-
Marantz SR4500 - page 1
Model SR4500 User Guide AV Surround Receiver SR4500N DFU_00_cover 04.5.14, 4:08 PM Page 9 Adobe PageMaker 6.5J/PPC ...
-
Marantz SR4500 - page 2
ENGLISH WARRANTY For warranty information, contact your local Marantz distributor. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz. IMPORTANT When seeking warranty service, it ...
-
Marantz SR4500 - page 3
CE MARKING English The SR4500 is in conformity with the EMC directive and low-voltage directive. Fran ç ais Le SR4500 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell SR4500 entspricht den EMC-Richtlinien und den Richtlinien f ü r Niederspannungsger ä te. Nederlands De SR4500 voldoet aan de EMC eise ...
-
Marantz SR4500 - page 4
Espa ñ ol ADVERTENCIAS - No exponga el equipo a la lluvia ni a la humedad. - No extraiga la tapa del equipo. - No introduzca nada en el interior del equipo a trav é s de los orificios de ventilaci ó n. - No maneje el cable de alimentaci ó n con las manos mojadas. - No cubra la ventilaci ó n con objetos como man- teles, peri ó dicos, cortinas, ...
-
Marantz SR4500 - page 5
ENGLISH 1 TABLE OF CONTENTS FOREWORD This section must be read before any connection is made to the mains supply. EQUIPMENT MAINS WORKING SETTING Your Marantz product has been prepared to comply with the household power and safety requirements that exist in your area. SR4500 can be powered by 230V AC only. COPYRIGHT Recording and playback of any ma ...
-
Marantz SR4500 - page 6
ENGLISH 2 INTRODUCTION Thank you for purchasing the Marantz SR4500 Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR4500. As there are a number of connection and configuration option ...
-
Marantz SR4500 - page 7
ENGLISH 3 Dolby Pro Logic II x is fully compatible with Dolby Surround Pro Logic technology and can optimally decode the thousands of commercially available Dolby Surround encoded video cassettes and television programs with enhanced depth and spatiality. It can also process any high-quality stereo or Advanced Resolution 5.1-channel music content i ...
-
Marantz SR4500 - page 8
ENGLISH 4 FRONT PANEL This feature (Sound Injection) combines a sound from one source with a picture from another. Choose the video source first, and then choose a different audio source to activate this function. r S.(Surround) SPEAKER B button Press this button to activate the Surround Speaker B system . “ SPKR B ” indicator will be illuminat ...
-
Marantz SR4500 - page 9
ENGLISH 5 DISP AU T O TUNED ST V – OFF NIGHT PEAK ANALOG DIGIT AL AT T SLEEP SURR AU TO DIRECT DISC 6.1 MT X 6. 1 EQ DIGITAL SURROUND PC M L C R SL S SR LFE SPKR B ¡7 ¡6 f s a ¡5 g jl ¡1 ¡3 d h ¡0 ¡2 ¡4 k FL DISPLAY a DISP (Display Off) indicator This indicator is illuminated when the SR4500 is in the display off condition. s SLEEP timer ...
-
Marantz SR4500 - page 10
ENGLISH 6 n DIGITAL INPUT (Dig.1 - 4) / OUTPUT (coaxial, optical) These are the digital audio inputs and outputs. There are 2 digital inputs with coaxial jacks, 2 with optical jacks. The inputs accept digital audio signals from a compact disc, LD, DVD, or other digital source component. For digital output, there is 1 coaxial output and 1 optical ou ...
-
Marantz SR4500 - page 11
ENGLISH 7 m Cursor ( , , , ) / OK buttons (when AMP mode is selected) Use these button when operating the SETUP MAIN MENU. , MENU OFF button (when AMP mode is selected) This button is used to exit from the SETUP MAIN MENU. . Numeric buttons 1 to 9 / Surround mode buttons Numeric buttons These buttons are used to enter figures in the selec- tion of ...
-
Marantz SR4500 - page 12
ENGLISH 8 RESETTING THE ALL CODE 1. Press and hold down the any Function Selector button and press SETUP button until the indicator blinking twice. 2. Press the code 9 - 8 - 1 . The indicator will blink twice. Then, RC5500SR will return to the factory preset code. Note: • After this procedure, the selected function button is set initial code and ...
-
Marantz SR4500 - page 13
ENGLISH 9 OPERATION OF REMOTE CONTROL UNIT REMOTE CONTROL The distance between the transmitter of the remote control and the IR SENSOR of the SR4500 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible. Remote-con ...
-
Marantz SR4500 - page 14
ENGLISH 10 CH.SEL LIP.SYNC PTY SUB-T/ATT AUDIO INPUT/DISC+ F.DIRECT RDS TUNE/SEARCH T-MODE TREBLE CHANNEL/SKIP BASS A/D P.SCAN/V-OFF 7.1CH IN STEREO MCH-ST MEMO CLEAR DISPLAY NIGHT CSII EX/ES VIRTUAL DTS PURE DIRECT AUTO 3 2 1 6 5 4 9 8 0 7 T.TONE MENU OFF SET UP/ MENU OSD VOL. TV VOL. MAIN SLEEP MUTE AMP TUNER CD TAPE CDR/MD DVD POWER VCR1 DSS/VCR ...
