-
Zanussi ZD 699 ALU - page 1
DISHW ASHER ZD 699 AL U INS TRUCTION BOOKLE T 152980 03/1 UK ...
-
Zanussi ZD 699 ALU - page 2
2 For the user Important safety information 3 Description of the appliance 4 The control panel 4 Before use 7 Setting the water softener 7 Rinse aid 9 Using your appliance 10 Loading your appliance 10 Adjusting the height of the upper basket 12 Use of detergent 13 Hints and tips 14 W ashing programmes 15 Operating sequence 16 Maintenance and cleani ...
-
Zanussi ZD 699 ALU - page 3
3 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● Care must be taken to ensure that the appliance does not stand on the electrical supply cable. ● Any electrical work required to install this appliance should be carri ...
-
Zanussi ZD 699 ALU - page 4
4 1. Levelling spacers 2. Upper basket stop 3. Upper spray arm 4. Salt container 5. Large filter 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Central filter 11 . Lower spray arm 12. Upper basket 13. "SID" detergent dispenser 1. On/Off indicator light 2. On/Off push button 3. Indicator lights Open door ...
-
Zanussi ZD 699 ALU - page 5
5 5. Half load push button By pressing this push button, washing can be confined to a single basket. The indicator light corresponding to the selected basket comes on and for some programmes the prewash phase will be automatically excluded. This option is useful and economical when only a few dishes need washing. Remember to load all the dishes int ...
-
Zanussi ZD 699 ALU - page 6
6 Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing. Short "instruction accepted" signal When any of the push buttons are pressed, a short audible signal informs you that the machine has accepted the instruction given. Long "programme run" signal A continuous audi ...
-
Zanussi ZD 699 ALU - page 7
7 Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill the rinse aid dispenser . 6. Run a "Rinse ...
-
Zanussi ZD 699 ALU - page 8
8 Filling with salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher , especially table salt, will damage the water softener . Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water , whi ...
-
Zanussi ZD 699 ALU - page 9
9 Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser , which is positioned inside the door , holds about 1 10 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with rinse aid 1. Open the containe ...
-
Zanussi ZD 699 ALU - page 10
10 Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepa ...
-
Zanussi ZD 699 ALU - page 11
11 The cutlery basket Long bladed knives stored in an upright position are a potential hazard. These items should only be placed in the removable knife basket. T ake care when loading or unloading sharp items such as knives. Removable knife basket Long and/or sharp items of cutlery such as carving knives must be placed horizontally in the removable ...
-
Zanussi ZD 699 ALU - page 12
12 The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. If dishese are loaded in the upper basket, tilt them forwards. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces. Light items (plastic bowls etc.) ...
-
Zanussi ZD 699 ALU - page 13
13 Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Finish Double Action T ablets. Each tablet has the exact amount of detergent required, simply place in the dispenser . Finish Powder recommended for every day use. Finish Liqui ...
-
Zanussi ZD 699 ALU - page 14
14 T o save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "W ashing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. Do not prewash ...
-
Zanussi ZD 699 ALU - page 15
15 Programme Degree of soil and type of load Cycle description PRO14en W ashing programmes 2. INTENSIVE 70°C Heavy soil. Crockery , cutlery , pots and pans Normal soil. Crockery , cutlery , pots and pans Normal soil. Crockery and cutlery Light soil. Crockery and cutlery Light soil. Crockery and cutlery Light soil. Delicate china and glassware This ...
-
Zanussi ZD 699 ALU - page 16
16 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the On/Off push button The display will show the last selected programme and the corresponding phase indicator lights will illuminate. If the door is open also the "open door" indicator light will illuminate. 3. Check ...
-
Zanussi ZD 699 ALU - page 17
17 8b. Setting and starting the programme with "delay start" Once a programme and required options have been selected to use DELA Y proceed as follows: Press the DELA Y push button. The digital display will show "h 0". Press the button again to select the number of hours by which you wish to delay the programme start (up to a ma ...
