Bedienungsanleitung Sigma EF-530

12 Seiten 0.32 mb
Download

Zur Seite of 12

Summary
  • Sigma EF-530 - page 1

    14 ENGLISH Thank you very much for purchasing the Sigm a EF-530 DG SUPER EO-TTL II Electronic Flash. This product is specifically developed for the Canon E OS series SLR cameras. Depending on the camera model, functions and operation may vary . Please read this instruction booklet carefully . T o add to your enjoyment of photography , the flash has ...

  • Sigma EF-530 - page 2

    15 DESCRIPTION OF THE P ARTS EXTERNAL P ARTS 1.Flash Head 2.Built-in Wide Panel 3.AF Auxiliary Light 4.Bounce Angle; Up and Down 5.Bounce Angle; Right and Left 6.B ounce Lock and Release Button; Up and Down 7.Swivel Lock and Release Button; Right and Left 8.LCD Panel 9.Battery Cover 10.Shoe Ring 1 1.Shoe CONTROLS 12.MODE Button 13.<S EL> SELE ...

  • Sigma EF-530 - page 3

    16 If it still blinks after this procedure, check the battery power. ADJUSTING THE FLASH HEAD Depress the Bounce “Up and Down” Lock and Releas e Button and adjust the flash head to the desired positio n. ◆ If appears on the LCD panel when you turn on the flash, and if t his mark blinks, then the flash head is adjusted to an incor rect positio ...

  • Sigma EF-530 - page 4

    17 2. Turn on the power switch of the flash, the ETTL (TTL) mark will appear on the LCD panel and the flash will start charging. 3. Focus on your subject. 4. Check that the sub ject is located within the effective distance range indicated on the LCD panel. 5. Press the shutter button, after the flash is fully charged. Note : When the flash is fully ...

  • Sigma EF-530 - page 5

    18 5. The manual flash output display will stop blinking and remain displayed after you press the SEL button again. 6. Adjust t he focusing by pressing the shutt er button, note the subjec t distance on the focus ring on the lens. Then adjust the lens’ aperture value or flash power level until the distance indicated on the LCD panel of the flashg ...

  • Sigma EF-530 - page 6

    19 FE LOCK “FE” lock mode allows you to choose and lock the exposure before taking the picture. 1. Set the camera’s exposure mode (“P”, “T v”, “Av”, “M” or “DEP”). 2. Set the flash’s mode to the E-TTL or the High S peed S ync. 3. Focus on the subject 4. Focus on the subject in the center AF frame of the viewfinder , and ...

  • Sigma EF-530 - page 7

    20 MUL TI FLASH MODE While the shutter is open, the flash will fire repeatedly . By doing so a series of images of the subject will be exposed in one frame. A bright subject with a dark background shows more effectively in this mode. It is possible to set the firing frequency between 1Hz and 199H z. Up to 100 flashe s can be fired continuousl y . T ...

  • Sigma EF-530 - page 8

    21 Channel Setting When other people are using Wireless Flash mode near you, your flash m ay be connected with the other person’s flash and your flash may fire. In this circumstance, please set a different channel for your flash from that of the other person’s . Channel setting for Master unit 1. Press the MODE button to Select the mar k. 2. Pr ...

  • Sigma EF-530 - page 9

    22 ◆ If the flash ratio is indicated as or , press the + or - button until 1:1 is displayed. 4. Place the Slave Unit at the desire d position. 5. Make sure that the Master Un it and Slave Unit have both been charged. ◆ Master Unit’s Ready Light is lit and Slave Unit’s AF Auxiliary Light is blinking. 6. Focus on the subject and take the pict ...

  • Sigma EF-530 - page 10

    23 Wireless Flash Exposure Compensation 1. Please set master flash unit to the Wireless Flash Mode. 2. Press the SEL button to make mark blink. 3. Press the + or - button to set the flash exposure comp ensation amount. 4. Press the SEL button several times to m ake exposure compensation indicator appear. ◆ It is not necessary to make any addition ...

  • Sigma EF-530 - page 11

    24 ◆ If there are only two slave units, please se lect the indicator at step 3 ( step 9 and step 10 should be omitted). Wireless Multi Flash Set the master flash unit as follows. 1. Follow the procedure for Changing the Wireless M ode , and set to the MUL TI / mar k. 2. Press the SEL button to make the firing fre quency display blink. 3. Press ...

  • Sigma EF-530 - page 12

    25 Designated Slave Flash If using two or more EF-530 DG Super fla sh units, you can designate which flash will fire together by using the channel settings. In this mode, one flash unit will be used as the S lave Controller and the others for firing as Slaves. Setting the Slave Flash unit(s) for firing 1. Attach the slave unit to the camera body . ...

Produzent Sigma Kategorie Camera Flash

Dokumente, die wir vom Produzenten des Geräts Sigma EF-530 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Sigma
- Bedienungsanleitungen EF-530
- Produktkarten Sigma
- Informationsbroschüren
- oder Energieetiketten Sigma EF-530
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Sigma EF-530.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Sigma EF-530, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Sigma EF-530. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Sigma EF-530 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Sigma EF-530, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Sigma EF-530 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Sigma EF-530 verständlich ist.

Eine gänzliche Bedienungsanleitung von Sigma sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Sigma EF-530 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Sigma EF-530 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Sigma EF-530, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Sigma EF-530 - die uns die ersten Schritte während der Nutzung von Sigma EF-530 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Sigma EF-530 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Sigma EF-530 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Sigma EF-530?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Sigma EF-530 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Sigma EF-530 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)