-
Invacare Pronto M91 Base - page 1
Owner’s Operator and Maintenance Manual DEALER: This manual MUST be given to the user of the wheelchair. USER: BEFORE using this wheelchair, read this manual and save for future reference. For more information regarding Invacare products, parts, and services, please visit www.invacare.com Pronto ® M91 ™ Base with SureStep ® ...
-
Invacare Pronto M91 Base - page 2
REFERENCE DOCUMENTS Pronto® M91™Base with SureStep® 2 Part No 1143153 WARNING A qualified technician MUST pe rform the initial se t up of this wheelchair. Also, a qualified technician MUST perform al l procedures in the service manual. DO NOT use this product or any availa ble option al equipmen t without fir st completely reading and under ...
-
Invacare Pronto M91 Base - page 3
TABLE OF CONTENTS Part No 1143153 3 Pronto® M91™Base with SureStep® TABLE OF CONTENTS REFERENCE DOCUMENTS ................................................................. 2 REGISTER YOUR PR ODUCT ............................................................... 6 SPECIAL NOTES ..................................................................... ...
-
Invacare Pronto M91 Base - page 4
TABLE OF CONTENTS Pronto® M91™Base with SureStep® 4 Part No 1143153 TABLE OF CONTENTS Safety Inspection Checklis ts ................... ............................................. .................. .................................26 Inspect/Adjust Initially ... ................................................................... ............ ...
-
Invacare Pronto M91 Base - page 5
TABLE OF CONTENTS Part No 1143153 5 Pronto® M91™Base with SureStep® TABLE OF CONTENTS Disconnecting/Connecting the Joysticks .. ................................................................... .................... ....44 SPJ+ Joysticks .................. ............................................. .................................... ..... ...
-
Invacare Pronto M91 Base - page 6
TABLE OF CONTENTS Pronto® M91™Base with SureStep® 6 Part No 1143153 TABLE OF CONTENTS When to Charge Batteries .......................... ............................................. .................. .............. ..............62 SPJ+ Joysticks .................. ............................................. ............................... ...
-
Invacare Pronto M91 Base - page 7
SPECIAL NOTES Part No 1143153 7 Pronto® M91™Base with SureStep® SPECIAL NOTES Signal words are use d in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage. Refer to the table belo ...
-
Invacare Pronto M91 Base - page 8
SPECIAL NOTES Pronto® M91™Base with SureStep® 8 Part No 1143153 WARNINGS The seat positioning strap is a positioning be lt only. It is not d esigned for use as a safety device withstanding hi gh stress loads such as auto or aircraft safety belts. If signs of wear appear , belt must be replaced IMMEDIATELY. POWERED SEATING SYSTEMS ONLY - Thi ...
-
Invacare Pronto M91 Base - page 9
LABEL LOCATIONS Part No 1143153 9 Pronto® M91™Base with SureStep® LABEL LOCATIONS M91 Standard NOTE: The serial numbe r label is located on the inside of the right rear frame. ...
-
Invacare Pronto M91 Base - page 10
LABEL LOCATIONS Pronto® M91™Base with SureStep® 10 Part No 1143153 M91 Heavy Duty NOTE: The serial number label is located on the inside of the right rea r frame. ...
-
Invacare Pronto M91 Base - page 11
LABEL LOCATIONS Part No 1143153 11 Pronto® M91™Base with SureStep® Wheelchairs With TRRO Wheelchairs Without TRRO NOTE: Also on opposite side. NOTE: Also on opposite side. NOTE: Also on opposite side. NOTE: Auto style seat positioning strap shown. This label is ...
-
Invacare Pronto M91 Base - page 12
TYPICAL PRODUCT PARAMETERS Pronto® M91™Base with SureStep® 12 Part No 1143153 TYPICAL PRODUCT PARAMETERS Pronto M91 NOTE: Based on 18 ‐ inch deep Va n seat. *NOTE: Va l u e s for range are calculated for maximum chair weight rating using lar gest batteries applica ...
-
Invacare Pronto M91 Base - page 13
SECTION 1—GENERAL GUIDELINES Part No 1143153 13 Pronto® M91™Base with SureStep® SECTION 1—GENERAL GUIDELINES WARNING SECTION 1 - GENERAL GUIDELIN ES contai ns important inform ation for the safe operation and use of this product. Controller Settings/Repair or Service Set ‐ up of the Electronic Control Unit is ? ...
