-
Image 831.21007 - page 1
¨ USERÕS MANUAL Model No. 831.210070 Serial No. The serial number can be found in the location shown below . Write the serial number in the space above. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal (on the frame behind the access cover) Paten ...
-
Image 831.21007 - page 2
T ABLE OF CONTENTS IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CHOOSING A LOCA TION FOR THE RENEW 20 ...
-
Image 831.21007 - page 3
3 IMPORT ANT SAFETY INSTRUCTIONS W ARNING: TO REDUCE THE RISK OF DROWNING, ELECTRIC SHOCK, OR SERIOUS INJUR Y , READ THE FOLLOWING IMPORT ANT PRECAUTIONS BEFORE USING THE RENEW 207. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure that all users of the RENEW 207 are adequately informed of all precautions. 2. Use t ...
-
Image 831.21007 - page 4
4 20. Do not use an extension cord with the RENEW 207; this could damage the motor and will void the warranty . 21. DANGERÑIf you will be using the RENEW 207 outside, do not bury the power cord. Keep the power cord away from lawn mow- ers, hedge trimmers, and other similar equip- ment. 22. W ARNINGÑThe power cord is equipped with a Ground Fault C ...
-
Image 831.21007 - page 5
34. W ARNINGÑT o reduce the risk of injury or drowning: Consult your physician about pos- sible side-effects of any medications you may be taking before using the RENEW 207. Heat from the water , in conjunction with some medications, may cause drowsiness and increase the risk of drowning. Others can effect blood pressure, heart rate, and circula- ...
-
Image 831.21007 - page 6
6 BEFORE YOU BEGIN Spa Shell Wood Panels Cover Latch Locking Buckle Console Filter Spa Cover Power Cord Ground Fault Circuit Interrupter (GFCI) Access Cover Congratulations for selecting the new IMAGE ¨ RENEW 207 massage spa. The RENEW 207 of fers the features and quality of a traditional hot tub at an affordable price, providing the benefits of h ...
-
Image 831.21007 - page 7
7 CHOOSING A LOCA TION FOR THE RENEW 207 There are many factors to consider when choosing a location to set up the RENEW 207. These factors vary depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to consider as you decide where you want to set up the spa. If you set up the RENEW 207 inside: 1 ...
-
Image 831.21007 - page 8
1. Before beginning assembly , make sure that you have read and understand the information in the box above and on the previous page. Remove the four screws from the access cover on the console side of the spa. Remove the access cover by sliding it down and then pulling the bottom of it away from the spa. Be careful not to damage the Spa Shell (15) ...
-
Image 831.21007 - page 9
4. Attach the nozzle of the included air pump to the valve on the Insulating Liner (4). Fill the Insulating Liner with air . Be careful not to overfill the Insulating Liner . Lay the Spa Cover (1 1) on the floor as shown. Set the Insulating Liner (4) inside the Spa Cover . Insert one of the four straps on the inside of the Spa Cover (1 1) through o ...
-
Image 831.21007 - page 10
10 USING THE RENEW 207 The RENEW 207 is designed to seat two adults. The spa holds 150 gallons of water and offers an automat- ic, programmable heating (70¡ F to 104¡ F) and filtra- tion system. Seven thera-jets soothe and relax tired, sore muscles, and the strength of the massage is adjustable. Follow the guidelines below to use and maintain the ...
-
Image 831.21007 - page 11
TESTING AND TREA TING THE W A TER The hydrotherapy spa comes with a starter chemical pack for maintaining the water in the spa. Disregard the directions on the individual packages of ÒQUICK pHix It DOWNÓ and ÒQUICK pHix It UP .Ó However , the directions on the bottle of ÒNon-chlorine ShoxÓ and ÒBromine BaseÓ are correct. Always keep the che ...
-
Image 831.21007 - page 12
12 SECURING THE SP A COVER The spa cover can be secured by snapping the latches on the spa cover into the buckles on the side of the spa. The buckles can be locked by inserting the key and turning it clockwise 1/4 turn. T o unlock the buck- les, insert the key and turn it counter- clockwise 1/4 turn. After the spa cover is secured, it can be fur- t ...
-
Image 831.21007 - page 13
13 The RENEW 207 is designed to provide years of enjoyment. Follow the guidelines below to properly maintain the spa. MAINTENANCE SCHEDULE DAIL Y ¥ Check the water level. If necessary , refill the spa to the level shown in step 3 on page 8. ¥ Adjust the pH balance and sanitizer level if needed (see W A TER CHEMISTR Y on page 14). WEEKL Y ¥ Clean ...
-
Image 831.21007 - page 14
14 W A TER CHEMISTR Y The hydrotherapy spa comes with a starter chemical pack for maintaining the water in the spa. (See TEST- ING AND TREA TING THE W A TER on page 1 1.) Additional chemicals can be purchased at a pool and spa supply store. CAUTION: The chemicals used to maintain the pH balance of the water and to sanitize the water can be dangerou ...
-
Image 831.21007 - page 15
15 T o drain the RENEW 207, follow these steps: 1. Set the temperature control on the console to the lowest setting. 2. Unplug the power cord. 3. Remove the access cover from the spa. 4. Remove the drainage hose from the clip and attach a garden hose to the valve on the drainage hose. 5. Open the valve by turning the knob counterclock- wise. The wa ...
-
Image 831.21007 - page 16
16 1. SYMPTOM: THE SP A WILL NOT OPERA TE a. Check the power cord. The power cord must be plugged into a grounded outlet (see PLUGGING IN THE RENEW 207 on page 10). b. Check the GFCI breaker to see if it is tripped or if it was not turned on. Reset the GFCI breaker . 2. SYMPTOM: THE CIRCUIT BREAKER OR GFCI BREAKER TRIPS WHILE THE SP A IS OPERA TING ...
-
Image 831.21007 - page 17
17 8. SYMPTOM: THE W A TER PULSA TES OR THERE IS MINIMUM W A TER FLOW a. This usually occurs only when the water level is low . Add water to the level shown in step 3 on page 8. b. The filter may be dirty . Check the filter and clean it if necessary . 9. SYMPTOM: THE W A TER IS NOT BEING CLEANED BY THE FIL TER a. Check to see if the filter is in pl ...
-
Image 831.21007 - page 18
18 P ART LISTÑModel No. 831.210070 R0400A Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. Key No. Qty . Description 1 16 Buckle Screw 2 8 Buckle 3 3 Motor Bolt 4 3 W asher 5 1 Heater Wire Harness 6 1 T emperature/Hi Limit Probe Assembly 7 1 Console Overlay 8 1 Pressure Switch 9 1 Control Box 10 2 ...
-
Image 831.21007 - page 19
32 26 5 1 2 3 4 6 11 13 15 2 14 16 28 29 37 7 19 20 21 12 9 25 22 23 30 31 39 24 27 42 34 33 18 41 35 8 10 10 17 17 40 43 43 40 36 40 38 3 4 EXPLODED DRA WINGÑModel No. 831.210070 R0400A 19 ...
-
Image 831.21007 - page 20
ORDERING REPLACEMENT P ARTS T o order replacement parts, simply call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays). T o help us assist you, please be pre- pared to give the following information when calling: ¥ The MODEL NUMBER of the product (831.210070 ...
¿Tienes una pregunta acerca de Image 831.21007?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Image 831.21007, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Image 831.21007 probablemente compartirá una forma de solucionarlo.