-
Philips DC200/05 - page 1
DC200 Docking Entertainment System Register your product and get support at www.philips.com/welcome User Manual DC200_Eng 2008.2.15 11:20 Page 1 ...
-
Philips DC200/05 - page 2
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. T o change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fix new fuse which should be a BS1362 3 Amp, A.S.T .A. or BSI approved type. 3. Refit the fuse cover . If the fitted plug is not suitable for your socket ...
-
Philips DC200/05 - page 3
1 2 6 % # @ $ ! 0 8 7 9 5 4 3 1 DC200_Eng 2008.2.15 11:20 Page 3 ...
-
Philips DC200/05 - page 4
P-01 AL1 AL1 84 0 84 0 T001 2 3 4 DC200_Eng 2008.2.15 11:20 Page 4 ...
-
Philips DC200/05 - page 5
English Congratulations on your purchase and welcome to Philips! T o fully benefit from the support that Philips offers, register your product at www .philips.com/welcome. SUPPLIED ACCESSORIES – 1X certified AC/DC 9V adaptor (Brand name: PHILIPS, Model No.: AS140-090-Dw , Input: 100-240V ~ 50/60Hz 0.7A, Output: 9.0V 1.56A) – 4X dock adaptors (f ...
-
Philips DC200/05 - page 6
OK for iPod . . . . . . . . . . . . . . confirms menu selection. 7 Dock connector – connects iPod player 8 USB jack – connects an external USB mass storage device 9 REPEA T ALARM / BRIGHTNESS CONTROL – switches off the alarm for a 9 minute period – changes the brightness of the display illumination 0 TUNING ¡1 / 2™ – adjusts clock/alar ...
-
Philips DC200/05 - page 7
POWER SUPPL Y Mains adaptor 1 Connect the mains adaptor to the set's DC 9V socket and to the power socket. Helpful hints: To avoid damage to the set, use only the adaptor supplied! The power rating is located on the bottom of the set. SELF-POWERED BACK-UP The self-powered back-up conveniently allows your alarm and clock time settings to be sto ...
-
Philips DC200/05 - page 8
5 Press PROG/SET TIME to confirm. 6 In clock mode, press ALBUM/PRESET -/+ 1 / 2 to set your time zone. 7 To zoom in/out the clock display , press MODE in clock mode. TUNER 1 Press SOURCE repeatedly to switch on the radio (FM only). ™ Display shows the radio frequency of the last selected waveband. Y our pre- set station is also shown if you are l ...
-
Philips DC200/05 - page 9
USING THE ALARM GENERAL T wo different alarm times can be set. This can be useful when you need to be woken up at a different time e.g. during the week and at the weekend, and you can set different wake-up modes: •T uner mode. • iPod/USB mode. • Nature sound mode. • Buzzer mode. The gentle wake buzzer alarm increases its beep tone frequency ...
-
Philips DC200/05 - page 10
SWITCHING OFF THE ALARM There are three ways of switching off the alarm. Unless you cancel the alarm completely , the 24-hour ALARM RESET will be automatically selected after 59 minutes from the time your alarm first goes off. 24 HOUR ALARM RESET If you want the alarm mode to be stopped immediately but also wish to retain the same alarm setting for ...
-
Philips DC200/05 - page 11
PLA YING iPod USING DC200 1 Remove the top cover of dock. 2 Snap the compatible iPod into the dock connector . 3 Press SOURCE repeatedly to switch on the iPod mode. • Make sure that you have powered on Apple iPod before selecting iPod source. ™ On the DC200’ s display , “iPod” is displayed when iPod is connected. 4 T he connected iPod pla ...
-
Philips DC200/05 - page 12
Notes: In some USB flash players (or memory devices), the stored contents are recorded using copyright protection technology . Such protected contents will be unplayable on any other devices (such as DC200 device). Supported formats : – USB or memory file format F A T12, FA T16, FA T32 (sector size: 512 - 65,536 bytes) – MP3 bit rate (data rate ...
-
Philips DC200/05 - page 13
™ The current album number flashes. 3 Press ¡1 / 2™ to select a desired album number . 4 Press PROG to confirm. ™ The current track number flashes. 5 Press ¡1 / 2™ to select a desired track number . 6 Press PROG to confirm. 7 Repeat steps 3-6 to select and store all desired tracks. 8 To start playback of your programme, press 2; . Helpful ...
-
Philips DC200/05 - page 14
directly set the sleep function. CONNECTING AN EXTERNAL DEVICE Y ou can listen to the sound of the connected external device through your DC200’ s speakers. 1 Press SOURCE repeatedly to select AUX mode. 2 Use the supplied AUX-IN cable to connect DC200’ s AUX IN jack to an AUDIO OUT or headphone jack on an external equipment (such as CD player , ...
-
Philips DC200/05 - page 15
TROUBLESHOOTING If a fault occurs, first check the points listed below before taking the set for repair . If you are unable to remedy a problem by following these hints, consult your dealer or service centre. W ARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee. Do not open the set as the ...
-
Philips DC200/05 - page 16
Disposal of your old product Y our product is designed and manufactured with high quality mate- rials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection sys ...
-
Philips DC200/05 - page 17
Printed in China PDCC-LL/JS-0807 W Meet Philips at the Internet http://www .philips.com DC200 DC200_Eng 2008.2.15 11:20 Page 17 ...
¿Tienes una pregunta acerca de Philips DC200/05?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Philips DC200/05, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Philips DC200/05 probablemente compartirá una forma de solucionarlo.