32 SP AN Setting Mode 34 Backlighting 35 Low Battery W arning 36 Error Mode 37 Auto Cut-Off 37 Mechanical Heat Back-Up 37 Problems & Solutions 38 T echnical Support 39 Heat / Cool Systems 40 Single-Stage He ...
-
Climate Technology 43355 - page 5
5 Read This Before Installing Thermostat IMPORT ANT 1 Read the entire installation section of this Owner’ s Manual thoroughly before you begin to install or operate your Climate T echnology T her - mostat. INST ALLA TION 2 All installation is normally performed at your thermostat. ARMCHAIR PROGRAMMING 3 Y ou can program your thermostat before ins ...
-
Climate Technology 43355 - page 6
6 Read This Before Installing Thermostat (continued) POWER F AILURE 7 Whenever the main power is interrupted or fails , the battery power retains the programs and cur - rent time . AUTO RECOVER Y 8 Y our thermostat is set from the factory to gradually recover the room temperature from an energy sav- ing program to your comfort program. Therefore , ...
-
Climate Technology 43355 - page 7
7 F eatur es energy home today fan auto on system heat cool off r eset day/time prog day program filter hold /return HEA T TEMP AM SA 2 LCD Display: Shows time , day , temperature , program number , and other feature information as required. Reset: Press with a paper clip to reset the thermostat and return to power -up settings . Program Day K ey: ...
-
Climate Technology 43355 - page 8
8 INST ALLA TION What Y ou Need T his thermostat includes two #8 screws and two w all anchors for mounting. T o install your thermostat, you should have the following tools and materials . ■ Phillips and Slotted Screwdrivers ■ Hammer ■ Electric drill and 3/16" bit ■ T wo 1.5 V (AA) size alkaline batteries (included) Remove Old Thermost ...
-
Climate Technology 43355 - page 9
9 Wire Labeling ■ Each wire coming from the wall to the existing thermostat is connected to a terminal point on that thermostat. Each of these terminal points is usually mark ed with a code letter as shown in T able A on the next page. ■ Note that this thermostat has multiple function terminals that allow Single-Stage Heat Pump ca- pability . S ...
-
Climate Technology 43355 - page 10
10 INST ALLA TION T able A NO TE: Do not connect a “Common” wire (sometimes labeled “C”) to any terminal on this thermostat. Tape up the wire and do not use. This wire provides electricity to non-battery powered thermostats. RH G RC W/B Y/O Y1 RH, R, VR or 4 24 V olt RC, VC 24 V olt Cool G or F Fa n Y, C or M Air Conditioning Compressor - o ...
-
Climate Technology 43355 - page 11
11 Mount W allplate and Thermostat ■ Remove the wallplate from your thermostat by pressing the release tab on the bottom of the thermostat. (See F igure 2.) ■ P osition w allplate on w all and pull existing wires through large opening. T hen level for appearance . Mark holes for plastic anchors provided if your existing holes do not line up wit ...
-
Climate Technology 43355 - page 12
12 INST ALLA TION Connect Wires and Mount Thermostat Cover to W all Plate ■ Match and connect the labeled wires to the appro- priate coded terminal screws on the wallplate . (See F igure 4, 5.) Ignore any wires which may be present, but which were not connected to the old thermostat. ■ Refer to the Wiring Diagrams below to be sure your system i ...
-
Climate Technology 43355 - page 13
13 Selector Switches In order for this Climate T echnology thermostat to control your system, the system type must be speci- fied by selector switches on the printed circuit board inside the thermostat. NO TE: When changing these features after instal- lation, move the HEAT / COOL selector switch to OFF before removing the thermostat from the wall. ...
-
Climate Technology 43355 - page 14
14 PROGRAMMING Setting Time and Day ■ T he LCD will show this information when batteries are first installed, or after the Reset button is pressed. T he temperature will update after a few seconds . ■ During time and day setting mode , the temperature and program displays will go blank. ■ Example: Set the Thermostat to the current time of 2:1 ...
-
Climate Technology 43355 - page 15
STEP 3: ■ Press again to change from minute setting to day setting. The current day will be flashing. ■ Press to change the Day up or down to the current day . STEP 4: ■ Press again to change back to the normal display . NO TE: You may press hold /return at any time during Day and Time setting to return to the normal display. DA YLIGHT SA VIN ...
-
Climate Technology 43355 - page 16
16 PROGRAMMING Setting Time and Day (continued) 12 HR. / 24 HR. TIME FORMA T Y our thermostat is set from the factory in normal 12 (AM / PM) time format. T o change to 24 hour (military) time , press program at any time while the Hour , Minute , or Day is flashing to toggle between the 12 hour and 24 hour formats . T he AM / PM indicator will not b ...
-
Climate Technology 43355 - page 17
17 Personal Program Schedule Before programming or changing programs , use this P ersonal Program Schedule to determine which times and temperature settings will best satisfy both your comfort and energy saving requirements . Use a pencil so you can revise your records each time you change your temperature settings . Heating Day Prog . 1 Prog . 2 P ...
