-
Hobart HR5 - page 1
– 1 – HR5 & HR7 ROTISSERIE OVENS & HW5 & HW7 W ARMERS MODELS HR5 auto. controls ML-126454 ML-126727 prog. controls ML-126456 ML-126728 HR7 auto. controls ML-126455 ML-126725 prog. controls ML-126457 ML-126726 HW5 ML-126207 HW7 ML-126208 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 34046 Rev. B (7-99) HR5 Oven/ HW5 Warmer N S T R U ...
-
Hobart HR5 - page 2
– 2 – © HOBART CORPORATION, 1999 T ABLE OF CONTENTS MODELS ............................................................................................................................................... 4 GENERAL .................................................................................................................................... ...
-
Hobart HR5 - page 3
– 3 – Automatic Controls ....................................................................................................................... 21 Setting the Temperature ........................................................................................................ 21 Setting the Roasting Time ........................................ ...
-
Hobart HR5 - page 4
– 4 – Model HR5 Oven Model HW5 Warmer Model HR5 Oven/HW5 Warmer Model HR7 Oven Model HW7 Warmer Model HR7 Oven/HW7 Warmer • Rotisserie Ovens with Programmable Controls shown; Meat probe not shown. ...
-
Hobart HR5 - page 5
– 5 – Installation, Operation and Care of HR SERIES ROTISSERIE OVENS AND HW SERIES ROTISSERIE W ARMERS PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE GENERAL The Hobart HR Series Rotisserie Ovens and HW Series Rotisserie Warmers feature full view tempered glass doors, both front and back, and quartz lighting that promotes visual appeal and stimul ...
-
Hobart HR5 - page 6
– 6 – OVENS There are two types of oven control operations: • Programmable with Manual control operation • Automatic with Manual control operation When you purchase your rotisserie oven you have the option of ordering the rotor, drip plates, and some accessories with either a nonstick coated surface or stainless steel surface. Refer to the ...
-
Hobart HR5 - page 7
– 7 – INST ALLA TION Immediately after unpacking the oven, check for possible shipping damage. If oven is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery. Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine data pla ...
-
Hobart HR5 - page 8
– 8 – Assembling the Rotor (HR7 only) You should have: (2) rotor end plates; (1) rotor shaft; (12) screws 1. Face the two rotor end plates against each other to make sure the holes match. This is done to ensure you have a matched set of rotor end plates. If holes do not match, the accessories will not align properly. 2. Align the holes on the l ...
-
Hobart HR5 - page 9
– 9 – 7. Place the assembled rotor in the oven. 8. Turn Rotisserie dial to to rotate rotor. 9. Turn Rotisserie dial to "0/P" to stop rotation when the hole pattern (Fig. 4) is located at the bottom of the oven. 10. Verify that the hole pattern is identical to the top illustrated hole pattern shown in Fig. 4. 11. If hole pattern does n ...
-
Hobart HR5 - page 10
– 10 – ELECTRICAL CONNECTIONS WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT. WARNING: APPLIANCES EQUIP ...
-
Hobart HR5 - page 11
– 11 – ELECTRICAL DATA MODEL VOLTS HERTZ PHASE CIRCUIT SIZE* (AMPS) HR5 208 60 1 35 208 60 3 20 240 60 1 35 240 60 3 20 HR7 208 60 1 60 208 60 3 35 240 60 1 60 240 60 3 35 HW5 208 60 1 15 208 60 3 10 240 60 1 15 240 60 3 10 HW7 208 60 1 15 208 60 3 15 240 60 1 20 240 60 3 15 STACKED MODELS (2) HR5 208 60 1 70 208 60 3 40 240 60 1 70 240 60 3 45 ...
-
Hobart HR5 - page 12
– 12 – BEFORE FIRST USE WARNING : DISCONNECT ELECTRICAL POWER BEFORE CLEANING. Oven must be "burned in" to release any odors that might result from heating the new oven surfaces. 1. Clean oven, accessories, and warmer (if present), both inside and outside, with warm soapy water. Refer to "Cleaning" in this manual for further ...
-
Hobart HR5 - page 13
– 13 – PROGRAMMABLE OVEN CONTROL PANEL WITH MANUAL CONTROLS (Fig. 5) Display Shows temperature (°F) and time (HH:MM) when first turned on. Colon flashes, remaining cooking time shows. Programmable Controls Set all control dials to "P". See pages 15-18. Manual Controls Use control dials. See page 14. DISPLA Y PROGRAMMABLE CONTROLS THE ...
