-
Radio Shack 43-3522 - page 1
FCC Statement 2 LIGHTNING 3 Installation 4 Selecting a Location 4 Using AC Power 4 Connecting the Phone 4 Connecting, Charging, And Replacing The Battery Pack 5 Attaching the Headset Holder 6 Connecting and Adjusting the Headset 7 Setting the Ringer 7 Setting the Dialing Mode 7 Using the Belt Clip 7 Using the Cord C lip 8 Operation 8 Making And Rec ...
-
Radio Shack 43-3522 - page 2
© 2001 RadioShack Corporation. All Ri ghts Reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. 43-3522/3523 OWNER’S MANUAL — Please read before using this equipment. 900 MHz Headset Phone Thank you for shopping at RadioShack. Your 90 0MHz Headset Phone gives yo u communication with both portability and conven ...
-
Radio Shack 43-3522 - page 3
2 The lightning symbol is intended to alert you to t he presence of uninsulated dangerous voltage within this product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case. The exclamation symbol is intended to inform you that important operating and main te nance instructions a ...
-
Radio Shack 43-3522 - page 4
3 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against ha rmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed ...
-
Radio Shack 43-3522 - page 5
4 INSTALLATION Selecting a Location You can place the phone on a desktop, shelf, or table. Select a location that is: • near an easily accessib le AC outlet • near a telephone line jack • out of the way of normal activities • away from electrical machinery , electrical appli ances, metal wall s, filing cabinets, wireless intercoms, security ...
-
Radio Shack 43-3522 - page 6
5 Plug the modular cord’s other end into a modular phon e line jack. Plug the supplied AC adapter’s barrel plug into the DC 12V 200mA jack on the back of the base. Plug the adapter into a standard AC outlet. Connecting, Charging, And Replacing The Battery Pack The phone comes with a rechargeable nickel-cadmium battery pack. You must connect the ...
-
Radio Shack 43-3522 - page 7
6 leave it on the base to charge the battery pack. • If you will not use you r phone for a long time, disconnect its battery pack. This helps increase the battery pack’ s life. The supplied battery pack sh ould last about a year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new 3. ...
-
Radio Shack 43-3522 - page 8
7 Connecting and Adjusting the Headset Insert the headset’s plug into the jack on the side of the remote keypad. Put on the headset, and adjust the band until it rests with almost no pressure on your ear a nd the top of your head. If the headset is loose, remove it and gently push the headset ba nd inward slightly to tighten it. If the headset is ...
-
Radio Shack 43-3522 - page 9
8 Using the Cord Clip Insert the cord into the cord clip’s hook, then attach the cord cl ip to your lapel or shirt to position the cord. OPERATION Making And Receiving Calls Before using the phone, put the headset on and adjust it as needed. To make a call, lift the remote keypad, then press T ALK/HAN G UP . You hear a dial tone, the TALK/LOW BAT ...
-
Radio Shack 43-3522 - page 10
9 • The redial memory can also store tone entries and pause entries. Using Mute Press MUTE to talk to someone else in the room without the person on the other end of the phone line hearing your conversation. You can still hear the person on the other end of the phone line. Press MUTE to resume your phone conversation. Using Flash Flash provides t ...
-
Radio Shack 43-3522 - page 11
10 2. Dial the desired number (u p to 16 digits). 3. Press and release MEM ag ain. 4. Press and release th e memory location number ( 0 - 9 ) to store the number . T wo long beeps sound, and the number is stored in memory . Use the memory index card at the bottom of the base to write the name in the respective memory location number on the memory i ...
-
Radio Shack 43-3522 - page 12
11 Tone Services on a Pulse Line” on Page 9). T esting Stored Emergency Numbers If you store an emergency service’s number (police department, fire department, or ambulance, for example) and you want to test the stored number, make the test call during the late evening or early morning to avoid peak demand periods. Remain on the line to explain ...
-
Radio Shack 43-3522 - page 13
09A01 43-3522/3523 Printed in China If additional p hones have been added to the li ne, recalculate the REN (see “FCC Statemen t” on Page 2). If you still have problems, disconnect the phone. If other phones on th e same line work properly, the fault is in this phone or its installati on. If you canno t find the problem, take the phone to your ...
¿Tienes una pregunta acerca de Radio Shack 43-3522?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Radio Shack 43-3522, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Radio Shack 43-3522 probablemente compartirá una forma de solucionarlo.