-
Zanussi ZDI 122 - page 1
User manual Dishwasher ZDI 122 ...
-
Zanussi ZDI 122 - page 2
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of ...
-
Zanussi ZDI 122 - page 3
Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, in- cluding its hints and warnings. To avoid unnecessary mistakes and accidents, it is im- portant to ensure that all people using the appliance are thoroughly familiar with its opera- ti ...
-
Zanussi ZDI 122 - page 4
Installation • Check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier. • All packaging must be removed before use. • Any electrical and pl umbing work required to install this appliance must be carried out by a qualified and competent person. • For safety reas ...
-
Zanussi ZDI 122 - page 5
Programme selector dial and On/Off sw itch • when in this position, the mach ine is switche d off (correspondi ng light off), • when the mar ker on the dial corresponds with a programme, the machin e is s witched on and a pro- gramme is sele cted (programme s elector indicat or light on) Start/cancel button • Starting the washing programme: 1 ...
-
Zanussi ZDI 122 - page 6
Indicator lights Salt refilling indicator l ight Illuminates wh en special salt nee ds to be filled. It can remain ill uminated several hours after the salt has been fil led. Washing programmes Programme Degree of soil Type of load Programme description Intensive 70° Heavy soi l Crockery, cutlery, pots and pans Prewash Main wash 2 intermediate rin ...
-
Zanussi ZDI 122 - page 7
First use Before using your dishwasher for the first time: • Ensure that the electrical and water connec- tions comply with the installation instructions • Remove all packaging from inside the appli- ance • Set the water softener • Pour 1 litre of water inside the salt container and then fill with dishwasher salt • Fill the rinse aid disp ...
-
Zanussi ZDI 122 - page 8
The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area. Water hardness Adjusting the water hardn ess setting Use of salt Clarke °TH mmol/l manually electronically 64 - 88 91 - 125 9,0- 12,5 2 level 10 yes 53 - 63 76 - 90 7,6 - 8,9 2 le ...
-
Zanussi ZDI 122 - page 9
Press and hold th e start/cancel button and turn the programme sel ector dial cloc kwise till the first pro- gramme. Keep the butto n pressed un til the programme se lector indicator lig ht and the start/cancel indicator light start flashing . Release the butto n. The end of programme indicat or light wil l flash. The numb er of flashes co rrespond ...
-
Zanussi ZDI 122 - page 10
Remove any trace of salt. Replace the c ap tightly turning it c lockwise unt i l it stops with a click. IMPORTANT! Immediat e ly start a comp lete programme. IMPORTANT! Water will overfl ow from the contain er as salt is added. IMPORTANT! Top up the special salt when the light on the control panel illuminates. Filling with rinse aid Open the li d. ...
-
Zanussi ZDI 122 - page 11
Top up the rins e aid indica- tor ( B ) becomes cle ar CAUTION! Never fill the rin se aid dispense r with any other su bstances (e.g. dish washer cleaning ag ent, liquid deterg ent). This would damag e the appliance. Adjusting the dosage of rinse aid Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce the ...
-
Zanussi ZDI 122 - page 12
that water cannot collect in the container or a deep base. – Dishes and items of cutlery must not lie inside one another, or cover each other. – To avoid damage to glasses, they must not touch. – Lay small objects in the cutlery basket. • Plastic items and pans with non stick coat- ings have a tendency to retain water drops; these items wil ...
-
Zanussi ZDI 122 - page 13
Load upper ba sket. Light items (plastic bowls etc.) must be lo aded in the up - per basket and arrang ed so they do no t move. For taller items, th e cup racks can b e folded up- wards. If plates are to be loaded in the upper basket: load them starting from the rea r positions; tilting the m slightly forwards and avoiding the front positions ne ar ...
-
Zanussi ZDI 122 - page 14
Use of detergent IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and stor- age recommendations. Open the li d. Fill in the deter gent in compartment A . O bserve the do sing lev- els. For programmes with pre- wash add an additional detergent do se in com- partment B . When using deterg ent tablets : plac ...
-
Zanussi ZDI 122 - page 15
• Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. CAUTION! When the washing programme has finished, it is recommended that the dishwasher is un- plugged and the water tap turned off. Care and cleaning Cleaning the filters IMPORTANT! NEVER use the dishwasher without ...
-
Zanussi ZDI 122 - page 16
Cleaning the spray arms NEVER try to remove the spray arms. If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick. External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or so ...
-
Zanussi ZDI 122 - page 17
CAUTION! When a unit is no longer being used: • Pull the plug out of the socket. • Cut off the cable and plug and dispose of them. • Dispose of the door catch. This prevents children from trapping themselves inside and endangering their lives. The symbol on the product or on its pack- aging indicates that this product may not be treated as ho ...
-
Zanussi ZDI 122 - page 18
Fault code and malfunction Possible cause and solution • continuo us flashing of the start/cancel indicator light • 3 flashes of th e end of programme indic ator light • Anti-flood device is activate d Close the water ta p and contact your l ocal Service Force Center. • The programme does not start • The dish washer’s door has n ot been ...
-
Zanussi ZDI 122 - page 19
The wash results ar e not satisfactory The dishes ar e not clean • The wrong wash ing programme h as been selec ted. • The dish es are arranged in su ch a way as to s top water reaching all pa rts of the surface. The baskets must not be ov erloaded. • The spray arm s do not rota te freely due to incorrect arrangement of the load. • The filt ...
-
Zanussi ZDI 122 - page 20
Noise level dB(A) 53 Consumption values The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the var- iations of the power supply and the amount of dishes. Consumption values Programme Programme duration (in minutes) Energy consumption (in kWh) Water (litres) Intensive 70° 85-95 1, ...
-
Zanussi ZDI 122 - page 21
Upper basket Cutlery bask et Lower basket cup racks: position A Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person. Water connection WARNING! The dishwasher must not be connected to open water appliances or instantaneous w ...
-
Zanussi ZDI 122 - page 22
Inlet hose Connect the inlet hose to a water tap with an exte rnal thread of 3/4”. The inlet hose can be turned eith er to the left or th e right to suit the installa tion by means of the locknut. The locknut must b e correctly fitted to avoid water leaks. Drain hose Connect dra in hose to the sink. Required height: 30 to 100 cm above botto m of ...
-
Zanussi ZDI 122 - page 23
Electrical connection CAUTION! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. Always plug the mains plu ...
-
Zanussi ZDI 122 - page 24
www.electrolux.com 15699117 0-00-12122007 ...
Haben Sie eine Frage bezüglich Zanussi ZDI 122?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Zanussi ZDI 122 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Zanussi ZDI 122 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.