-
Woods Equipment 211718 - page 1
I NST AL LA TION MAN U AL SA VE THIS MANU AL! Include it with your Loader Manual. It contains safety , operation, and repair part information not found in other manuals. 211718 LOADER MOUNTING KIT For 1009, 1012 Loaders On Mahindra ® T ractors 2815, 3215 FW A Includes Hose Kit 1014620 MAN0530 (6/30/200 6) T ested. Proven. Unbe atable. ...
-
Woods Equipment 211718 - page 2
2 Introduction LMK (Rev . 6/6/2005) T O THE DEALER : Assemb ly and prop er installation of this pro duct is the re sponsi bility of the Woods ® dealer . Read manua l instruc tions and sa fety rules . Make sure al l items o n the Dea ler ’s Pre -Delive ry and De live ry Check L ists in th e Loader Operator ’s Manual ar e compl eted be fore rele ...
-
Woods Equipment 211718 - page 3
Safety 3 Loader Mounti ng Kit SR 3 (4/25/200 3) INST ALLA TION This Loader Mounting Ki t is to be used only for the loa d ers and tractors specified in t his manu al. Any other use or modif ication of this mounti n g kit may result in serious injury or death. Hydraulics must be connected as instructed in this manual. Do not substitute part ...
-
Woods Equipment 211718 - page 4
4 Mount Installation MAN0530 (6/30/2006 ) 21 1718 LOADER MOUNTING KIT ■ Only use 21 1 718 Loader Mounting Kit for mounting Woods 1009 and 1012 loaders o n Mahin - dra ® 2815 and 3215 tractors. Any other use or mod- ification of these mounting kit s may result in serious injury or death. Safety instructions are important! Read all att achment ...
-
Woods Equipment 211718 - page 5
Mount Inst allation 5 MAN05 30 (6/30/2006 ) Inst all Right and Lef t Rear Mount s 1. Using a l ifting device, align r ight mount (1) wit h holes on tractor mo unting pad. 2. Secure right m ount to mounting pad usin g four cap sc rews ( 1 1) and ha rdened f lat washe rs (1 3). See Fig ure 1 and Figure 2. 3. Secure mount to tractor frame using four c ...
-
Woods Equipment 211718 - page 6
6 Mount Installation MAN0530 (6/30/2006 ) Inst all Rear Axle Pla tes 1. Remove thr ee bo lts from low er axle housing. 2. Place a xle pla te (4) o ver ax le hou sing and secu re using two cap scr ews (8) a nd har dened flat wash- ers (1 4) in the middle a nd rear holes. 3. Install cap sc rew (9) and ha rdene d flat wash er (12) in the front hol e. ...
-
Woods Equipment 211718 - page 7
Mount Inst allation 7 MAN05 30 (6/30/2006 ) Inst all Cross Brace 1. Place cro ss brace ( 3) betwee n right (5) and le ft (6) rear rail s and right (1) and left (2) rear mounts. 2. Secu re parts together usin g six cap screws (10) (three pe r side), har dened flat w ashers ( 13), and hex nuts (15) . Figure 5 . Cr oss Br ace Inst allati on 1. 1020638 ...
-
Woods Equipment 211718 - page 8
8 Mount Installation MAN0530 (6/30/2006 ) T orq ue Hard wa re T orque hardware to speci fication s liste d belo w . Inst all Grill Guard (Optional) 1. Align g rill guar d (16) with hol es on fr ont of tr actor frame and sec ure into pos ition usi ng four cap screws ( A) and h ardened f lat washers (B). 2. T orque to 50 lb s-ft. 16. 1021860 Grill gu ...
-
Woods Equipment 211718 - page 9
Hydraulic Inst allation 9 MAN0530 (6/30/2006 ) 1014620 HOSE KIT IN ST ALLA TION Keep hands and body away from pres surized lines. Use paper or cardboard, not hands or other body p a rt s to check for lea ks. Wear safety goggles. Hydraulic fluid under pressure can ea sily penetrate skin and will c ause serious injury or death. Make sure that ...
-
Woods Equipment 211718 - page 10
10 Hydraulic Inst allation MAN053 0 (6/30/200 6) Inst all Hydraulic Fittings to T ractor IMPORT ANT ■ Incorrect installation can damag e tractor hydraulic system. Read and un de rst and instructions in tractor manual before connecting. 1. Locate the hydrau lic m anifold b lock on the righ t side of the t ractor chassis , belo w and in fron t of t ...