-
Invacare Pronto M91 Base - page 14
SECTION 1—GENERAL GUIDELINES Pronto® M91™Base with SureStep® 14 Part No 1143153 DO NOT make sharp turns in the forw ard or reverse direction at excessiv e speed. Fai lure to observe this w arning can cause the wheelchair to ti p over and ? ...
-
Invacare Pronto M91 Base - page 15
SECTION 1—GENERAL GUIDELINES Part No 1143153 15 Pronto® M91™Base with SureStep® Make sure detent balls of the quick ‐ release pin are fully released before operating the wheelchair . Keep detent balls clean. When determining the depth of the telescop ...
-
Invacare Pronto M91 Base - page 16
SECTION 1—GENERAL GUIDELINES Pronto® M91™Base with SureStep® 16 Part No 1143153 Charging Batteries DANGER When using an extension cord , use only a three wire extension cord having at least 16 AWG (American Wire Gauge) wire and the same or high er electrical rating as the devise being c onnected. Use of improper extension cord could r esu ...
-
Invacare Pronto M91 Base - page 17
SECTION 1—GENERAL GUIDELINES Part No 1143153 17 Pronto® M91™Base with SureStep® Rain Test Inv acare has tested its pow er wheelchairs in accordance with ISO 7176 “Rain Te s t . ” This provides the end user or his/her assistant sufficient time to ? ...
-
Invacare Pronto M91 Base - page 18
SECTION 2—EMI INFORMATION Pronto® M91™Base with SureStep® 18 Part No 1143153 SECTION 2—EMI INFORMATION WARNING CAUTION: IT IS VERY IMPORTANT THAT YOU READ THIS INF ORMATION REGARDING THE POSSIBLE E FFECTS OF ELECTROMAGNETIC INTERFERENCE ON YOUR POWERED WHEELCHAIR. Electromagnetic Interference (E MI) From Radio Wave Sources Powered wheel ...
-
Invacare Pronto M91 Base - page 19
SECTION 2—EMI INFORMATION Part No 1143153 19 Pronto® M91™Base with SureStep® WARNING Powered Wheelchair Electrom agnetic Interference (EMI) Because EM energy rapidly becomes more intense as one moves closer to the transmitting antenna (source), the EM fi elds from hand-hel d radio wave sources (transceivers) are of special concern. It is ...
-
Invacare Pronto M91 Base - page 20
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Pronto® M91™Base with SureStep® 20 Part No 1143153 SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS “Safety and Handling” of the wheelchair requires the close atte ntion of the wheelchair user as wel l as the assistant. Th is ...
-
Invacare Pronto M91 Base - page 21
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Part No 1143153 21 Pronto® M91™Base with SureStep® WARNING Many activities requir e the wheelchair user to re ach, bend and tr ansfer in and out of the wheelchair. These moveme nts will cause a change to the normal balance, center of gravity, and weight distribu tion of the wheelcha ir. To determin ...
-
Invacare Pronto M91 Base - page 22
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Pronto® M91™Base with SureStep® 22 Part No 1143153 Pinch Points WARNING Pinch point may occur when returning the tilted seat to the full upright position. Make sure the hands and body of the occupant, attendants and bystanders are clear of all pinch points before lowering seat (FIGURE 3.2). DO NOT ...
-
Invacare Pronto M91 Base - page 23
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Part No 1143153 23 Pronto® M91™Base with SureStep® Lifting/Stairways WARNING DO NOT attempt to move an occupied power wheelcha ir between floors using a stairway. Use an elevator to move an occupied power wh eelchair between floors. If moving a power wheelchair between floors by means of a stairway ...
-
Invacare Pronto M91 Base - page 24
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Pronto® M91™Base with SureStep® 24 Part No 1143153 Transferring To and From Other Seats WARNING ALWAYS turn the wheelchair power Off and engage the motor release levers to prevent the wheels from moving before attempting to tr ansfer in or out of the wheelchair. Also, make sure every precau tion i ...
-
Invacare Pronto M91 Base - page 25
SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS Part No 1143153 25 Pronto® M91™Base with SureStep® Reaching, Leanin g and Bending - Forward WARNING DO NOT attempt to reach object s if you have to move fo rward in the seat or pick them up from the floor by reac hing down between your knees. NOTE: For this proced ure, refe r ? ...
