-
SRS Labs WL66 - page 1
WL66 Series Owner's manual Manuel de l'utilisateur Bedienungsanleitung Manual del usario Manual d'uso per l'utente Manual do proprietário Gebruikershandleiding TOSHIBA g ...
-
SRS Labs WL66 - page 2
English 2 Contents SETTING UP Safety precautions – Some do’s and don ’ts for you to be aware of 3 Installation and important information 4 The remote control – an at-a-glance guide 5 Connecting external equipment – a guide to connecting external equipment to the back of the television 6 Connecting a computer – connecting a computer to t ...
-
SRS Labs WL66 - page 3
English 3 Safety P recautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety . They are of a general nature, intended to help with all electronic c ...
-
SRS Labs WL66 - page 4
English 4 Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place on a sturdy platform, the mounting surface should be flat and steady . It should then be secured to the wall with a sturdy tie usi ...
-
SRS Labs WL66 - page 5
English 5 Simple at-a-glance reference of your remote control. T ext control buttons T o display on-screen information Stereo/bilingual transmissions T o exit Menus No function on this model T o mute the sound T o select input from external sources T o select mode No function on this model On-screen Menus Widescreen viewing Selectable picture prefe ...
-
SRS Labs WL66 - page 6
English 6 6 Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. HDMI™ (High-Definition Multimedia Interface) is for use with a DVD , decoder or electrical equipment with digital audio and video output. It is designed for best pe ...
-
SRS Labs WL66 - page 7
English 7 Connecting a computer Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. When PC input mode is selected some of the television ’s features will be unavailable e.g. Manual setting in the SET UP menu, Colour , Tint , DNR and Black Stretch in the Pic ...
-
SRS Labs WL66 - page 8
English 8 Controls and input connections If the RED LED is unlit check that the mains plug is connected to the power supply . If the picture does not appear press i on the remote control, it may take a few moments. T o put the television into Standby press i on the remote control. T o view the television press i again. The picture may take a few se ...
-
SRS Labs WL66 - page 9
English 9 2 3 5 4 Using left or right select your language , then press OK . Then press left or right to select your country and press OK . Y our System will have been selected, if there is a choice, press right to select from the systems displayed. T o start Auto tuning press OK . B/G – Continental Europe, I – UK D/K – Eastern Europe, L – ...
-
SRS Labs WL66 - page 10
English 10 Manual tuning Prog. Channel Station 0 C60 1 C22 BBC1 2 C28 BBC2 3 C25 ITV 4 C32 CH4 5 C69 OK Se lect Sor t MENU Back EXIT Watch TV 1/2 SE T U P Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Watch TV 4 Press right to select System and use up or down to change ( if required, ...
-
SRS Labs WL66 - page 11
This television has direct channel entry if the channel numbers are known. Select the Manual tuning screen in Step 3 . Enter the Programme number , the System , then C for standard (terrestrial) channels or S for cable channels and the Channel number . Press OK to store. P LEASE N OTE English 11 Manual tuning Prog. Channel Station 0 C60 VCR 1 C22 B ...
-
SRS Labs WL66 - page 12
English 12 Y ou must allow the television to complete the search. When the search is complete the television will automatically select programme position 1. This may not be a clear picture, so the station order can be changed using Manual tuning , see page 9 . B/G – Continental Europe, I – UK D/K – Eastern Europe, L – France 5 Y our System ...
-
SRS Labs WL66 - page 13
English 13 Sound controls continued, SRS WOW™ sound effects, dual, stable sound ® SRS WOW ™ sound effects SRS WOW™ is a suite of audio effects which use the stereo signals being broadcast to produce enhanced sound from the television ’s speakers. If mono sound is broadcast only T ruBass will be available. SRS 3D gives a rich sound experien ...
-
SRS Labs WL66 - page 14
English 14 Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the { button repeatedly to select between Exact Scan , Wide , Super Live 2 , Cinema 2 , 4:3 , Super Live 1 , Cinema 1 , Subtitle and 14:9 . Please note: Whenever the MENU button is pressed the picture size setti ...
-
SRS Labs WL66 - page 15
Use this setting when watching a 1080i source, it will display the image as transmitted without scaling or cropping the picture. EXACT SCAN This option is only available when watching a 1080i source. ☛ 42 MODEL ONL Y English 15 Widescreen viewing continued Using the special functions to change the size of the displayed image (i.e. changing the he ...