-
Marantz SR4500 - page 15
ENGLISH 11 CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7- speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, surround back left and right speakers, and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or ...
-
Marantz SR4500 - page 16
ENGLISH 12 Caution: • Be sure to use speakers with the specified impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. • Do not touch the speaker terminals when the power is on. It may cause you to receive a ...
-
Marantz SR4500 - page 17
ENGLISH 13 IN MONITOR VCR1 RS R C SW SBR SL SBL L R SPEAKER SYSTEMS 6 - 8 OHMS CENTER R FRONT SURROUND BACK SURROUND LL L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN OPT. OUT 2 1 7.1CH INPUT L SL C SBL SBR SW SR R TV DVD VCR1 OUT IN IN OUT DSS / VCR2 IN OUT CDR/MD TAPE PRE OUT OUT IN CD R L FM ( 75 Ω ) GND AM AUDIO ANTENNA DIG ...
-
Marantz SR4500 - page 18
ENGLISH 14 MONITOR VCR1 RS R C SW SBR SL SBL L R SPEAKER SYSTEMS 6 - 8 OHMS CENTER R FRONT SURROUND BACK SURROUND LL L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN 1 7.1CH INPUT L SL C SBL SBR SW SR R TV DVD VCR1 OUT IN IN OUT DSS / VCR2 IN OUT CDR/MD TAPE PRE OUT OUT IN CD R L FM ( 75 Ω ) GND AM AUDIO ANTENNA AUDIO S V S. SPEA ...
-
Marantz SR4500 - page 19
ENGLISH 15 CONNECTING THE ANTENNA TERMINALS IN OUT MONITOR VCR1 MONITOR RS R C SW SBR SL SBL L R SPEAKER SYSTEMS 6 - 8 OHMS CENTER R FRONT SURROUND BACK SURROUND LL L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN Y DSS / VCR 2 DVD COAX. OUT 4 3 OPT. OUT 2 1 7.1CH INPUT L SL C SBL SBR SW SR R TV DVD VCR1 OUT IN IN OUT DSS / VCR2 IN ...
-
Marantz SR4500 - page 20
ENGLISH 16 1. INPUT SIMPLE SETUP 2. SPEAKER 3. PREFERENCE 5. DOLBY PL II 6. CS II 4. SURROUND CD TAPE CD-R TV DVD VCR1 DSS SUBW L&R CENT SL&SR SB SB SIZE LPF/HPF BASS (Subwoofer) (Front Left & Right) (Center) (Surround Left & Right) (Surround Back) (Surround Back Size) (Low/High Pass Filter) (Bass Mix) → SMALL → LARGE → → 80 ...
-
Marantz SR4500 - page 21
17 ENGLISH 1. INPUT SETUP (ASSIGNABLE DIGITAL INPUT) Four digital inputs can be assigned as the desired source. Use this menu to select the digital input jack to be assigned to the input source. The Input Setup consists of 6 items, which are as below. • D1AUTO to D4AUTO : Digital AUTO mode If the input signal from the selected source is digital s ...
-
Marantz SR4500 - page 22
ENGLISH 18 5. If you finish these setup, press the or cursor button to select “ TO MAIN MENU ” then press the ENTER button to return the SETUP MENU. Or press the or cursor button to select “ EXIT ” then press the ENTER button to exit the SETUP MENU. Notes: • When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid ...
-
Marantz SR4500 - page 23
19 ENGLISH 2-2. SPEAKERS DISTANCE Use this parameter to specify the distance of each speaker ’ s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room. This is important for the timing of the acoustics to crea ...
-
Marantz SR4500 - page 24
ENGLISH 20 1. When you select “ MANUAL ” in T-MODE menu by pressing the or button, this unit will emit a pink noise from the front left speaker. At this time, adjust the desired level of the master volume. Remember the level of this noise and then press the button. This unit will emit the pink noise from the center speaker. 2. Using the and cur ...
-
Marantz SR4500 - page 25
21 ENGLISH HT-EQ : Select to active the HT-EQ with the or cursor buttons. The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments. Activating the HT-EQ feature when watching a fi ...
-
Marantz SR4500 - page 26
ENGLISH 22 TRUBASS SRS DIALOG EXIT TO MAIN MENU exit SETUP MENU 0 6 0 6 MENU STRUCTURE of CS II setup 6.CS II setup 6. CS II (CIRCLE SURROUND II ) 1. Select “ 6. CS II ” in SETUP MENU with or cursor button. 2. Press the ENTER button to enter this menu. 3. Press or cursor button to select desired item. 4. Press or cursor button to set the level. ...
-
Marantz SR4500 - page 27
23 ENGLISH USING THE SLEEP TIMER To program the SR4500 for automatic standby, press the SLEEP button on the remote. Each press of the button will increase the time before shut down in the following sequence. The sleep time will be shown for a few seconds in the display on the front panel, and it will count down until the time has elapsed. When the ...