-
Woods Equipment 211718 - page 11
Hydraulic Inst allation 11 MAN0530 (6/30/2006 ) Connect Hydraulic Hoses 1. Remove hy draulic fitt ing from the P BY port on th e control valv e. 2. Install elbo w (4) in to PBY p ort. 3. Connect en d of hose ( 1) to the IN, OUT an d PBY ports on the control valv e. 4. Route ho ses alo ng insid e right l oader mo unt. 5. Connect hos e (1) from the I ...
-
Woods Equipment 211718 - page 12
12 Hydraulic Inst allation MAN053 0 (6/30/200 6) Connect Work Port Hoses 1. The control valv e kit contains hoses as semble d with quick coupler s. A ttach the h oses to load er feedlines , followi ng the co lor sch eme shown i n Figure 20 . 2. Con nect load er fee d hoses to con trol val ve hydraulic couple rs when a ttaching load er . Figure 20 . ...
-
Woods Equipment 211718 - page 13
Part s 13 MAN0530 (6/30/200 6) 21 1718 LOADER MOUNTING KIT R E F P ART QTY DESCRIPTION 1 1020638 1 Right rear mo unt 2 1020639 1 Left rear mo unt 3 1020646 1 Cross bra ce 4 1020649 2 Rear axle plate 5 1020650 1 Right rear rail 6 1020651 1 Left rear rail 7 1020669 8 M14 x 1.5P x 1 10 mm HHCS CL8.8 8 307309 4 M12 x 1.75P x 60 mm HHCS 9 32333 2 M10 x ...
-
Woods Equipment 211718 - page 14
14 Part s MAN05 30 (6/30/2006 ) 1014620 HOSE KIT R E F P ART QTY DESCRIPTION 1 1014619 3 Hose, 36" x 9/1 6 JICF x 9/16 JIC F 2 315045 3 Adapter , 3/8 BSP TM x 3/8 NPTF 3 445 52 3 El bow , 3/8 N PTM x 9/16 JICM 45° 4 635 58 1 El bow , 9/16 J ICM x 9/16 ORBM 9 0° (not sho wn) ...
-
Woods Equipment 211718 - page 15
Appendix 15 Bolt T orque & Size Chart s (Rev . 10 /10/2005) BOLT T OR QUE CHA R T Always tighten har dware to these values unles s a different tor que value or tighte ning p rocedure i s list ed for a specifi c applica tion . F ast eners must al wa ys be repla ced with t he sam e grade as sp ecified in the manual par ts list. Always use the pro ...
-
Woods Equipment 211718 - page 16
16 Appendix Bolt T orque & Size Chart s (Rev . 10/ 10/2005) BOLT SIZE CHART NO TE: Char t shows bolt thread sizes and co rrespo nding head (wrenc h) sizes for standa rd SAE and metr ic bol ts. ABBREVIATIONS A G ............ .................... ............ ............. ... Agric ulture A T F .................. ............ A uto matic T ransm ...
-
Woods Equipment 211718 - page 17
F-3079 (Rev . 5/2/2006) Wo od s E q u i p m e n t Company 260 6 South Illinois Ro ute 2 Post Offi ce Box 1000 Oregon, Illinois 61061 8 00-319-663 7 tel 800-3 99-6637 fa x www .W o odsEquipment.com W ARRANTY (All Models Except Mow’ n Machine TM Zero-T urn Mo wers and W oods Bou ndary TM Utility V eh icles) Please Enter I nformation Be lo w and Sav ...
-
Woods Equipment 211718 - page 18
F-8494 (Rev . 6/23/2005) ©2006 Woods Equipment Company . All rights reserved. WOO DS, the Woods logo, and "T est ed. Proven. Unbeatable." are tradem arks of Woods Equipment Company . All other trademarks, tra de names, or service mark s not owned by W oods Equipment Company that appear in this manual ar e the property of their respective ...
¿Tienes una pregunta acerca de Woods Equipment 211718?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Woods Equipment 211718, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Woods Equipment 211718 probablemente compartirá una forma de solucionarlo.