-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 1
Safety Instructions & Operator’s Manual for EUROPEAN REAR ENGINE RIDING M OWER SERIES 23 MOD EL E251023BVE E281223BVE E281323BVE E331523KVE MODEL NUMBER EXPLA NA TION E 33 15 23 K V E EUROPEA N MODEL ENGINE OP T IONS CUTT ING WIDTH ENGINE T YPE ENGINE HP SERIES DESIGNATION E – European Model 25 – 25” Cutting Deck 28 - 28” Cutting Deck ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 2
2 IM PORTA NT SAFETY INSTRUCTIONS WARNING: This pow erful cut ting machine is cap able of amputat ing hands an d feet and can t hrow objects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons. The owner of the machine must understa ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 3
3 IM PORTA NT SAFETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 7. Keep people and pets out of mowing are a. Immediately STOP blades, STOP engine, a nd STOP mach ine if anyone enters t he area. 8. Check shields, deflect ors, switches, b lade controls an d other saf ety devices frequen tly for proper oper ation and location. 9. M ake ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 4
4 IM PORTA NT SAFETY INSTRUCTIONS MA INTENANCE 1. DO NOT store machine or fuel con tainer inside where fumes may reach an open f lame, spark or pilot ligh t such as in a w ater heater, furnace, clothes dry er or other ga s applianc e. A llow engine to cool before storing machine in a n enclosure. Sto re fuel contain er out of the reach of children ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 5
5 TA BLE OF CONTENTS IMPO RTANT SA FET Y INST RUCTIONS .........................................................................2-4 TABLE OF CONTENT S ...................................................................................................... 5 SECTION 1 - FA M ILIA RIZA T ION ............................................................. ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 6
6 Section 1 - FA MILIA RIZA TION FIGURE 1.1 1.1 INTRODUCT ION This manual has been prepared for the operator’s of the SNAPPER Rear Engine Rider. Its pur pose, aside fr om recom m ending standard operating pr ocedures and routine servic e requirem ents, is to prom ote SAFETY through the use of ac cepted operating practic es. Read, Understand a nd ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 7
7 Section 1 – FA MILIA RIZA TION – DECA LS / SYMBOLS BLA DE ENGA GED POSITIO N “ON” BLA DE DISEN GA GED POSITIO N “OFF” OFF ON STA RT ENGINE ENGINE SPEED CONT ROL SYMBOLS GUA RD W A RNING 29784 DO NOT operate without entire Grass Catcher or Guard in place SERI AL NUMBER EUROPEAN NOISE CONTROL 74135 EUROPEAN COMM UNITY 29776 WARNING ROTA ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 8
8 Section 1 – FA MILIA RIZA TION – DECA LS / SYMBOLS BA TTERY CAUT ION DECA L - 15691 A UTOM ATIC BLADE STOP DECA L - 24072 CLUTCH/BRA KE DECA L - 2-8514 DEFLE CTOR CAUT ION DECA L 29839 BA TTERY CAUT ION DECA L - 29947 BA TTERY STORAGE DECA L - 29948 SA FETY INSTRUCTION DECA L - 35974 HEIGHT OF CUT DECA L - 46218 TRACTION CLUTCH PA RK BRA KE L ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 9
9 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the f ollowing check s and perfor m the s ervice required bef ore each start- up. 2.1.1. Check tires and add or release air as needed to bring press ure to 12 PSI in front and 12 PSI in rear tires. 2.1.2. Check guards , deflector s and covers to m ake sure all are in plac e and sec ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 10
10 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION 2.3.1. ENGINE (E LECTRIC START) IMPO RTANT: W hen the ignition key is turned to “START ”, the engine will turn over, but will not start unless the Clutc h/Brake pedal is pressed all the way down, the Blade Lever is in the “Off ” position (See Figure 2.5).T he operator sho ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 11
11 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION 2.3.1. ENGINE (ELECTRIC STA RT) (Continued) 8. Should the battery be too weak to start the engine, Refer to Section “ENG INE (MANUAL ST ART) ” to manually start the electr ic start engines . 2.3.2. ENG INE (M A NUAL STA R T) IMPO RTANT: W hen the ignition ke y is turned to ? ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 12
12 Section 2 - OPERA TING INSTRUCTIONS WA RNING Once blade is dise ngaged, it should come to a complete stop in 3 seconds or less. If the blade continues to rotate afte r 3 seconds, the blade brake must be adjust ed. Refer to Sectio n “BLADE BRA KE A DJUST M ENT” f or adjustment procedures or retu rn machine to an authorized SNA PPER dealer f o ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 13
13 Section 2 - OPERA TING INSTRUCTIONS WA RNING DO NOT leave machine with engine running. Stop engine. Stop blade. Shift to neutral. Engage pa rking brake. Remove key. 2.4 S TOPPING - ENGINE, WHEEL DRIVE, BLA DE 2.4.1. ENGINE 1. Stop engine by turning k ey to the “OFF” position. See Figure 2.13. FIGURE 2.13 2.4.2. WHEEL DRIVE 1. Stop motion of ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 14
14 Section 2 - OPERA TING INSTRUCTIONS 2.4 S TOPPING - ENGINE, WHEEL DRIVE, BLA DE 2.4.4. PA RK BRA KE 1. Engage park brak e by pushing clutch/br ake pedal “DOW N” and m oving the park brake latc h to the “ENGAGED” position. W hile holding the park brak e latch “ENGAG ED”, release clutc h/brake pedal to s et park brake. See Figur e 2.16 ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 15
15 Section 2 - OPERA TING INSTRUCTIONS 2.6 REVERSE LOCKOUT M ECHA NISM Data indicates that tragic back -over accidents occur each year. These acc idents usually involve unsupervised c hildren. Many times these c hildren have been given r ides on the m achine and have been tr ained to view this potentially dangerous piece of m a chinery as fun rathe ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 16