-
Invacare Pronto M91 Base - page 26
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Pronto® M91™Base with SureStep® 26 Part No 1143153 SECTION 4—SAFETY INSPECTION/ TROUBLESHOOTING NOTE: Every six months or as necessary take your wheelchair to a qualifie d dealer for a thor ough inspection and servicing. ? ...
-
Invacare Pronto M91 Base - page 27
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Part No 1143153 27 Pronto® M91™Base with SureStep® Inspect/Adjust Weekly ❑ Ensure seat is secured to wheelchair frame. ❑ Ensure seat and/or back upholstery hav e no rips and do not sag. Replace if necessary . ❑ Ens ...
-
Invacare Pronto M91 Base - page 28
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Pronto® M91™Base with SureStep® 28 Part No 1143153 ❑ Inspect and clean the stability lock gears. Replace if w orn. ❑ Clean upholstery and armrests. ❑ Inspect charger AC power cord for damage. Replace if necessa ...
-
Invacare Pronto M91 Base - page 29
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Part No 1143153 29 Pronto® M91™Base with SureStep® Information Gauge Display Diagnostics Service Indicator Light Diagnostics DISPLAY DESCRIPTION DEFINITION COMMENTS All LEDs are off. Power is off. All LEDs are on. Power is on. Fewer than three LEDs on implies reduced battery charge. Left RED LED is ...
-
Invacare Pronto M91 Base - page 30
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Pronto® M91™Base with SureStep® 30 Part No 1143153 MPJ+, PSR+, PSF+ Joysticks or Displays SYMPTOM PROBABLE CAUSE SOLUTIONS SPM L Park Brake Fault or SPM R Park Brake Fault displays and wheelchair does not drive. Motor lock levers disengaged (Error code E9 or E10). Engage motor lock levers. R ...
-
Invacare Pronto M91 Base - page 31
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING Part No 1143153 31 Pronto® M91™Base with SureStep® Checking Battery Charge Level The following “Do’ s” and “Don’ts” are provided for your convenience an d safety . Battery indicator flashes the charge level is low - imm ediately after recharge. ...
-
Invacare Pronto M91 Base - page 32
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 32 Part No 1143153 SECTION 5—WHEELCHAIR OPERATION WARNING After ANY adjustments, repa ir or service and before use, make sure that all attaching hardware is tightene d securely - otherwise inju ry or damage may result. Set-up of the Electron ic Control Unit is to be perfor m ...
-
Invacare Pronto M91 Base - page 33
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 33 Pronto® M91™Base with SureStep® Using the Joystick to Drive the Wheelchair NOTE: For this proced ure, refe r to FIGURE 5.2. The joystick is located on the joystick housing and provides smooth control of speed and ? ...
-
Invacare Pronto M91 Base - page 34
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 34 Part No 1143153 SPJ+, MK6i SPJ+ w/PSS and MK6i SPJ+ w/ACC Joystick Switches and Indicators NOTE: For the following information, ref e r to FIGURE 5.3. FIGURE 5.3 SPJ+, MK6i SPJ+ w/PSS and MK6i SP J+ w/ ACC Joystick Switches and Indicators On/Off Butt ...
-
Invacare Pronto M91 Base - page 35
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 35 Pronto® M91™Base with SureStep® Speed Control Buttons The speed control buttons (tortoise button () and hare button () are used to set and adjust the maximum speed. 1. T o adjust the speed, perform ...
-
Invacare Pronto M91 Base - page 36
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 36 Part No 1143153 Information Gauge Display The information gauge display is located on the front of the joystick housing and provides the following information to the user on the status ? ...
-
Invacare Pronto M91 Base - page 37
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 37 Pronto® M91™Base with SureStep® MPJ+ Joystick Switches and Indicators NOTE: For this proced ure, refe r to FIGURE 5.4. Drive Select Toggle Switch The drive select toggle switch is located on the left side, below the LC ...
-
Invacare Pronto M91 Base - page 38
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 38 Part No 1143153 2. Rotate the knob counterclockwise (backward) to decrease the speed of the wheelchair to the programmed max speed. Joystick The joystick has proportional drive control, mean ...
-
Invacare Pronto M91 Base - page 39
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 39 Pronto® M91™Base with SureStep® Refer to LCD Display table on page 39 for descriptions of information shown. LCD DISPLAY ITEM DESCRIPTION DRIVE NAME This field shows the currently selected Drive’s Name. Available choices are as follows: Drive 1* Dr ...
