-
Airlink101 A3-Port USB Print Server APSUSB2 - page 1
Quick Installation Guide Model # APSUSB2 Ve r. 2 A 3-Port USB Print Server ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 2
Step 1 Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other end of the cable to a router . S tep 2 Make sure all the printers are powered OFF , then connect one end of the printer cable to the printer port of the Print Server and attach the other end of the cable to the printer port of the printer . Step ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 3
Section 2 Installing PS Utility Step 1 Insert the provided CD and wait for the setup menu to appear . Step 2 Click on PS Utility . Step 3 Click Next . Note: If the setup menu does not appear automatically after you have inserted the CD, go to Start , Run , type D:autorun.exe (where D is the letter of your CD drive) and click OK . ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 4
Step 4 Click Next . Step 5 Click Ye s . Step 6 Click Finish . ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 5
Section 3 Configuring Network Setting Before configuring the Print Server ’ s network setting, please take note of your computer’s TCP/IP setting. Step 1 Click on Start , Run , and type command (for Windows 95/98/ME) or cmd (for Windows 2000/ XP) and click OK . Step 2 At the command prompt, type ipconfig and press Enter . Step 3 Write down the ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 6
For the Subnet Mask and Default Gateway fields, enter the same number as the TCP/IP setting of your computer . S tep 6 In the IP Address field, enter a valid IP address, subnet mask, and default gateway that matches your local area network. For example : If your computer ’s IP Address is 192.168.1 .100 , enter the same three numbers: 192.168.1 in ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 7
V erifying Network Connection Section 4 Step 1 Run the PS Utility by going to S tart , (All) Programs , PS Utility , PS Utility v2.00 . Step 2 Make sure the print server is detected under the Device Name . Step 3 Click on Show Web Setup to display the Print Server ’ s Web Configuration Utility . Step 4 Click on the Management link and select Prin ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 8
Step 5 Click on the T ools link and select the port that a printer is connected to and click the T est button. The Print Server will perform a low-level print test, bypassing the operating system layer . Perform the print test for each port that has a printer connected to it. Note: Y our printer should print out a test page. If not, verify that the ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 9
Section 5 Running PS Wizard W arning: Make sure you have installed the printer driver locally on every computer in your network before running the PS Wizard. Otherwise, the PS Wizard will not run properly . Be sure to run the PS Wizard on all the computers in your network. Step 1 Insert the provided CD and wait for the setup menu to appear . Step 2 ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 10
Section 4 Step 3 Click Next . Step 4 Select a printer that is connected to the print server and click Next . Note: If you have more than one printer connected to the print server , you’ll need to re-run the PS W izard again to setup the other printers. ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 11
Step 5 Double-click on the Print Server Name , select the Printer Port that the printer is connected to, and click Next . Step 6 Click Reboot (for Windows 95/98/ME) or Finish (for Windows 2000/XP). S tep 7 Re-run the PS Wizard and setup any remaining printer(s) that are connected to the print server . Step 8 Run the PS Wizard on all the computers i ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 12
Section 6 Performing Operating System Print T est The final step in setting up the Print Server is to perform an operating system print test. Please note that the instructions below are for Windows XP , but the steps are similar for all the other Windows operating systems. Step 1 Click on Start , Settings , Printers and Faxes . Step 2 Right-click o ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 13
Section 7 T echnical Support E-mail: support@airlink101.com T oll Free: 1-888-746-3238 Web Site: www .airlink101.com For more information on how to use the Web Configuration Utility or setup for Mac OS, please refer to the User ’ s Manual in the provided CD. Y ou have successfully configured the Print Server for printing. Step 3 Click on the Prin ...
-
Airlink101 A3-Port USB Print Server APSUSB2 - page 14
Copyright © 2004 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of A irLink101. All other product or service names are the property of their re ...
¿Tienes una pregunta acerca de Airlink101 A3-Port USB Print Server APSUSB2?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Airlink101 A3-Port USB Print Server APSUSB2, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Airlink101 A3-Port USB Print Server APSUSB2 probablemente compartirá una forma de solucionarlo.