-
Hobart HR5 - page 14
– 14 – MANUAL CONTROLS (Fig. 5) Use control dials on the Programmable Control Panel. Thermostat Dial 0°F – Heat is OFF. Temperature settings – 150°F - 480°F (66°C - 249°C). Rotisserie Dial "0/P" – Rotisserie is OFF or in Programming Mode. – Oven operates without restrictions. – Customer heating lamp remains on, operator ...
-
Hobart HR5 - page 15
– 15 – PROGRAMMABLE CONTROLS (Fig. 6) All programming must be done with all dials in the "P" position (Thermostat , Rotisseries, and Main Power dials). If all dials are not set to "P", the manual controls override the programmable controls. The programmable control allows you to program three different functions for each of ...
-
Hobart HR5 - page 16
– 16 – Programming Menu Buttons 1. Before entering the program mode, you must first press a Menu Button. Press Menu Button #1. Its LED will light. 2. To enter Program mode, press and hold both and simultaneously until time display shows "PROG" (approximately 2 seconds). The LED on Menu Button #1 and Cooking Process Indicator will star ...
-
Hobart HR5 - page 17
– 17 – Starting a Processing Cycle 1. Press desired Menu Button (its LED will light). 2. Press (its LED will light). • Time display will show total processing time and will count down to the end of the processing cycle. • Temperature display will show pht (preheat) until oven cavity temperature reaches 125°F (52°C). Then it will show the ...
-
Hobart HR5 - page 18
– 18 – Turning the Buzzer Off Press . Setting the End Time (Delayed Start) Assume roasting time is one hour and fifteen minutes and it is currently 2 o'clock. If you want to finish roasting at 4:00, program as follows: 1. Press and hold while pressing or to adjust the time to 4:00. • Colon in display will flash. • Time display will sho ...
-
Hobart HR5 - page 19
– 19 – AUTOMATIC OVEN CONTROL PANEL WITH MANUAL CONTROLS (Fig. 7) Display Shows temperature (°F) and time (HH:MM) when first turned on. Colon flashes, remaining cooking time shows. Automatic Controls Set all control dials to "P". See pages 21-23. Manual Controls Use control dials. See page 20. DISPLA Y THERMOST A T DIAL RO TISSERIE D ...
-
Hobart HR5 - page 20
– 20 – MANUAL CONTROLS (Fig. 7) Use control dials on the Automatic Control Panel. Thermostat Dial 0°F – Heat is OFF. Temperature settings – 150°F - 480°F (66°C - 249°C). Rotisserie Dial "0/P" – Rotisserie is OFF or in Automatic Mode. – Oven operates without restrictions. – Customer heating lamp remains on, operator heat ...
-
Hobart HR5 - page 21
– 21 – AUTOMATIC CONTROLS (Fig. 8) Fig. 8 Automatic Controls can regulate roasting temperature, stop cooking at a preset time, or allow buzzer to be timed. If no temperature or roasting time has been programmed, the Automatic Control recalls the values for the previous Automatic Cooking Operation. The last entered temperature and roasting time ...
-
Hobart HR5 - page 22
– 22 – Setting an Early Warning Buzzer Assume roasting time is one hour and fifteen minutes and it is currently 2 o’clock. The cycle completes and the buzzer will sound at 3:15. If you want an early warning buzzer for basting or whatever reason, program as follows: DISPLAY TIME Press 3:15 — Displays the sum of the current time plus the roas ...
-
Hobart HR5 - page 23
– 23 – Stopping an Automatic Cooking Operation When an Automatic Cooking Operation is completed, a buzzer sounds. If you want to temporarily interrupt an Automatic Cooking Operation, see above. If you want to abort an Automatic Cooking Operation, turn Main Power dial to "0". • Temperature and Roasting Time remains in memory, not the ...
-
Hobart HR5 - page 24
– 24 – PREPARING THE PRODUCT • Oven is not designed to roast frozen foods. • Use only fresh or previously thawed product. • Clean all work areas before and after preparing poultry. • Maintain proper sanitation at all times. LOADING PRODUCTS ONTO ACCESSORIES Make sure the product weight is evenly balanced on the accessory. To load a chic ...
-
Hobart HR5 - page 25
– 25 – Fork Spit (Optional) Skewer spits into whole poultry so that point goes through the chest and thighs (Fig. 11). • Leave approximately 1 ⁄ 2 " (1.2 cm) between each chicken to permit proper browning. Fig. 11 Turkey Spit (Optional) You must remove the rotor assembly from the oven and replace it with the turkey spit to roast one wh ...
