-
IBM 07N4108 - page 1
OP T I ONS by I BM IBM 15/20.4/30 GB Ultra ATA/100 (EIDE) Hard Disk Drives User’s Guide Supplement The IBM 15 GB, 20.4 GB, and 30 GB Ultra ATA/100 (EIDE) Hard Disk Drives offer a choice of jumper configurations so that the drive will function properly on the widest range of computers. In some older computers, the BIOS (basic input/output syst ...
-
IBM 07N4108 - page 2
Troubleshooting If you follow the steps in the User ’ s Guide , and the configuration-setup program recognizes your drive at its true capacity, partition and format your drive using instructions given in the “ Partitioning and Formatting Your Drive ” section in the User ’ s Guide . If the configuration-setup program reports the drive capaci ...
-
IBM 07N4108 - page 3
Specifications Product warranties and notices 15 GB Drive 20.4 GB Drive 30 GB Drive Performance (all values typical averages): Read - seek time Rotational speed Buffer size 8.7 ms 7200 RPM 2 MB 8.7 ms 7200 RPM 2 MB 8.7 ms 7200 RPM 2 MB Part numbers: Option part number Drive part number Field Replaceable Unit (FRU) part number 19 ...
-
IBM 07N4108 - page 4
Machine - 15/20.4/30 GB Ultra ATA/100 (EIDE) Hard Disk Drive Option P/Ns: 19K4460, 19K4461, 00N8203 Warranty Period* - Three Years *Contact your place of purchase for warranty service information. Some IBM Machines are eligible for On-site warranty service depending on the country where service is performed. The IBM Warranty for Machines IBM warran ...
-
IBM 07N4108 - page 5
b. secure all programs, data, and funds contained in a Machine, c. provide IBM or your reseller with sufficient, free, and safe access to your facilities to permit them to fulfill their obligations, and d. inform IBM or your reseller of changes in a Machine's location. IBM is responsible for loss of, or damage to, your Machine while it is 1) i ...
-
IBM 07N4108 - page 6
The warranty does not cover the repair or exchange of a Machine resulting from misuse, accident, modification, unsuitable physical or operating environment, improper maintenance by you, or failure caused by a product for which IBM is not responsible. The warranty is voided by removal or alteration of Machine or parts identification labels. THESE WA ...
-
IBM 07N4108 - page 7
This limit also applies to IBM's suppliers and your reseller. It is the maximum for which IBM, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES (OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2) LOSS OF, OR DAMAGE TO ...
-
IBM 07N4108 - page 8
Herzegovina, Bulgaria, Croatia, Czech Republic, Federal Republic of Yugoslavia, Georgia, Hungary, Kazakhstan, Kirghizia, Former Yugoslav Republic of Macedonia (FYROM), Moldova, Poland, Romania, Russia, Slovak Republic, Slovenia, and Ukraine. The following terms apply to the country specified: EGYPT: Limitation of Liability: The following replaces i ...
-
IBM 07N4108 - page 9
UNITED KINGDOM: Limitation of Liability: The following replaces items 1 and 2 of the first paragraph of this Section: 1. death or personal injury or physical damage to your real property solely caused by IBM's negligence; 2. the amount of any other actual direct damages or loss, up to the greater of Pounds Sterling 150,000 or 125 percent of th ...
-
IBM 07N4108 - page 10
Avis de conformit é à la r é glementation d'Industrie Canada Cet appareil num é rique de classe B est conforme à la norme NMB-003 du Canada. European Union - emission directive This product is in conformity with the protection requirements of EU Council Directive 89/366/ECC on the approximation of the laws of the Member States relating to ...
-
IBM 07N4108 - page 11
Union Europea - Normativa EMC 1 1 ...
¿Tienes una pregunta acerca de IBM 07N4108?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con IBM 07N4108, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con IBM 07N4108 probablemente compartirá una forma de solucionarlo.