Bedienungsanleitung Husqvarna 371K

24 Seiten 0.62 mb
Download

Zur Seite of 24

Summary
  • Husqvarna 371K - page 1

    371K 101 91 78-95 Read these instructions carefully and make sure you understand them before using the machine. Operator ’ s Manual (EP A) ...

  • Husqvarna 371K - page 2

    2 – English WARNING! The power cutter can be dangerous! Careless and incorrect use can result in serious or fatal injury to the operator or others. SYMBOL EXPLANA TION Symbols on the power cutter: Please read the instructions carefully and make sure you understand them before using the power cutter. Always wear: • Approved protective helmet • ...

  • Husqvarna 371K - page 3

    English – 3 CONTENTS List of Contents Symbol explanation ..................................................... 2 Safety instructions Personal protective equipment ....................................... 4 The power cutter ’ s safety equipment ...................... 4 Control, maintenance and service of the machine ‘ s safety equipment ....... ...

  • Husqvarna 371K - page 4

    4 – English ! SAFETY INSTRUCTIONS ! ! THE POWER CUTTER ’ S SAFETY EQUIPMENT This section describes the power cutter ’ s safety equipment, its function and how checks and maintenance are carried out to ensure that it operates correctly. (See the chapter “What is what“ to locate where this equipment is positioned on your power cutter.) WARN ...

  • Husqvarna 371K - page 5

    English – 5 The muffler is designed to give the lowest possible noise level and to direct the engine ‘ s exhaust fumes away from the user. The engine ‘ s exhaust fumes are hot and can contain sparks, which can lead to the outbreak of fire. ! Control, maintenance and service of the machine ‘ s safety equipment WARNING! All service and repair ...

  • Husqvarna 371K - page 6

    6 – English 3 Muffler Never use a machine that has a defective muffler. Check regularly that the muffler is secured to the engine body. SAFETY INSTRUCTIONS GENERAL SAFETY INSTRUCTIONS IMPORTANT INFORMATION! Do not use the power cutter until you have read the entire contents of this Operator ’ s Manual. All servicing, in addition to the points l ...

  • Husqvarna 371K - page 7

    English – 7 SAFETY INSTRUCTIONS ! Fuel safety (Filling/Fuel mixture/Storage) WARNING! Exercise great care when handling fuel. Bear in mind the risk of fire, explosions and inhaling fumes. • Never fill the machine while the engine is running. • Provide good ventilation when filling or mixing fuel (petrol and 2-stroke oil). • Move the machine ...

  • Husqvarna 371K - page 8

    8 – English SAFETY INSTRUCTIONS ! Over exposure to vibrations can result in blood-vessel or nerve injury to persons suffering with blood circulation problems. Seek medical attention if you experience physical symptoms that can be related to over exposure to vibrations. Examples of such symptoms are numbness, lack of feeling, “ tickling “ , ? ...

  • Husqvarna 371K - page 9

    English – 9 SAFETY INSTRUCTIONS Pull in Pull in occurs when the lower part of the blade is suddenly stopped or when the cut closes. (To avoid this see the section ” How to avoid kickback ” and ” Pinching/rotation ” below). Pinching/rotation Pinching occurs when the cut closes. The power cutter can be drawn suddenly and powerfully downward ...

  • Husqvarna 371K - page 10

    10 – English SAFETY INSTRUCTIONS CUTTING BLADES Abrasive blades The cutting material in an abrasive blade consists of abrasive corn that is held together by an organic bonding agent. ” Reinforced blades ” are made up of a fabric or fibre base that prevents total breakage at maximum working speed if the blade should be cracked or damaged. (The ...

  • Husqvarna 371K - page 11

    English – 11 SAFETY INSTRUCTIONS Cutting blades Type of cutting blades Check that the blade is approved for the same or higher speed according to the aproval plate of the engine. Do not exceed the maximum working speed stated on the blade. Damage • Ensure the blade it not cracked or damaged in any other way. • Test the blade by hitting it gen ...

  • Husqvarna 371K - page 12

    12 – English WHA T IS WHA T? 1. Cylinder cover 2. Muffler 3. Fuel tank 4. Rear handle 5. Choke 6. Throttle catch 7. Stop switch 8. Cutting head 9. Cutting arm 10. Belt tensioning screw 11. Cutting blade What is what on a power cutter? 12. Throttle 13. Combination spanner 14. Air filter cover 15. Blade guard 16. Starter handle 17. Operator ’ s m ...

  • Husqvarna 371K - page 13

    English – 13 Fitting the cutting blade Husqvarna cutting blades are manufactured and approved for freehand cutting. The paper labels on each side of the blade are there to distribute the pressure from the flange washer and prevent the blade from slipping. The blade is placed between the flange hub (A) and the flange washer (B). The flange washer ...

