-
Graco Inc. 308-425 - page 1
308–425 Rev . C Supersedes B 06223 Model 237–296 Shown INSTRUCTIONS-P ARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 56:1 RA TIO KING CARBON STEEL Cart-Mounted Airless Package WITH DURA-FLO 900 DISPLACEMENT PUMP Refer to page 2 for a List of Models. T able of Contents W arnin ...
-
Graco Inc. 308-425 - page 2
List of Models Part No. Series Pump Model Ratio Maximum Fluid W orking Pressure Maximum Air Input Pressure 236–477 B King t 56:1 5000 psi (345 bar . 34.5 MPa) 90 psi (6 bar , 0.6 MPa) 237–296 B King t , with hose and gun 56:1 5000 psi (345 bar . 34.5 MPa) 90 psi (6 bar , 0.6 MPa) 237–281 B King t , with surge tank 56 ...
-
Graco Inc. 308-425 - page 3
W ARNING INJECTION HAZARD Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely serious injury , including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury . Fluid injected into the skin might look like just a cut, but it is ...
-
Graco Inc. 308-425 - page 4
W ARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury . Ground the equipment and the object being sprayed. Refer to Grounding on page 5. If there is any static sparking or you feel an electr ...
-
Graco Inc. 308-425 - page 5
Setup General Information NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. NOTE: Always use Genuine Graco Parts and Acces - sories, available from your Graco distributor . Refer to the Product Data Sheet for the pump, Form No. 305–787. If you suppl ...
-
Graco Inc. 308-425 - page 6
Setup Supplied Components Refer to Fig. 2. W ARNING A red-handled bleed-type master air valve (F) and a fluid drain valve (D) are supplied. These accesso - ries help reduce the risk of serious injury , including fluid injection and splashing of fluid in the eyes or on the skin, and injury from moving parts if you are adjus ...
-
Graco Inc. 308-425 - page 7
06225 Fig. 2 Model 237–296 Shown KEY SUPPLIED WITH ALL MODELS 1 Pump 2 Cart 4 Fluid Filter (includes drain valve D) (surge tank on Model 237–281) D Fluid Drain V alve (required) 7 Suction T ube 8 Suction Hose 19 Air Regulation Kit (includes items F , G, H, and J) F Red-Handled Bleed-T ype Master Air V alve (required, for pump) G Air Line Inlet ...
-
Graco Inc. 308-425 - page 8
Operation Pressure Relief Procedure W ARNING INJECTION HAZARD The system pressure must be manually relieved to prevent the system from starting or spraying accidentally . Fluid under high pressure can be injected through the skin and cause serious injury . T o reduce the risk of an injury from injection, splashing fluid, o ...
-
Graco Inc. 308-425 - page 9
Operation CAUTION T o avoid tip-over , the cart must be on a flat and level surface. Failure to follow this caution could result in injury or equipment damage. Prime the Pump 1. See Fig. 3. Remove the tip guard and spray tip from the gun (102). See the gun instruction manu - al. 2. Close the air filter/regulator (H) and bl ...
-
Graco Inc. 308-425 - page 10
10 308-425 Operation Shutdown and Care of the Pump W ARNING To reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 8. For overnight shutdown, stop the pump at the bottom of its stroke to prevent fluid from drying on the ex - posed displacement rod and damaging the th ...
-
Graco Inc. 308-425 - page 11
308-425 11 Operation 06225 F A B D 103 4 102 8 7 G H Detail of Air Line Connection and Air Regulation Kit (19) Fig. 3 Model 237–296 Shown KEY 4 Fluid Filter (includes drain valve D) (surge tank on Model 237–281) D Fluid Drain V alve (required) 7 Suction T ube 8 Suction Hose 102 Airless Spray Gun 103 Electrically Conductive Fluid Supply Hose A M ...
-
Graco Inc. 308-425 - page 12
1 2 2c 2a 2b 15 16 5 6 87 34 33 25 25 (Ref) 10 13 11 12 26 19 35 36 37 38 102 103 104 105 106 17 103 (Ref) 4 14 2d 12 308-425 Parts Part No. 236–477, Series B (includes items 1–38) Part No. 237–296, Series B (includes items 1–106) ...
-
Graco Inc. 308-425 - page 13
308-425 13 Parts Part No. 236–477, Series B (includes items 1–38) Part No. 237–296, Series B (includes items 1–106) Ref. No. Part No. Description Qty . Ref. No. Part No. Description Qty . 1 236–475 PUMP , King, 56:1 ratio; See manual 308–353 for parts 1 2 238–271 CART , portable Includes replaceable items 2a–2d 1 2a 1 13–362 . WHE ...
-
Graco Inc. 308-425 - page 14
06221 1 2 2c 2a 2b 15 16 5 6 87 34 33 25 25 (Ref) 10 13 11 12 19 35 36 37 38 17 4 14 2d 26 29 30 32 31 14 308-425 Parts Part No. 237–281, Series B ...
-
Graco Inc. 308-425 - page 15
308-425 15 Parts Part No. 237–281, Series B Ref. No. Part No. Description Qty . Ref. No. Part No. Description Qty . 1 236–475 PUMP , King, 56:1 ratio; See manual 308–353 for parts 1 2 238–271 CART , portable Includes replaceable items 2a–2d 1 2a 1 13–362 . WHEEL 2 2b 1 13–436 . RING, retaining 2 2c 1 13–361 . CAP 2 2d 191–605 . BR ...
-
Graco Inc. 308-425 - page 16
06229 1 2 2c 2a 2b 15 16 5 6 87 34 33 25 25 (Ref) 10 13 11 12 26 19 35 36 37 38 102 103 104 105 106 17 103 (Ref) 4 14 2d 16 308-425 Parts Part No. 237–285, Series B (includes items 1–38) Part No. 238–906, Series B (includes items 1–106) ...
-
Graco Inc. 308-425 - page 17
308-425 17 Parts Part No. 237–285, Series B (includes items 1–38) Part No. 238–906, Series B (includes items 1–106) Ref. No. Part No. Description Qty . Ref. No. Part No. Description Qty . 1 237–278 PUMP , King, 56:1 ratio; See manual 308–353 for parts 1 2 238–271 CART , portable Includes replaceable items 2a–2d 1 2a 1 13–362 . WHE ...
-
Graco Inc. 308-425 - page 18
18 308-425 T echnical Data Category Data Maximum fluid working pressure 5000 psi (345 bar , 34.5 MPa) Maximum air input pressure 90 psi (6 bar , 0.6 MPa) Ratio 56:1 Pump performance data See pump manual 308–353 Air consumption data See pump manual 308–353 Air inlet size 3/4 npsm(f) Fluid outlet size (at fluid filter) 3/8 npt(m) Fluid inlet size ...
-
Graco Inc. 308-425 - page 19
308-425 19 Dimensions 06224 Model 236–477 Shown A B C Pump Model A B C W idth Across Wheels Weight 236–477 51.1 in. (1297 mm) 28.1 in. (714 mm) 30.7 in. (780 mm) 26 in. (660 mm) 270 lb (123 kg) 237–296 51.1 in. (1297 mm) 28.1 in. (714 mm) 30.7 in. (780 mm) 26 in. (660 mm) 295 lb (134 kg) 237–281 51.1 in. (1297 mm) 28.1 in. (714 mm) 30.7 in. ...
-
Graco Inc. 308-425 - page 20
The Graco W arranty and Disclaimers W ARRANTY Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. Graco will, for a period of tw ...
Haben Sie eine Frage bezüglich Graco Inc. 308-425?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Graco Inc. 308-425 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Graco Inc. 308-425 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.