-
Lang Manufacturing AGC - page 1
Lang Manufacturing Company 6500 Merrill Creek Parkway Everett, WA 98203 Part Number: 60801- Phone: 425-349-2400 Fax: 425-349-2733 © Copyright 1998 WWW.LANGWORLD.COM Installation Operation Maintenance Troubleshooting Model: AGC Add-on Clamshell® Hood ...
-
Lang Manufacturing AGC - page 2
2 THIS MANUAL MUST BE RETAINED FOR FUTU RE REFERENCE. READ, UNDERSTAND AND FOLLOW THE IN STRUCTIONS AND WARNINGS CONTAINED IN THIS MANUAL. FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. POST IN A PROMINENT LOCATION INSTRUCTIONS TO BE FOLLOWED IN TH E EVENT USER SMEL ...
-
Lang Manufacturing AGC - page 3
3 TABLE OF CONTENTS CHAPTER PAGE 1. READ FIRST ................................................................................................................. 4 2. EQUIPMENT DE SCRIPTION........................................................................................ 6 3. UNPACKI NG ......................................................... ...
-
Lang Manufacturing AGC - page 4
4 IMPORTANT READ FIRST IMPORTANT NOTICE: If the Clamshell® is to be attached to a griddle/ charbroiler in the field – it is recommended to complete the installation of moun ting adapter before un-crating the Clamshell®. CAUTION: UNIT IS EXTREMELY HEAVY. FOR SAFE HANDLING, INSTALLER SHOUL D OBTAIN HELP AS NEEDED, OR EMPLOY APPROPRIATE MA TERIALS ...
-
Lang Manufacturing AGC - page 5
5 IMPORTANT READ FIRST IMPORTANT WARNING: KEEP WATER AND SOLUTIONS OUT OF CONTROLS. NEVER SPRAY OR HOSE CONTROL CONSOLE, ELECTRIC AL CONNECTIONS, ETC. CAUTION: MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES, MUCOUS MEMBRANES AND CLOTHING. PRECAUTIONS SHOULD BE TAKEN TO WEAR RUBBER GLOVES, GOGGLES OR FACE SHIELD AND PROTECTIVE CLOTHING. CAREFULLY RE AD ...
-
Lang Manufacturing AGC - page 6
6 2. EQUIPMENT DESCRIPTION Lang Model: AGC ADD-ON CLAMSHELL® HOOD 2.1 Exterior Construction • The Clamshell® dimensions are 19 1/2” (49.53cm) High in the lowered position, 38 1/3” (97.36cm) High in the raised position, 36 3/4” (93.35 cm) Deep, and width is 24” (60.96cm). • The stainless steel hood makes for easy cleaning. • Pivoting ...
-
Lang Manufacturing AGC - page 7
7 3. UNPACKING 3.1 Receiving the Clamshell® Upon receipt, check for fre ight damage, both visi ble and conceal ed. Visible damage shoul d be noted on the freight bill at the tim e of delivery and si gned by the carrier's agent. Concealed loss or dam age means loss or damage which does not beco me apparent until the merchandise has been unpack ...
-
Lang Manufacturing AGC - page 8
8 4. INSTALLATION WARNING: INSTALLATION OF THE UNIT MUST BE DONE BY PERSONNEL QUALIFIED TO WORK WITH ELECTRICITY AND PLUMBING. IMPROPER INSTALLATION CAN CAUSE INJURY TO PERSONNEL AND/OR DAMAGE TO EQUIPMENT. UNIT MUST BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. NOTICE: The data plate is located on the inside of the hood wrap. The Clamshell ...
-
Lang Manufacturing AGC - page 9
9 4. INSTALLATION CONT’D Figure 1 Griddle / Charbroiler ACV ACV Manual Shut-off Valve Regulator Legend: ACV = Automatic Cut-off Valve A = 1” Pipe B = Reduction to 3/4” Pipe C = Reduction to 1/2” Pipe D = Increase to 3/4” Pipe O = Optional second AGC Parts AGC AG C ...
-
Lang Manufacturing AGC - page 10
10 5. INITIAL START UP 5.1 Initial Lighting Procedure for an Clamshell® WARNING: DURING INITIAL USE, OR USE A FTER SERVICE, IF THE PILOT DOES NOT IGNITE ON FIRST TRY THE MA IN GAS VALVE MUST BE TURNED OFF FOR AT LEAST FIVE MINUTES. NOTICE: While cooking, the Clamshell® must be monitored at all times. Do not leave the Clamshell® unattended while ...