16 Section 3 - MA INTENA NCE WA RNING DO NOT attempt any adjustment s, maintenance, service or repairs with the engine r unning. Stop engine. Stop blade. Eng age parking brake. Remov e key. Remove spark plu g wire f rom spark plug and secure aw ay from plug. Engine and components are HOT. A v oid serious burns, allow all parts to c ool before worki ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 17
17 Section 3 - MA INTENA NCE WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool before wo rking ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 18
18 Section 3 - MA INTENA NCE 3.2.7. INTERLO CK SY STEM Check interlock controls f or proper f unction: The en gine M UST NOT start if : 1. Blade Control is “ON” and/or clutch/brak e pedal is released. The engine and blades MUST STOP if: 2. The oper ator leaves the operator pos ition with Blade Control “O N” and/or clutc h/brake pedal is rel ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 19
19 Section 3 - MA INTENA NCE 3.3 S ERVICE - EV ERY 25 OPERA T ING HOURS (Continued from previous page ) 3.3.2. B A T TERY FLUID LEVEL 1. Remove batter y . Ref er to Section “BAT TERY REMOVAL”. 2. Remove battery caps. Check fluid level. 3. Add water only to bring f luid to proper level – DO NOT OVERFILL. 4. Reinstall battery. Refer to Section ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 20
20 Section 3 - MA INTENA NCE WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool before wo rking ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 21
21 Section 3 - MA INTENA NCE WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool before wo rking ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 22
22 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool be ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 23
23 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug. E ngine and components are HOT. Avoid serious burns; allow all parts to cool bef ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 24
24 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool be ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 25
25 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, main tenance, service or repairs with the engine r unning. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from sp ark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool b ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 26
26 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool be ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 27
27 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool be ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 28
28 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool be ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 29
29 Section 4 - A DJUSTMENTS & REPA IR WA RNING The elect rolyte (acid) prod uces a highly explosiv e gas. Keep all sparks, flame and fire away from area w hen charging battery or when handling electroly te or battery . Electroly te (acid) is a highly c orrosive liquid. Wear eye protection . Wash affect ed areas immediately after hav ing eye or ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 30
30 Section 4 - A DJUSTMENTS & REPA IR 4.6.6. BA T TERY T ESTING Battery Condition Chart State of Charge Syr inge Hydr ome ter Digital Voltmeter Five Ball Hydrometer 100% Charged w/ Sulfate Stop 1.280 12.80v Five Balls Floating 100% Charged 1.265 12.60v Four Balls F loating 75% Charged 1.210 12.40v Three Balls Floating 50% Charged 1.160 12.10v T ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 31
31 TROUBLESHOOTING PROBL EM PROBABLE CA USE CORRECTIVE A CT ION Engine Will Not 1 . F u e l t a nk em p t y. 1. Fill fuel tank with fresh f uel to proper level. Start Using 2. Engine needs chok ing. 2. Move chok e control to “CHOKE” position. Recoil Starter 3. Spark plug wire disconnec ted. 3. Place spark plug wire onto spark plug. 4. Faulty pa ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 32
32 TROUBLESHOOTING PROBLEM PR OBA BLE CA USE CORRECTIVE A CT ION Rider Will Not M ove 1. Drive disc worn or damaged. 1. Replace drive disc . Loss Of T raction 2. Rubber drive disc is not track ing properly on drive disc . 2. Adjust r ubber drive disc. 3. Tapered ax le bolt and nut mis sing. 3. Replace with SNA PPER tapered bolt & nut. 4. Axle b ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 33
33 MAINTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PA G ES EA CH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS E A CH SEA SON Engine Check Oil Lev el Page 9 X Engine Initial Oil Change Page 16 X Engine Periodic Oil Cha nge Page 18 X* A ir Pre-Cleaner Service Sponge Pr e- Cleaner Element Engine Manual X** A ir Clean er Replace Elemen t Eng ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 34
34 MAINTENA NCE/REPLA CEM ENT PA RTS MAINTENA NCE PA RTS Engine Speed Control ( Briggs Engin e) 2-4155 Engine Speed Control ( Kohler Engin e) 7-4320 Clutch/Brake Cable ( 25, 28” Deck Mo dels) 2-9913 Clutch/Brake Cable ( 33” Deck Mo dels) 7-4131 Brake Cable 7-2648 25” Cutter Blad e (Standard - Not A ir Lif t Compatible) 3- 5619 25” Cutter Bl ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 35
35 2 YEA R LIMITED W A RRANTY For two (2) years from purchase date for the or iginal purchaser's residential, non-com mercial use, SNAPPER , through any authorized SNA PPER dealer will replace, fr ee of c harge (exc ept for taxes where applic able), any part or parts found upon exam ination by the factor y at Mc Donough, Georgia, to be defec t ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 36
36 NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ _ ...
-
Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE - page 37
37 Safety Instructions & Operator’s Manual for EUROPEAN REAR ENGINE RIDING M OWER SERIES 23 IMPORTANT Snapper products are built using engines that meet or exceed all a pplicable emissions requirements on the date manufactured. The labels on thos e engines conta in very impor tant emissions infor mation and critica l safety warnings. Read, Un ...
Haben Sie eine Frage bezüglich Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Snapper E251023BVE, E281223BVE, E281323BVE, E331523KVE hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.