-
SRS Labs WL66 - page 16
English 16 1/2 SE T U P Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Watch TV PICTURE Picture settings OK 3D Colour management Off Base colour adjustment Cinema mode Off MENU Back EXIT Watch TV Picture controls T o return to the original factory settings select Reset in the Picture ...
-
SRS Labs WL66 - page 17
English 17 Picture controls continued DNR enables you to ‘soften’ the screen representation of a weak signal to reduce the noise effect. DNR – Digital Noise Reduction Select DNR from the Picture settings menu. Use left or right to adjust. The differences may not always be noticeable (for the best result use lower settings as picture quality c ...
-
SRS Labs WL66 - page 18
English 18 Base colour adjustment Hue Saturation Brightness Red +2 +6 +4 Green 0 0 0 Blue 0 0 0 Y ellow 0 0 0 Magenta 0 0 0 Cyan 0 0 0 Reset OK MENU Back EXIT Watch TV Picture controls continued In the Picture settings menu press down until Colour T emperature is highlighted. Press left or right to select between Normal , W arm and Cool to suit you ...
-
SRS Labs WL66 - page 19
English 19 PICTURE Picture settings OK 3D Colour management Off Base colour adjustment Cinema mode On MENU Back EXIT Watch TV FUNCTION T eletext Auto. Panel lock Off Auto format On Blue screen On Side Panel 1 MENU Back EXIT Watch TV The Side Panel feature lightens or darkens the band each side of the screen when in 4:3 or 14:9 format. This helps pr ...
-
SRS Labs WL66 - page 20
English 20 P anel lock, time display , stereo/bilingual transmissions, the timer From the FUNCTION menu select P anel lock and choose On or Off using left or right . Panel lock disables the buttons on the television. All buttons on the remote control can still be used. P anel lock 1 When Panel lock is On , a reminder will appear when the buttons on ...
-
SRS Labs WL66 - page 21
English 21 PC settings – picture position, clock phase, sampling clock, reset 3 3 Use left or right to adjust until the picture clears. In the SET UP menu press down until PC Setting is highlighted. Press OK to select, then down to highlight Clock phase . Use left or right to adjust until the picture clears. 1 2 The Clock phase matches the PC sig ...
-
SRS Labs WL66 - page 22
English 22 1/2 SE T U P Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Watch TV Input selection and A V connections Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6 for a clear view of the back connection recommendations. Most med ...
-
SRS Labs WL66 - page 23
English 23 1/2 SE T U P Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Watch TV 1/2 SE T U P Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Watch TV HDMI audio If the connected HDMI source does not support digital audio, ...
-
SRS Labs WL66 - page 24
English 24 The 6 / / 7 button : T o view text services press 6 / / 7 . Press again to superimpose the text over a normal broadcast picture and again to return to normal viewing. P rogrammes cannot be changed until text is cancelled. The first text page shown will be the initial page. Any text page can be accessed by entering the 3 digit page number ...
-
SRS Labs WL66 - page 25
English 25 For use with P f and P e to view sub -pages when available. T o access sub-pages: X Press 6 / / 7 to display text. Press again to superimpose text over a normal broadcast picture. Press again to return to normal television viewing . Programmes cannot be changed until this has been done. T o display a page of text: 6 / / 7 Press T to acce ...
-
SRS Labs WL66 - page 26
English 26 A Remove it by pressing . Why is there a message permanently on the screen? Q i + Below are the answers to some of the most common queries. For more information go to www .toshiba.co.uk A Check the mains switch is on and check all mains connections. Check the television is not in standby mode. Why is there no sound or picture? Q A Check ...
-
SRS Labs WL66 - page 27
English 27 Q uestions and A nswers continued A Good performance of text depends on a good strong broadcast signal. This normally requires a roof or loft aerial. If the text is unreadable or garbled, check the aerial. Go to the main index page of the text service and look for the User Guide . This will explain the basic operation of text in some det ...
-
SRS Labs WL66 - page 28
English 28 Broadcast systems/channels P AL-I UHF UK21-UK69 P AL-B/G UHF E21-E69 VHF E2-E12, S1-S41 SECAM-L UHF F21-F69 VHF F1-F10, B- Q SECAM-D/K UHF R21-R69 VHF R1-R12 Video Input P AL, SECAM, NTSC 3.58/4.43 External connections EXT1 Input 21-pin SCART RGB, A/V EXT2 Input 21-pin SCART A/V , S -video EXT3 Input Phono jacks Y , P B /C B , P R /C R P ...
¿Tienes una pregunta acerca de SRS Labs WL66?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con SRS Labs WL66, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con SRS Labs WL66 probablemente compartirá una forma de solucionarlo.