-
Lang Manufacturing AGC - page 11
11 6. OPERATION 6.1 Clamshell® Operation CAUTION: ALWAYS KEEP THE AREA NEAR THE APPLIANCE FREE FROM COMBUSTIBLE MATERIALS. CAUTION: KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN AND DRY. IF SPILLS OCCUR, CLEAN IMMEDIATELY, TO AVOI D THE DANGER OF SLIPS OR FALLS. NOTICE: While cooking, the Clamshell® must be monitored at all times. Do not leave the Clams ...
-
Lang Manufacturing AGC - page 12
12 7. SEQUENCE OF OPERATION 7.1 Power On • When the Clamshell® is plugged in, 220 Volts is app lied to the blower motor. The Clamshell® is designed to have a c onstantly running blower m otor. • The air switch then senses the b lower motor, closes, and app lies the 220 Volts to a 24 VAC transformer. • The transformer then supplies 24 VAC to ...
-
Lang Manufacturing AGC - page 13
13 8. MAINTENANCE & CLEANING WARNING: KEEP WATER AND SOLUTIONS OUT OF CONTROLS. NEVER SPRAY OR HOSE CONTROL CONSOLE, ELEC TRICAL CONNECTIONS, ETC. CAUTION: MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES, MUCOUS MEMBRANES AND CLOTHING. PRECAUTIONS SHOULD BE TAKEN TO WEAR RUBBER GLOVES, GOGGLES OR FACE SHIELD AND PROTECTIVE CLOTHING. CAREFULLY RE AD ...
-
Lang Manufacturing AGC - page 14
14 9 . TROUBLESHOOTING 9.1 Symptoms What follows is a chart of Symptoms and Possible Causes to aid in diagnosing faults with the Clamshell®. Refer to the Symptoms column to locate the type of failure then to the Possible Cause for the items to be checked. To test for a possible cause , refer to the TEST sectio n and locate the Possible Caus e then ...
-
Lang Manufacturing AGC - page 15
15 9. TROUBLESHOOTING CONT’D 9.2 TESTS NOTICE: Service on this, or any other, LANG appliance must be performed by qualified personnel only. Consult y our authorized service station directory or call the factory at 1-800-22 4-LANG (5264), or WWW.LANGW ORLD.COM For the service station neares t you. WARNING: BOTH HIGH AND LOW VOLTAG ES ARE PRESENT I ...
-
Lang Manufacturing AGC - page 16
16 10. PARTS LIST Item No. Part# Descri p tion 1 103-73 HANDLE 2 103-19 HOOD WRAP 3 103-193 HOOD SKIRT, LEFT SIDE 3 103-194 HOOD SKIRT, RIGHT SIDE 3 103-197 HOOD SKIRT, FRONT W/ HINGE 4 50201-08 WIRE GUARD ADD ON BROILER 5 80302-06 IGNITION / SENSOR , FR 310.5 ref151.26 255.3 0.f236.48.2(, FR 310.06>>BDCBT9 0 057.4 Tm05257.4 ...
-
Lang Manufacturing AGC - page 17
17 10. PARTS LIST CONT’D Item No. Part# Descri p tion 16 103-61 TUBE #2 17 80501-10 REGULATOR GAS SET 3 1/2" NG BROILER 18 80300-10 MODULE SPARK IGNITOR BROILER * 30307-02 CLIP MOUNT MERCURY T ILTSWITCH 19 30307-01 SWITCH MERCUR Y TILTSWITCH 20 103-14 TUBE #1 21 70101-28 UNION ELBO 90 DEGREESTL 3/8" 22 51002-11 HOOD SPRING AGC 23 51002- ...
-
Lang Manufacturing AGC - page 18
18 11. WIRING DIAGRAM ...
-
Lang Manufacturing AGC - page 19
19 12. WARRANTY Lang Manufacturing Limited Warranty to Commercial Purchasers* (Domestic U.S., Hawaii, & Canadian Sales only. ) Lang Manufactu ring Equipm ent (“Lang Equipm ent”) has been skillfully manufactured, carefully in spected and packaged to meet rigid standards of excellence. Lang warrants its Equipmen t to be free from defects i n ...
¿Tienes una pregunta acerca de Lang Manufacturing AGC?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Lang Manufacturing AGC, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Lang Manufacturing AGC probablemente compartirá una forma de solucionarlo.