-
Jacuzzi U961000F - page 1
Inst aller: Leave this manual for homeowner . Homeowner: Read this manual and keep for future reference. INST ALLA TION AND OPERA TING INSTRUCTIONS ©2003 Jacuzzi Whirlpool Bath U961000F 12/04 ...
-
Jacuzzi U961000F - page 2
IMPORT ANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SA VE THESE INSTRUCTIONS CAUTION: TEST THE GROUND FAULT CIRCUIT INTERRUPTER PROTECTING THIS APPLIANCE PERIODI- CALLY IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS. WARNING: RISK OF ACCIDENTAL INJURY OR DROWNING; CHILDREN SHOULD NOT USE HYDROMAS- SAGE BATHTUB WITHOUT ADULT SUPERVI ...
-
Jacuzzi U961000F - page 3
PRECAUTIONS • Do not operate the whirlpool system unless the bath is filled with water to at least 2" above the highest jet. • Never drop or insert any object into any opening. • Do not use oil-based bath additives in your whirlpool bath. • When cleaning your bath, do not use abrasive substances which will damage the bath's surfac ...
-
Jacuzzi U961000F - page 4
CONTENTS S pecifications _________________________________________________________________________ 1-2 Roughing-in Reference _________________________________________________________________ 3-4 Installation ___________________________________________________________________________ 5-8 Framing and Support __________________________________________ ...
-
Jacuzzi U961000F - page 5
Important: Read complete instructions before beginning installation. Each whirlpool bath arrives ready for installation, completely equipped with motor/pump assembly and plumbing and fittings necessary for whirlpool operation. An optional drain/overflow kit is available for installation on the bath. Remove the bath from the carton. Retain the shipp ...
-
Jacuzzi U961000F - page 6
MODEL PRODUCT WEIGHT OPERATING GALLONAGE TOTAL WEIGHT/ FLOOR LOADING SPECIFICATIONS (Corner) DIMENSIONS DRAIN/OVERFLOW DIMENSIONS SKIRT & MOUNTING CUTOUT HEATER READY FOR FIELD INSTALLATION CORNER BATHS DRAIN/OVERFLOW A B ESPREE 6060 60" (1524 mm) L 60" (1524 mm) L 22" ( 559 mm) H 888 lb (404 k/g)/ 36 lb/sq. ft. (176 kg/sq. m) 12 ...
-
Jacuzzi U961000F - page 7
Note: Unless otherwise specified, units are produced with left or right-hand versions. Note: 1. The overall dimensions are nominal with a tolerance of +0 and -1/4". 2. *Add 1/4" to this dimension when roughing-in for 3-wall niche. 3. Measurements inside each unit represent cutout in floor to allow for drain/overflow. 4. All measurements a ...
-
Jacuzzi U961000F - page 8
Note: 1. The overall dimensions are nominal with a tolerance of +0 and -1/4". 1. Measurements inside each unit represent cutout in floor to allow for drain/overflow. 2. All measurements are in inches. To convert to millimeters, multiply inches by 25.4. 6060 CUTOUT ESPREE 6060 WITHOUT SKIRT 57-7/8" 22-1 1/16" 22-1 1/16" 49-3/4&qu ...
-
Jacuzzi U961000F - page 9
Framing and Support The drain/overflow of the bath extends below the bottom of the bath. Note that this requires a cutout in the floor . The floor structure beneath the bath must be able to support a total weight of bath, water , and bather . Refer to the t able under total weight for your model. The unit must be supported from the bottom of the ba ...
-
Jacuzzi U961000F - page 10
MOTOR SERVICE ACCESS (WITH INTEGRAL SKIRT) REMOV ABLE SKIRT ACCESS P ANELS ACCESS AREA Reinstalling Panel Hold at an angle to the skirt and insert clip under edge of skirt opening. Bow the panel outward and insert clip on other side. BOW ACCESS P ANEL SKIRT ACCESS P ANEL 20" 36" 24" 18" B A C SERVICE ACCESS (CORNER BA TH WITHOUT ...
-
Jacuzzi U961000F - page 11
Electrical Connection 6060 With Heater On the 6060 with integral skirt, one junction box has been provided for the pump/motor and one for the heater . T o access, remove skirt access panel. See top view for location. A separate GFCI protected outlet (not provided) is re- quired for pump/motor and is to be installed in the junc- tion box. The juncti ...
-
Jacuzzi U961000F - page 12
Drain Information A drain/overflow assembly (sold separately) must be installed on the bath, water tested, and connected to the sanitary system of the house. After opening the carton, inspect for damage and verify that the kit is of the proper finish. In the Jacuzzi Whirlpool Bath drain/ overflow kit, note that the waste flange, strainer , over- fl ...
-
Jacuzzi U961000F - page 13
Magic Touch ® Whirlpool Switch The Magic T ouch whirlpool ON/OFF switch, conven- iently located on the bath, allows you to turn the whirl- pool system on and off while in the bath. Simply push down on the switch button to turn on the whirlpool sys- tem. T o turn the system off, push down on the button again. If your bath has an optional Jacuzzi Wh ...