-
Hobart HR5 - page 26
– 26 – 2. Make sure the product is not sticking out of the rack rods. Shown below is a 3 rack chicken rack (Fig. 14). Four rack and 5 rack chicken racks are also available as an option. Fig. 14 Loading Products in a Basket (Optional) Load the chickens, breast up, in the basket (Fig. 15 & 16). Fig. 15 Fig. 16 PL-41369-1 3 RACK CHICKEN RACK L ...
-
Hobart HR5 - page 27
– 27 – LOADING ACCESSORIES INTO THE OVEN If you are loading an HR5, skip steps 2-7. 1. Turn Main Power dial to . 2. Turn Rotisserie dial to to rotate rotor. 3. Turn Rotisserie dial to "0/P" to stop rotation when the hole pattern (Fig. 17) is located at the bottom of the oven. 4. Verify that the hole pattern is identical to the top ill ...
-
Hobart HR5 - page 28
– 28 – Loading Spits Into Oven 1. Place the skewer into the small outside hole on the rotor end plate on your left (as you face the oven). The back of the V-shape spit should be pointing towards you (Fig.18). HR7 Fig. 18 2. Fit the other end on the spit into the small corresponding holes on the rotor end plate on your right (as you face the ove ...
-
Hobart HR5 - page 29
– 29 – Loading Racks, Baskets, or Baking Plate Into Oven A Chicken Rack, Basket, and Baking Plate all load the same. Loading a basket is shown (Fig. 20). 1. Place one end of the accessory into the a rotor end plate. 2. Place the other end of the accessory into the corresponding hole on the other rotor end plate. Make sure the accessory is level ...
-
Hobart HR5 - page 30
– 30 – SUGGESTED ROASTING GUIDELINES The chart indicates suggested cooking times and temperatures. Initial product temperature, size, shape, and other factors may require adjustment to suit your operation. Internal Capacity Thermostat Time Temperature Product (°F) (°C) (HH:MM) (°F) (°C) HR5 HR7 Chicken, Whole, 350-275 177-135 1:10 - 1:30 18 ...
-
Hobart HR5 - page 31
– 31 – EMPTYING GREASE DRAWER Empty the grease drawer when necessary. • Be careful if grease is warm. 1. Open door and slide grease drawer out about 5" (13 cm) (Fig. 21). 2. Provide a suitably large bucket or vessel under drain valve and open valve handle (Fig. 21). 3. Close drain valve when empty (Fig. 22). 4. Slide grease drawer shut. ...
-
Hobart HR5 - page 32
– 32 – WARMER CONTROLS (Fig. 23) Fig. 23 Thermometer — Displays temperature in degrees Fahrenheit. Thermostat — 0°F is OFF. Turn dial to desired temperature. USING WARMERS (Models HW5 and HW7) Fill warmer drawer with cold water about three-quarters full to minimize steaming. • Use softened water , if available, to reduce lime build-up in ...
-
Hobart HR5 - page 33
– 33 – CLEANING WARNING : DISCONNECT ELECTRICAL POWER BEFORE CLEANING. Proper cleaning prolongs the life and productivity of the oven. The oven should be routinely cleaned throughout the day and thoroughly cleaned at the end of the day. Allow oven to cool before cleaning. CAUTION: Do not use oven cleaners. Do not clean with a high pressure hose ...
-
Hobart HR5 - page 34
– 34 – How To Clean Nonstick Coated Surfaces (Routine Cleaning) This should be done at the end of each cook cycle. CAUTION: Cleaning should not be delayed beyond 8 hours of service. 1. Use a mild dish washing soap in warm water to remove grease and food residue immediately after the coated component has cooled. 2. Rinse with clean water and let ...
-
Hobart HR5 - page 35
– 35 – CLEANING GREASE DRAWER 1. Empty grease drawer (see page 31). 2. Remove drawer when machine is idle. 3. Wash in a sink with warm soapy water. • Any hard soil can be scrubbed with a soft, non-scratching pad. 4. Rinse and wipe dry with a soft clean cloth. 5. Return clean drawer. CLEANING WARMERS 1. Remove water drawer and shelves. 2. Wash ...
-
Hobart HR5 - page 36
– 36 – MAINTENANCE WARNING : DISCONNECT ELECTRICAL POWER SUPPLY BEFORE PERFORMING ANY MAINTENANCE. WARNING : HOT GLASS, GREASE, AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING AND SERVICING THE OVEN. MODEL HR5 OVEN ONLY Should the rotisserie become out of alignment, use the allen key to unscrew and retighten the drum on the rotor shaft until ...
Haben Sie eine Frage bezüglich Hobart HR5?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Hobart HR5 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Hobart HR5 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.