-
Climate Technology 43355 - page 18
18 PROGRAMMING Manual Programming ■ Y our thermostat can be programmed for week- days and week ends , or have unique programs for all 7 days . Use Weekday/Week end Programming below or 7-day Programming on page 21 to enter or revise programs to match your P ersonal Pro- gram Schedule . ■ F amiliarize yourself with Manual Programming, so that yo ...
-
Climate Technology 43355 - page 19
(continued) W eekday/W eekend Pr ogramming ■ Slide System Selector Switch to HEA T or COOL to program the corresponding system. NO TE: If the system selector is in the OFF position, no programming is permitted. The LCD display will show only dashes when the program key is pressed. STEP 1: ■ Press to enter program mode . HEAT or COOL will be dis ...
-
Climate Technology 43355 - page 20
20 PROGRAMMING W eekday/W eekend Pr ogramming (continued) STEP 4: ■ Press again to change to the program temperature . T he current temperature will be flashing. ■ Press to change the temperature . STEP 5: ■ Press again to move to the next program number . ■ Repeat steps 3 - 5 to change the remaining weekday programs . STEP 6: ■ Press to ...
-
Climate Technology 43355 - page 21
7-Day Programming ■ Slide System Selector Switch to HEA T or COOL to program the corresponding system. STEP 1 ■ Press to enter program mode , display shows week- day programs . ■ Press 2 times to reach the Monday program. Step 2 ■ Use , and program k eys to set the 4 programs for Monday . Step 3 ■ Press to change to the next day’ s prog ...
-
Climate Technology 43355 - page 22
22 PROGRAMMING Reviewing Pr ograms Y ou may want to review the programs to confirm that the settings are compatible with your lifestyle . ■ Press to display M – F programs . ■ Press repeatedly to cycle through the 4 programs . ■ Press to display the Sa – Su programs . ■ Press repeatedly to cycle through the 4 programs . ■ Press to dis ...
-
Climate Technology 43355 - page 23
■ Press again to change to Monday’ s program. ■ Continue pressing to cycle through each day . ■ Press repeatedly to cycle through the 4 programs . ■ Press to return to normal mode . ■ After 15 seconds , the thermostat will return to nor - mal mode automatically . NO TE: Programs take affect as soon as the thermostat returns to normal mo ...
-
Climate Technology 43355 - page 24
24 OPERA TION System Selector Switch T he System Selector switch on the front of the thermostat determines the operating mode of the thermostat. Y ou may select COOL, OFF , HEA T . NO TE: Anytime you install or remove the thermostat from the wallplate, slide the System Selector to the OFF position to prevent the possibility of a rapid system On-Off ...
-
Climate Technology 43355 - page 25
25 T emporary Manual Override To temporarily change the current set temperatur e without affecting your program: ■ Press and hold for about 1 second to enter Manual Override mode . When display flashes , you can release the k ey . ■ Press again to change to your desired Set T empera- ture . Hold the key for 2 seconds to fast-adv ance the Set T ...
-
Climate Technology 43355 - page 26
26 OPERA TION Permanent Manual Override To hold your Manual Override for vacation or just an extended period of time: ■ Press to mak e the current program temperature the HOLD temperature . HOLD will be displayed on the LCD , and the Program number will disappear . ■ F ollow the T emporary Manual Override instructions above to change the P erma ...
-
Climate Technology 43355 - page 27
V acation Override (Programmable Hold) T his thermostat can hold a fixed temperature for a selected number of days (up to 30). After the selected number of days , the thermostat will return to normal program operation. This feature allows you to return home to your normal comfort setpoint temperatures . ■ Press and hold for 2 seconds . Display wi ...
-
Climate Technology 43355 - page 28
28 OPERA TION Home T oday T his Climate T echnology patented feature allows you to quickly and temporarily override your energy saving program setting on days when you are normally aw ay from home with one k ey press . ■ Press to enter the Home T oday override. T he highest program temperature for today will be selected from your programs in Heat ...
-
Climate Technology 43355 - page 29
■ If the system is changed between Heat and Cool modes during the “Home T oday” override period, the setpoint temperature will be automatically updated. It will auto- matically change from the highest heat program setpoint to the lowest cool program setpoint, or from the lowest cool program setpoint to the highest heat program setpoint. ■ P ...
-
Climate Technology 43355 - page 30
30 OPERA TION Energy Monitor energy Usage Hr Min T oday energy T he Energy monitor feature measures and stores the amount of time the heating and air conditioning sys- tem operates . Usage can be displayed for T oday (since 12am), Y esterday , This Week (since Monday), Last W eek (last Monday through Sunday), and T otal (up to 999 Hrs . 59 Min.). B ...
-
Climate Technology 43355 - page 31
31 Filter Monitor Y our thermostat also keeps a record of the number of hours your filter has been in use . T o maximize your system’s performance and energy efficiency , change or clean your filter regularly . ■ When the total system run time for heat and cool reaches 400 hours , FIL TER will flash on the LCD display to remind you to clean or ...