-
Jacuzzi U961000F - page 14
RapidHeat Operation Once the heater is installed and the whirlpool pump is operating, the heating function is totally automatic. The heater will help maintain the temperature of the water in the bath. Vacuum Switch The heater is equipped with a preset vacuum switch which will not allow the heater to turn ON if the pump is not running with water flo ...
-
Jacuzzi U961000F - page 15
Cleaning the Bath T o clean your bath, simply use a mild, nonabrasive liquid detergent solution. Y ou can protect and restore the gloss to a dulled acrylic surface by applying Meguiar's #10 Mirror Glaze, a product specifically de- signed for use on acrylic finishes. If Meguiar's is not available, an acrylic polish of equal quality or auto ...
-
Jacuzzi U961000F - page 16
General Whirlpool Bath T roubleshooting Guide PROBABLE CAUSES PROBLEM REMEDY Pump/Motor does not start. Pump/Motor operates but no fully adjustable jets are functioning. Pump/Motor operates but air is not injected into water. Pump/motor does not shutoff. Water leakage from pump unions. Pump/motor shuts off by itself or with wall timer, before set t ...
-
Jacuzzi U961000F - page 17
Authorized Service If you need a referral for a service company near you, or need assistance with operation or maintenance related questions, please call our Service Support Department at 1-866-905-2289. For service agent listing, visit our web site at http://www .jacuzzi.com/. T o find the service agent listings, click on “For The T rade”. The ...
-
Jacuzzi U961000F - page 18
REP AIR P ARTS NOTE: When a part number has 3 Xs, substitute the appropriate color code for the Xs: 940 White 914 Almond 969 Oyster GRAPHIC RING AIR 8263000 BMH JET BMH JET ASSEMBL Y 8489XXX P ANEL, 1 POSITION D851XX X AIR CONTROL ASSEMBL Y U767000 1 POSITION AIR CONTROL KNOB 8267XXX RET AINER NOZZLE 8412XXX NOZZLE BHM 8413XXX O RING 8488000 INTERN ...
-
Jacuzzi U961000F - page 19
REP AIR P ARTS GRAPHIC RING AIR 8263000 AIR CONTROL ASSEMBL Y U767000 KNOB 8267XXX P ANEL 2 POSITION 8241XXX BUTTON AIR ACTUA TOR 8246XX X (MOTOR/PUMP ON/OFF) BEZEL 8247XXX GRAPHIC RING ON/OFF 8262XXX BELLOWS C377000 CUP C841000 2 POSITION CONTROLLER (AIR & PUMP/MOTOR ON/OFF) SCREWS (8) 9724000 15 Jacuzzi Whirlpool Bath© U961000F 12/04 ...
-
Jacuzzi U961000F - page 20
REP AIR P ARTS SUCTION ASSEMBL Y SCREW #10-24/2 3959000 RING BACK-UP SUCTION 213600 0 HTC JET SUCTION COVER/GASKET ASSEMBL Y 6651XXX LOCKNUT 1643000 SUCTION FITTING 1958000 LOCKNUT 1835000 HTC ASSEMBL Y B785XXX SCREWS (3) 9356000 CLAMPING RING B788XXX SWIVEL HTC B786XXX GASKET 1840000 HTC BODY A320XXX BACKUP RING 1836000 Jet Body BG15000 S top (Par ...
-
Jacuzzi U961000F - page 21
REP AIR P ARTS KNOB 8267XXX (2) BEZEL 8247XXX BUTTON AIR ACTUA TOR 8246XXX GRAPHIC RING AIR (2) 8263XXX GRAPHIC RING ON/OFF 8262XXX 3 POSITION P ANEL 9224XXX AIR CONTROL ASSEMBL Y U767000 (2) BELLOWS C377000 CUP C841000 3 POSITION P ANEL SCREWS (10) 9724000 17 Jacuzzi Whirlpool Bath© U961000F 12/04 ...
-
Jacuzzi U961000F - page 22
REP AIR P ARTS UNION REP AIR KIT 9250000: O-RING 9231000 ADAPTER UNION 9234000 NUT UNION 9233000 MOTOR/PUMP ASSEMBLY 7.0 A 115V 60Hz Y660000 RAPIDHEA T REP AIR HEA TER DISCHARGE SIDE U394000 (SHOWN) UNION GASKETS (2) Y671000 UNIONS (2) Y670000 SUCTION SIDE S749000 UNION GASKETS (2) G947000 UNIONS (2) T180000 SWITCH AIR ACTUA TED 7396000 STRAIN RELI ...
-
Jacuzzi U961000F - page 23
WARRANTY COVERAGE Jacuzzi Whirlpool Bath (the “Company”) offers the following express limited warranty to the original purchaser of any Jacuzzi Whirlpool Bath Espree Series Bath Product (“unit”) who purchases the product for personal or single family use (“user”). The Company will repair or replace, at its option, the unit or its equipm ...
-
Jacuzzi U961000F - page 24
RESPONSIBILITIES OF OTHERS Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for ensuring the unit is free of defect or damage. Notices are placed on and in the unit and on the shipping carton advising the installer of this responsibility. In ...
¿Tienes una pregunta acerca de Jacuzzi U961000F?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Jacuzzi U961000F, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Jacuzzi U961000F probablemente compartirá una forma de solucionarlo.