-
Invacare Pronto M91 Base - page 40
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 40 Part No 1143153 FIGURE 5.6 LCD Display Screens - Main Screen Driving Screen NOTE: For this proced ure, refe r to FIGURE 5.7. This screen is shown when the operator issues a drive command and the Drive ? ...
-
Invacare Pronto M91 Base - page 41
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 41 Pronto® M91™Base with SureStep® FIGURE 5.8 LCD Display Screens - Co nnected Devices Screen Programmable Mono Port 1/2 or External Mode Switch The programmable mono port or external mode switch input is located at the rear of the j ...
-
Invacare Pronto M91 Base - page 42
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 42 Part No 1143153 Mode Switch NOTE: For this proced ure, refe r to FIGURE 5.4. The mode switch is used to select the operating mode for the wheelchair . The mode switch is located on ? ...
-
Invacare Pronto M91 Base - page 43
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 43 Pronto® M91™Base with SureStep® Repositioning the Joystick Adjustable ASBA Seat NOTE: For this proced ure, refe r to FIGURE 5.10. 1. T urn the adjustment lock lever to release the joystick mounting tube from the mounti ...
-
Invacare Pronto M91 Base - page 44
SECTION 5—WHEELCHAIR OPERATION Pronto® M91™Base with SureStep® 44 Part No 1143153 6. If necessary , perform the following to reposition the adjustment lock: A. Slide the adjustment lock from the mo unting bracket. B. Rotate adjustment lock 180° and slide ...
-
Invacare Pronto M91 Base - page 45
SECTION 5—WHEELCHAIR OPERATION Part No 1143153 45 Pronto® M91™Base with SureStep® MPJ+ Joysticks NOTE: For this proced ure, refe r to FIGURE 5.13. Disconnecting 1. Pull the latch aw ay from the joystick connector . 2. Disconnect the joystick connector from the remaini ...
-
Invacare Pronto M91 Base - page 46
SECTION 6—SEAT Pronto® M91™Base with SureStep® 46 Part No 1143153 SECTION 6—SEAT WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Before performing any maintenance, adju stment or service verify that On/Off switch on t ...
-
Invacare Pronto M91 Base - page 47
SECTION 6—SEAT Part No 1143153 47 Pronto® M91™Base with SureStep® Installing 1. P osition the seat in the rear piv ot brackets as shown in FIGURE 6.1. 2. Tilt front edge of seat down. 3. When seat is low ered, engage seat brackets into seat cle ...
-
Invacare Pronto M91 Base - page 48
SECTION 6—SEAT Pronto® M91™Base with SureStep® 48 Part No 1143153 Tilting the Seat Assembly Back 1. Place the wheelchair in a wel l ventilated area where work can be performed without risking damage to carpeting or floor covering. 2. Use the tilt funct ...
-
Invacare Pronto M91 Base - page 49
SECTION 7—FOOTBOARD ASSEMBLY Part No 1143153 49 Pronto® M91™Base with SureStep® SECTION 7—FOOTBOARD ASSEMBLY WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Before performing any maintenance, adju stment or service ve ...
-
Invacare Pronto M91 Base - page 50
SECTION 7—FOOTBOARD ASSEMBLY Pronto® M91™Base with SureStep® 50 Part No 1143153 FIGURE 7.1 Removing/Installing the Footboard Assembly Adjusting the Footboard Assembly Angle NOTE: For this proced ure, refe r to FIGURE 7.2. 1. Loosen the jam nut and set screw located underneath on ...
-
Invacare Pronto M91 Base - page 51
SECTION 7—FOOTBOARD ASSEMBLY Part No 1143153 51 Pronto® M91™Base with SureStep® Depth NOTE: For this proced ure, refe r to FIGURE 7.3. 1. Remove the quick release pin that secures the footboard assembly to the wheelchair frame. WARNING Make sure the detent balls o ...
-
Invacare Pronto M91 Base - page 52
SECTION 8—SHROUD/WHEELS Pronto® M91™Base with SureStep® 52 Part No 1143153 SECTION 8—SHROUD/WHEELS WARNING After any adjustments, repair or service and before us e, make sure th at all attaching hardware is tightened securely - othe rwise injury or damage may result. Before performing any maintenance, adju stment or service verify that ...