-
Climate Technology 43355 - page 32
32 OPERA TION F or example , in Heat mode , you could have the follow- ing programs: Program #4 (Overnight) Program #1 (Morning) Set T emp = 60 ° F Set T emp = 68 ° F T ime = 10pm T ime = 6am T he room temperature fell to 60 ° F overnight. Rather than having the thermostat turning on at 6am, Auto Recovery would note the temperature difference be ...
-
Climate Technology 43355 - page 33
33 Details of Auto Recovery Operation: ■ Auto Recovery can be disabled by sliding the Re- covery switch on the circuit board to the DISABLE position. Refer to page 13. ■ Auto Recovery will not operate if P ermanent hold, T emporary hold or Home T oday is in operation. ■ Auto Recovery can be canceled manually if HOLD/ RETURN is pressed during ...
-
Climate Technology 43355 - page 34
34 OPERA TION SP AN Setting Mode Y our thermostat is set at the factory to cycle at 1˚F (0.5˚C) above and below the set temperature . (Span = 2) T his setting has been designed to pro- vide a comfortable room temperature under most all conditions . However , if you find your system cycling too fast or too slow , then the Span can be adjusted to m ...
-
Climate Technology 43355 - page 35
35 Backlighting (INDIGLO ® night-light) Y our thermostat has an electroluminescent lamp that backlights the display for easy viewing in the dark. When any k ey is pressed or the System Switch is changed, the display is illuminated. T he display will remain illuminated for 5 seconds after the last k ey is pressed. T his allows the light to stay on ...
-
Climate Technology 43355 - page 36
36 SAFETY FEA TURES Low Battery W ar ning ■ Y our thermostat has a two-stage low battery warning system. When the batteries are first detected to be weak, the first stage low battery warning is indicated by battery symbol flashing on the LCD display . At your earliest convenience , you need to replace the batteries with 2 new AA alkaline batterie ...
-
Climate Technology 43355 - page 37
37 Err or Mode ■ If the thermostat is unable to control your system due to an unex- pected battery problem, the thermostat will enter Error Mode . In this condition, the thermostat flashes “Err” on the LCD display , and shuts off your system. T o correct this problem, replace the batteries with 2 new AA alkaline batteries, even if you have re ...
-
Climate Technology 43355 - page 38
38 TROUBLESHOOTING Scrambled or Double Display (numbers over number s) No Display Entire Display Dims Program Does Not Change at your Desired Setting Auto / F an Does Not turn On Heating or Cooling Does Not Go On or Off Solution 1. Remove clear mylar stick er . 1. Check battery connections and batteries . 2. Press RESET button with a small pin and ...
-
Climate Technology 43355 - page 39
39 Problem (cont.) Solution (cont.) Erratic Display If unit continues to operate in the Off position Thermostat permanently reads “HI, ” “LO , ” or “ERR-” after pressing r eset button 1. Press the RESET button once with a small pin and hold for two seconds . The thermostat will need to be re-programmed. 1. Replace unit. 1. Replace unit. ...
-
Climate Technology 43355 - page 40
40 WIRING DIAGRAMS 4-wire Heat/Cool System 5-wire Heat/Cool System Jumper W allplate T erminals Fan Relay Cool Contactor Heat Relay or V alve 24V Supply Heat/Cool Rh Rc Y/O W/B Y1 G X X System Selector STD HP – No Jumper W allplate T erminals Fan Relay Cool 24V Supply Heat Relay or V alve Heat 24V Supply Rh Rc Y/O W/B Y1 G Cool Contactor X System ...
-
Climate Technology 43355 - page 41
41 Single-stage Heat Pump 2-wire Heat Only Jumper X OR Heat Mode Cool Mode Connect to Proper Reversing V alve T erminal. See T able A System Selector STD HP – W allplate T erminals Rh Y/ O W/ B Rc G Fan Relay Reversing V alve Compressor Contactor Y1 Heat Pump 24V Supply Jumper X X X W allplate T erminals Rh Rc Heat 24V or Millivolt Supply Heat Re ...
-
Climate Technology 43355 - page 42
42 WIRING DIAGRAMS 3-wire Heat Only Jumper X X W allplate T erminals Fan Relay Rh Rc Y/O W/B Y1 G Heat 24V Supply X Heat Relay or V alve System Selector STD HP – 3-wire Cool Only Rh Rc Y/O W/B Y1 G Jumper X X W allplate T erminals Cool Contactor Cool 24V Supply Fan Relay X System Selector STD HP – X - No Connection ...
-
Climate Technology 43355 - page 43
© 2003, Climate T echnology Corp Form No . 41645-01, 8/03 Climate T echnology Corp . 2500 FRISCO AVENUE MEMPHIS , TN 38114 A Hunter F an company ...
Haben Sie eine Frage bezüglich Climate Technology 43355?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Climate Technology 43355 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Climate Technology 43355 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.