-
Marantz SR4500 - page 28
ENGLISH 24 SURROUND MODE The SR4500 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. AUTO When this mode is selected, the receiver determines w ...
-
Marantz SR4500 - page 29
25 ENGLISH VIRTUAL This mode creates a virtualized surround sound experience from a two-speaker (front L and R) playback system playing any multichannel audio source (such as found on DVDs and digital broadcasts), including Dolby Digital, Dolby Pro Logic or DTS. STEREO This mode bypasses all surround processing. In stereo program sources, the left ...
-
Marantz SR4500 - page 30
ENGLISH 26 The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on SR4500 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and input signal. That relationship is as follows; Notes: • Dolby Digital ...
-
Marantz SR4500 - page 31
27 ENGLISH DISPLAY MODE You can select the display mode for the front display of the SR4500. To select this mode, press the DISPLAY on the front panel or on the remote. When this button is pressed, the display mode is switched in the following sequence. → Surround Mode → Auto-display Off → Display Off → Input Function → Surround Mode.... ...
-
Marantz SR4500 - page 32
ENGLISH 28 7.1 CH INPUT The SR4500 is equipped for future expansion through the use of Multi channel SACD multichannel player or DVD-Audio player. When this is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), SR (surround right) and SBL (surround back left) and SBR (surround back right) channe ...
-
Marantz SR4500 - page 33
29 ENGLISH 7.1 CH INPUT LEVEL This menu is to adjust the speaker levels for 7.1- channel input sources. Here you will adjust the volume for each channel so that they are all heard by the listener at the same level. 1. Press the CH.SEL button on the remote to enter this menu. 2. Press or cursor button to select desired channel. 3. Using the or curso ...
-
Marantz SR4500 - page 34
ENGLISH 30 BASIC OPERATION (TUNER) LISTENING TO THE TUNER Frequency scan step for AM is selectable. Default setup is 9 kHz step, if your country ’ s standard is 10 kHz step, Press TUNER button on the remote more than 6 seconds. Scan step will change. Note: • Preset memory for the tuner will clear by changing this setup. AUTO TUNING (Using the S ...
-
Marantz SR4500 - page 35
31 ENGLISH (Using the remote control unit) 1. Tune into the radio station you desire (Refer to the “ MANUAL TUNING ” or “ AUTO TUNING ” section). 2. Press the MEMO button on the remote. “ – – “ (preset number) starts blinking on the display. 3. Enter the desired preset number by pressing the numeric buttons. Note: • When entering ...
-
Marantz SR4500 - page 36
ENGLISH 32 RDS OPERATION Now in use in many countries, RDS (Radio Data System) is a description of the station ’ s programming hidden space in the FM signal. Your new receiver is equipped with RDS to assist in the selection of FM stations using station and network names, rather than broadcast frequencies. Additional RDS functions include the abil ...
-
Marantz SR4500 - page 37
33 ENGLISH SURROUND SPEAKER B SYSTEM The Surround Speaker B system is a function which allows you to listen to the same source in a room other than the room in which the SR4500 is located. The operations possible with the Surround speaker function are explained briefly below. ANOTHER ROOM PLAYBACK USING THE S(SURROUND) SPEAKER B TERMINALS The SR450 ...
-
Marantz SR4500 - page 38
ENGLISH 34 TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user ’ s guide ? 3. Are the power amplifiers and speaker working properly ? If the unit does not operate properly, check items shown in the following table. If y ...
-
Marantz SR4500 - page 39
35 ENGLISH TECHNICAL SPECI- FICATIONS FM TUNER SECTION Frequency Range ................................ 87.5 - 108.0 MHz Usable Sensitivity ............................ IHF 1.8 µ V/16.4 dBf Signal to Noise Ratio ................... Mono/Stereo 75/70 dB Distortion .................................... Mono/Stereo 0.2/0.3 % Stereo Separation ........ ...
-
Marantz SR4500 - page 40
SETUP CODES CD Aiwa ...................................................... 0184 Burmester .............................................. 0447 California Audio Labs ............................ 0056 Carver ......................................... 0184, 0206 Classic ................................................... 0324 Denon ..................... ...
-
Marantz SR4500 - page 41
Crown .................................................... 0207 Curtis Mathes ......... 0074, 0081, 0181, 0478, 0120, 0087, 0729, 0057, 0172, 0193, 1174, 1374 CXC ....................................................... 0207 Daewoo ................... 0478, 1688, 0119, 0699 Denon .................................................... 0172 Dumont ..... ...
-
Marantz SR4500 - page 42
Pioneer ........................................ 0094, 0085 Polk Audio ............................................. 0108 Profitronic .............................................. 0267 Proscan ....................................... 0087, 1087 Pulsar .................................................... 0066 Quasar .............................. 00 ...
-
Marantz SR4500 - page 43
05/2004 00M07BW851310 ecmf-e Printed in China is a registered trademark. www.marantz.com You can find your nearest authorized distributor or dealer on our website. JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Eu ...
Haben Sie eine Frage bezüglich Marantz SR4500?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Marantz SR4500 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Marantz SR4500 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.