-
Invacare Pronto M91 Base - page 53
SECTION 8—SHROUD/WHEELS Part No 1143153 53 Pronto® M91™Base with SureStep® Installing 1. P erform one of the following: •T o p Shroud ‐ Po s i t i o n top sh roud on to the base frame and gently press down on top shroud to secure the four ...
-
Invacare Pronto M91 Base - page 54
SECTION 8—SHROUD/WHEELS Pronto® M91™Base with SureStep® 54 Part No 1143153 Engaging/Disengaging Motor Release Lever WARNING DO NOT engage or disengage the motor releas e lever until the On/Off switch on the joystick is in the Off position. CAUTION Ensure both motor re lease levers ar e fully engaged before driving the wheelchair NOTE: ...
-
Invacare Pronto M91 Base - page 55
SECTION 8—SHROUD/WHEELS Part No 1143153 55 Pronto® M91™Base with SureStep® Replacing Front/Rear Caster Assemblies NOTE: For this proced ure, refe r to FIGURE 8.3. NOTE: Front and rear caster assemblies are rep l a ce d in the same manner . NOTE: When rep l a ci n g ? ...
-
Invacare Pronto M91 Base - page 56
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 56 Part No 1143153 SECTION 9—BATTERIES WARNING Make sure power to the wheelchair is Off before performing this section. NEVER allow any of your tools and/or b attery cable(s) to contact both battery terminal(s)/post(s) at the same time. An electrical short may occur and serious persona ...
-
Invacare Pronto M91 Base - page 57
SECTION 9—BATTERIES Part No 1143153 57 Pronto® M91™Base with SureStep® Installing/Removing the Batteries NOTE: For this proced ure, refe r to FIGURE 9.1 on page 58 and FIGURE 9.2 on page 59. NOTE: Have the following tools available: Installing 1. Place the whe ...
-
Invacare Pronto M91 Base - page 58
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 58 Part No 1143153 9. If necessary , connect the wiring harness to the two batteries. Refer to Connecting/ Disconnecting the Battery Wir i n g Harness on page 60. 10. Reconnect RIGHT and LEFT motor le ...
-
Invacare Pronto M91 Base - page 59
SECTION 9—BATTERIES Part No 1143153 59 Pronto® M91™Base with SureStep® FIGURE 9.2 Installing/Removing the Batteries Removing 1. Place the wheelchair in a wel l ventilated area where work can be performed without risking damage to carpeting or floor covering. 2. V ...
-
Invacare Pronto M91 Base - page 60
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 60 Part No 1143153 NOTE: Perform this section on one battery at a time starting with the FRONT battery . Repeat STEP 10 to remo v e remaining battery from battery tray . 11. P erform one o ...
-
Invacare Pronto M91 Base - page 61
SECTION 9—BATTERIES Part No 1143153 61 Pronto® M91™Base with SureStep® 7. Reposition battery terminal cov ers over battery post(s). 8. Using new tie ‐ wraps, se cure the terminal cov ers to th e battery terminals as shown in FIGURE 9.3. 9. Repeat STEPS 1 ...
-
Invacare Pronto M91 Base - page 62
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 62 Part No 1143153 When to Charge Batteries SPJ+ Joysticks NOTE: For this proced ure, refe r to FIGURE 9.4. The Information Gauge Display located on the front of the joystick housing, it provides the state ...
-
Invacare Pronto M91 Base - page 63
SECTION 9—BATTERIES Part No 1143153 63 Pronto® M91™Base with SureStep® Charging Batteries DANGER When using an extension cord , use only a three wire extension cord having at least 16 AWG (American Wire Gauge) wire and the same or high er electrical rating as the devise being c onnected. Use of improper extension cord could r esult in a r ...
-
Invacare Pronto M91 Base - page 64
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 64 Part No 1143153 Battery Charger Operation WARNING READ and CAREFULLY follow the manufactur er’s instructions for each charger (supplied or purchased). If charging instru ctions are not supplied, consult a qualified technician for proper procedures prior to use. If the circuit breake ...
-
Invacare Pronto M91 Base - page 65
SECTION 9—BATTERIES Part No 1143153 65 Pronto® M91™Base with SureStep® WARNING DO NOT operate wheelchair with AC po wer cord attached to the wheelchair. FIGURE 9.6 On-Board Battery Charger Independent Charger WARNING READ and CAREFULLY follow the individual instructions for each charger (supplied or purchased). If charging instruction ...