  • Husqvarna 371K - page 14

    14 – English FUEL HANDLING ! Fuelling WARNING!The following precautions reduce the risk of fire: • Do not smoke or place any sources of heat in the vicinity of the fuel. • Never refuel when the engine is running. • Open the fuel cap slowly when fuelling so that any over pressure is released slowly. • Tighten the fuel cap carefully after r ...

  • Husqvarna 371K - page 15

    English – 15 Start and stop WARNING! Before starting observe the following: • Do not start the power cut without the cutting arm or cutting head fitted. Otherwise the clutch can come loose and cause personal injury. • Always move the power cutter from the filling area before starting. • Ensure that you and the machine stand firmly and that ...

  • Husqvarna 371K - page 16

    16 – English Adjusting the drive belt • The drive belt is fully enclosed and well protected from dust, dirt and mechanical effects during the cutting process. • To tension the drive belt, slightly loosen the bolts (A), which secure the cutting head and belt guard. • Turn the tensioning screw so that the nut (B) is located directly under the ...

  • Husqvarna 371K - page 17

    English – 17 MAINTENANCE Carburetor Your Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After your unit has been run 8-10 tanks of fuel the engine has broken in. To ensure that your unit is at peak performance and producing the least amount of harmful emissions after break in, have your autho ...

  • Husqvarna 371K - page 18

    18 – English Air filter The air filter should be cleaned regularly removing dust and dirt to avoid: • Carburettor malfunction • Starting problems • Reduced engine power • Unnecessary wear to engine parts The air filter system consists of a pre-filter (1) and a main filter (2): 1) The pre-filter is an oiled foam filter that is easily acces ...

  • Husqvarna 371K - page 19

    English – 19 Replacing a broken or worn starter cord • Loosen the bolts that hold the starter against the crankcase and lift off the starter unit. • Pull out the cord approx. 30 cm and lift it out of the cut- out in the starter-pulley ’ s periphery. Reset the recoil spring by allowing the pulley to slowly rotate backwards. • Loosen the sc ...

  • Husqvarna 371K - page 20

    20 – English MAINTENANCE Spark plug The condition of the spark plug is affected by: • An incorrect carburettor setting. • An incorrect fuel mixture (too much oil). • A dirty air filter. These factors cause deposits on the spark plug electrode that may result in malfunction or starting difficulties. • If the machine is low on power, diffic ...

  • Husqvarna 371K - page 21

    English – 21 MAINTENANCE Below follows some general maintenance instructions. If you need further information please contact your service workshop. W eekly maintenance 9. Check the main filter. 10. Check that the handles and anti-vibration elements are not damaged. 11. Clean the spark plug. Check that the electrode gap is 0.5 mm. 12. Clean the co ...

  • Husqvarna 371K - page 22

    22 – English TECHNICAL DA T A Engine Cylinder volume, cu.in/cm 3 Cylinder bore, inch/mm Stroke, inch/mm Idle speed, rpm Max. speed, unloaded, rpm Power, kW Ignition system Manufacturer Type of ignition system Spark plug Electrode gap, inch/mm Fuel and lubrication system Manufacturer Carburettor type Fuel capacity, US pint/litre Weight Without fue ...

  • Husqvarna 371K - page 23

    English – 23 FEDERAL EMISSION CONTROL W ARRANTY ST A TEMENT Husqvarna Forest & Garden servicing dealer. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna Forest & Garden at 1-800 487 5963 . WARRANTY PERIOD Any warranted part which is ...

  • Husqvarna 371K - page 24

    ´*31y¶5U¨ 2000W51 ...

Produzent Husqvarna Kategorie Brush Cutter

Dokumente, die wir vom Produzenten des Geräts Husqvarna 371K erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Husqvarna
- Bedienungsanleitungen 371K
- Produktkarten Husqvarna
- Informationsbroschüren
- oder Energieetiketten Husqvarna 371K
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Husqvarna 371K.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Husqvarna 371K, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Husqvarna 371K. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Husqvarna 371K ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Husqvarna 371K, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Husqvarna 371K hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Husqvarna 371K verständlich ist.

Eine gänzliche Bedienungsanleitung von Husqvarna sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Husqvarna 371K bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Husqvarna 371K befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Husqvarna 371K, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Husqvarna 371K - die uns die ersten Schritte während der Nutzung von Husqvarna 371K erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Husqvarna 371K hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Husqvarna 371K im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Husqvarna 371K?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Husqvarna 371K nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Husqvarna 371K hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)