-
Zanussi ZD 699 ALU - page 18
18 Internal cleaning Ensure that the seals around the door , the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant fo ...
-
Zanussi ZD 699 ALU - page 19
19 Check that the SID is not clogged with detergent residue. If necessary rinse it under running water after having removed it from the basket by twisting it anticlockwise and pulling it upwards. Fasten it back onto the support by turning it clockwise. Never use your dishwasher without the SID dispenser . Since SID also ensures correct distribution ...
-
Zanussi ZD 699 ALU - page 20
20 Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems. The dishwasher will not start or stops during operation, all push buttons are inoperative exc ...
-
Zanussi ZD 699 ALU - page 21
21 If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number . This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Protection against flooding The machine is fitted with a device in the bottom of the machine to prot ...
-
Zanussi ZD 699 ALU - page 22
22 Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour , materials or carriage on condition that: ● Th ...
-
Zanussi ZD 699 ALU - page 23
23 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 V ale, Guernsey Channel Islands JERSEY Jersey Electricity Company PO Box 45 Queens Road St Helier Jersey Channel Islands JE4 8NY SCOTLAND ABERDEEN 54 Claremont Street (M05) Aberdeen AB10 6RA AUCHTERMUCHY 33A Burnside (M03) Auchtermuchy Fife KY14 7AJ BLANTYRE Unit 5 (M07) Block 2 Auchenraith ...
-
Zanussi ZD 699 ALU - page 24
24 MIDLANDS BIRMINGHAM 66 Birch Road East, (M18) Wyrley Road Ind. Estate Witton Birmingham B6 6DB BOURNE Manning Road Ind. Estate (M44) Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St. Mary’ s Street (M72) Bridgnorth Shropshire WV16 4DR GLOUCESTER 101 Rycroft Street (M23) Gloucester GL1 4NB HEREFORD Unit 3 (M31) Bank Buildings Cattle market Harefor ...
-
Zanussi ZD 699 ALU - page 25
25 Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser . IST41en T est standard EN 50242 Reference programme: Bio 50°C with prewash Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage : 30 g in the dispenser UI48 US66 ...
-
Zanussi ZD 699 ALU - page 26
26 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water ...
-
Zanussi ZD 699 ALU - page 27
27 W ater outlet hose connection The end of the drain hose can be connected in the following ways: 1. T o the sink outlet siphon, securing it if necessary with a clip. 2. T o a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom ...
-
Zanussi ZD 699 ALU - page 28
28 Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted. Important The wires on the mains lead are coloured in accordance with the f ...
-
Zanussi ZD 699 ALU - page 29
29 This dishwasher is designed to be fitted under a kitchen counter or worksurface. It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through. The recess height may be anywhere bet ...
-
Zanussi ZD 699 ALU - page 30
30 The furniture door plinth The door on this appliance is designed for the overlay of a door plinth having the following dimensions: Width: 596 mm Height: 50 mm (min) - 120 mm (max) Thickness: 20 mm max The panel height should be no more than indicated, otherwise complete opening of the door will no longer be possible as the panel hits against the ...
-
Zanussi ZD 699 ALU - page 31
31 Fitting the vapour protection Fit the adhesive protection foil onto the front part of the worktop; along the entire width. Noise protection Adhesive noise protection ensures excellent noise insulation. This should be fitted when the dishwasher has been mounted in the recess and the height adjusted. Apply the protection as shown in the drawing, m ...
-
Zanussi ZD 699 ALU - page 32
© Electrolux Household Appliances Limited 2000 From the Electrolux Group. The world’ s No.1 choice. The Electrolux Group is the world’ s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are s ...
¿Tienes una pregunta acerca de Zanussi ZD 699 ALU?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Zanussi ZD 699 ALU, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Zanussi ZD 699 ALU probablemente compartirá una forma de solucionarlo.