-
Invacare Pronto M91 Base - page 66
SECTION 9—BATTERIES Pronto® M91™Base with SureStep® 66 Part No 1143153 Required Items: 1. Attach the battery charger connector to the charger port on the joystick. 2. Plug the charger ’ s AC power cord, or extension, into the grounded 120 VA C ? ...
-
Invacare Pronto M91 Base - page 67
SECTION 10—TRANSPORT READY PACKAGE Part No 1143153 67 Pronto® M91™Base with SureStep® SECTION 10—TRANSPORT READY PACKAGE NOTE: The information in this section is for wheelchairs ordered with the tran sport re a dy package ONLY . WARNING Contact Invacare Corporation (800-333-690 ...
-
Invacare Pronto M91 Base - page 68
SECTION 10—TRANSPORT READY PACKAGE Pronto® M91™Base with SureStep® 68 Part No 1143153 About Transport Ready Packages TRRO includes four factory ‐ installed transport brackets and a wheelchair anchored pelvic belt. TRRO has been crash ‐ tested in accordance with AN ...
-
Invacare Pronto M91 Base - page 69
SECTION 10—TRANSPORT READY PACKAGE Part No 1143153 69 Pronto® M91™Base with SureStep® Securing the Wheelchair to the Vehicle Positioning the Wheelchair in the Vehicle WARNING This wheelchair must be in a forward facing position during travel in a motor vehicle. The recommended clear zones for wheelchair seated occupants rest rained by BOT ...
-
Invacare Pronto M91 Base - page 70
SECTION 10—TRANSPORT READY PACKAGE Pronto® M91™Base with SureStep® 70 Part No 1143153 Securement Points FIGURE 10.1 Securement Points Securing the Wheelchair This wheelchai r is to be used only with Wheelchair Tie ‐ down and Occupant Restraint Systems (WTORS) that have been ...
-
Invacare Pronto M91 Base - page 71
SECTION 10—TRANSPORT READY PACKAGE Part No 1143153 71 Pronto® M91™Base with SureStep® Securing the Occupant Wheelchair-Anchored Belts WARNING The pelvic belt that is provid ed by Invacare has been test ed for use in a motor vehi- cle on this wheelchair ONLY. DO NOT replac e the pelvic belt wi th a different style pelvic belt. NOTE: Fo ...
-
Invacare Pronto M91 Base - page 72
SECTION 10—TRANSPORT READY PACKAGE Pronto® M91™Base with SureStep® 72 Part No 1143153 Vehicle-Anchored Belts NOTE: For this proced ure, refe r to FIGURE 10.3. This wheelchai r has an ov erall rating of “A ” with regard to accommodating the use and fit ...
-
Invacare Pronto M91 Base - page 73
SECTION 10—TRANSPORT READY PACKAGE Part No 1143153 73 Pronto® M91™Base with SureStep® Positioning Belts WARNING The angle of the pelv ic belt should be within the prefe rred zone of 45 to 75 degrees to the horizo ntal OR within the optional zone of 30 to 45 degrees to the horizontal. Steeper side-view pelvic belt angle s are especially im ...
-
Invacare Pronto M91 Base - page 74
SECTION 10—NOTES Pronto® M91™Base with SureStep® 74 Part No 1143153 NOTES ...
-
Invacare Pronto M91 Base - page 75
GLOBAL LIMITED WARRANTY (EXCLUDING CANADA) Part No 1143153 75 Pronto® M91™Base with SureStep® GLOBAL LIMITED WARRANTY (EXCLUDING CANADA) PLEASE NOTE: THE WARRANTY BELOW HAS B EEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANU FACTURED AFTER JULY 4, 1975. This warranty is extende d only to the original purc haser who purchases th ...
-
Invacare Pronto M91 Base - page 76
CANADA LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS B EEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANU FACTURED AFTER JULY 4, 1975. This warranty is exten ded only to the original pu rchaser who purchases th is product within Ca nada when new and unused from Invacare or a dealer. This warranty i s not extended to any other ...
Haben Sie eine Frage bezüglich Invacare Pronto M91 Base?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Invacare Pronto M91 Base nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Invacare Pronto M91 Base hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.