Bedienungsanleitung Honeywell 220736B

12 Seiten 0.16 mb
Download

Zur Seite of 12

Summary
  • Honeywell 220736B - page 1

    CONTENTS Specifications ................................................ 2 Ordering Information .................................... 2 Installation .................................................... 2 Setting and Adjustments ................................ 6 Checkout ...................................................... 11 220736A,B Internal Au ...

  • Honeywell 220736B - page 2

    Specifications 2 MODELS: 220736A,B Internal Auxiliary Switches for TRADELINE Modutrol IV Motors. Switches are actu- ated by cams in the motor. The cams can be set to operate the switches at any point in the motor stroke. 220736A—Includes one Spdt Micro Switch V3 snap acting switch, mounted on left side and operated by outer cam. 220736B—Include ...

  • Honeywell 220736B - page 3

    8. Lower the switch assembly into place and tighten the two mounting screws, making sure the switch follow- ers are properly aligned with the inner and outer cams in the motor. The 220736A includes only the switch for the outer cam. 9. Run all switch leadwires through slots to line volt- age section (at auxiliary end of motor), where connections to ...

  • Honeywell 220736B - page 4

    TABLE 1—AUXILIARY SWITCH LEADWIRE COLORS FOR LOW AND MEDIUM TORQUE SERIES 91 MOTORS WITH ONE AUXILIARY SWITCH. Replace with 220736A,B Factory-Installed Auxiliary Switch Leadwire Color a,b Leadwire Left Auxiliary Switch N.O. Yellow W/Yellow Orange N.C. Blue W/Blue Purple Com. Red W/Red Red Right Auxiliary Switch N.O. B/Yellow B/Yellow B/Orange N.C ...

  • Honeywell 220736B - page 5

    Replace with 220736A,B Factory-Installed Auxiliary Switch Leadwire Color a,b Leadwire Left N.O. Blue Blue W/Yellow Purple Auxiliary N.C. Yellow Yellow W/Blue Orange Switch Com. Red Red W/Red Red Right N.O. B/Blue B/Yellow B/Purple Auxiliary N.C. B/Yellow B/Orange Switch Com. B/Red B/Red B/Red Motor M445A M4182B M644D M6181F M9182W M8175B M6184D1035 ...

  • Honeywell 220736B - page 6

    TABLE 4—AUXILIARY SWITCH POSITION WITH MOTOR SHAFT ROTATED TO EITHER SIDE OF AUXILIARY SWITCH OPERATING POINT, AS VIEWED FROM POWER END. Auxiliary Switch Contact Positions N.O. Contact a N.C. Contact a (Red and Purple Leads) (Red and Orange Leads) Shaft Shaft Shaft Shaft Rotated Rotated Rotated Rotated ccw of cw of ccw of cw of Switch Switch Swit ...

  • Honeywell 220736B - page 7

    To turn the cams, insert small screwdriver (1/8" or 3 mm blade) through wiring box into slot on cam and move the screwdriver at the top. Refer to Fig. 3. Each division on the cam represents 15 ° of motor rotation. A) Two position motors (M8185): 1. Turn off power and remove cover of wiring box. 2. Determine amount of shaft rotation, in degree ...

  • Honeywell 220736B - page 8

    7. Check for proper switch differential and switching of auxiliary equipment by driving the motor through full stroke (in both directions) using the potentiometer. If necessary repeat steps 5 and 7 for 1 ° differential, or 6 and 7 for 10 ° differential until correct switching action is obtained. 8. Turn off power and disconnect potentiometer. 9. ...

  • Honeywell 220736B - page 9

    220736A,B SETTINGS AND ADJUSTMENTS 5. For switch differential of 10 ° , the cams must be rotated with screwdriver approximately 180 ° prior to setting the switching action. Refer to Fig. 3. Check continuity of the N.O. (Red to Purple) contacts and rotate cams as follows: a. If contacts are open, rotate cam counterclock- wise until N.O. (Red to Pu ...

  • Honeywell 220736B - page 10

    10 Fig. 8 — Auxiliary switch adjustment for M6184, M6194 motors. 4. For switch differential of 1 ° , check continuity of auxiliary switch N.O. (Red to Purple) contacts and, with screwdriver, rotate cam as follows: a. If contacts are open, rotate cam clockwise until N.O. (Red to Purple) contacts close. b. If contacts are closed, rotate cam counte ...

  • Honeywell 220736B - page 11

    W ARNING FIRE OR EXPLOSION HAZARD CAN CAUSE SEVERE INJURY OR DEATH When auxiliary switches control combustion equipment, incorrect wiring of the switches can allow the burner to come on at high fire. Check auxiliary switch wiring and cam adjustment be- fore turning on the system. Watch the controlled equipment through one complete cycle. Shut the s ...

  • Honeywell 220736B - page 12

    220736A,B SETTINGS AND ADJUSTMENTS Residential and Residential and Helping You Control Your World Building Controls Division Building Controls Division Honeywell Inc. Honeywell Limited—Honeywell Limitée 1985 Douglas Drive North 740 Ellesmere Road Golden Valley, Minnesota 55422 Scarborough, Ontario M1P 2V9 QUALITY IS KEY ...

Produzent Honeywell Kategorie Switch

Dokumente, die wir vom Produzenten des Geräts Honeywell 220736B erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Honeywell
- Bedienungsanleitungen 220736B
- Produktkarten Honeywell
- Informationsbroschüren
- oder Energieetiketten Honeywell 220736B
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Honeywell 220736B.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Honeywell 220736B, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Honeywell 220736B. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Honeywell 220736B ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Honeywell 220736B, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Honeywell 220736B hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Honeywell 220736B verständlich ist.

Eine gänzliche Bedienungsanleitung von Honeywell sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Honeywell 220736B bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Honeywell 220736B befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Honeywell 220736B, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Honeywell 220736B - die uns die ersten Schritte während der Nutzung von Honeywell 220736B erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Honeywell 220736B hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Honeywell 220736B im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Honeywell 220736B?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Honeywell 220736B nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Honeywell 220736B hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)