-
Jensen SD1413 - page 1
SD1413 AUX I N SD1413 AM/FM/CD/MP3/SD/USB RDS/ Receiver SERI ES Owner's Manual DI S P I D 3 AF T A PTY ...
-
Jensen SD1413 - page 2
SD1413 ii SERIES ...
-
Jensen SD1413 - page 3
SD1413 1 INTRODUCTION Contents Operating Instructions ............................... 2 T uner Operation ........................................ 5 CD Player Operation ................................. 8 MP3/WMA File Requirements ................. 10 MP3/WMA Operation ...............................1 2 Using a USB Device or SD Card ............. 15 ...
-
Jensen SD1413 - page 4
SD1413 2 OPERATING INSTRUCTIONS Power Press the power button (1) or any other button on the face of the receiver to turn the unit on when the ignition switch is on. Pr ess the power button again to turn the rece iver off. If the radio was left on when the ignition was last turned off, the receiver will turn on automatically when the ignition switch ...
-
Jensen SD1413 - page 5
SD1413 3 Select Press the AUDIO CONTROL button (4) to step through the menu of audio functions: volume (VOL), bass (BAS), treble (TRB), balance (BAL), fader (F AD), and volume (VOL). When adjusting audio functions, the unit will automatically exit select mode and return to the normal display after five seconds or when another function is activated. ...
-
Jensen SD1413 - page 6
SD1413 4 CONTROL to select from the following Beep T one options: • BEEP ALL: Beep is heard any time a button is pressed (function activated). • BEEP 2ND: Beep is heard only when a secondary function is activated (press and hold). • BEEP OFF: Beep is not heard. Liquid Crystal Display (LCD) The liquid crystal display (LCD) panel (8) displays t ...
-
Jensen SD1413 - page 7
SD1413 5 T UNER OPER ATION AM/FM Band Selector (BAND) Press the BAND button (5) during radio pla y to switch between three FM bands and o ne AM band. “F1”, “F2”, “F3” or “AM” will appear in the display to indicate the band currently selected. Tuning Automatic Tuning Press the >>| button (14) to tune upward in frequency and the ...
-
Jensen SD1413 - page 8
SD1413 6 Preset Stations Up to six stations on each band can be stored as presets and can then be instantly recalled by pressing the associated preset button on the front panel (19-24) or remote control. T o store a station, turn the radio on and select the desired band and station. Press and hold the desired preset button (numbered one through six ...
-
Jensen SD1413 - page 9
7 CLASSICS, Music Group Speech Group M1 POP , ROCK NEWS, AFFAIRS, INFO CUL TURE, SCIENCE, VARIED JAZZ, COUNTRY EASY , LIGHT SPORT , EDUCA TE, DRAMA NATION, OLDIES SOCIAL, RELIGION, PHONE IN FOLK TRAVEL, LEISURE, DOCUMENT M2 M3 M4 M5 M6 WEATHER,FINANCE, CHILDREN Button Number The current PTY code is displayed on the LCD , use the 6 preset buttons to ...
-
Jensen SD1413 - page 10
CD PLAY ER OPERATION Insert CD With the label surface facing up, gently insert the disc into the CD slot (1 1) until the soft- loading mechanism engages and pulls th e disc in. Disc play begins and “CDP PLA Y” will appear in the display . The track number and elapsed time appear in the display . Track Select T rack select features are used to q ...
-
Jensen SD1413 - page 11
Disc Repeat (RPT) Press the 3 RPT button (21) during disc play to continuously repeat the selected tra ck. “S-- RPT” will appear in the display . Press 3 RPT again to stop repeating. “S--RPT” will disappear from the display , and regu lar play will resume. The repeat function will also be canceled when activating the scan or shuffle functio ...
-
Jensen SD1413 - page 12
MP3/WMA FILE REQUIREMENTS MP3 and WMA (Windows Media Audio) music files are digital audio fi les that are compressed to allow more files on a single CD. This unit can play MP3/WMA directly from files contained on a CD-R/RW , U SB device or SD card using the buttons on the receiver (or remote control) as described below . Many types of software are ...
-
Jensen SD1413 - page 13
Entering ID3 Tag This unit supports ID3 tag versions 1.0 and 1.1. For the character codes, refer to the table below . Entering File and Folder Names Names using the code list characters are the only file names and folder names that can be entered and displayed. Other characters will not display correctly . The unit recognizes and plays only files w ...
-
Jensen SD1413 - page 14
MP3/WMA OPERATION Pause Press the 1 >/|| button (19) to suspend disc play . Press the play/pause button again to resume play . Track Select Press the >>| (14) or |<< (13) button for less than one second to advance to the next track on the disc, or press and hold to fast forward or fast reverse through the disc. Disc play starts when ...
-
Jensen SD1413 - page 15
Direct File Number Search Press the PS/AS button (17) to enter Direct T rack Search mode. The LCD will display "MP3 T" followed by a blinking asterisk. Refer to the Number column in T able 1 to enter a track number to play . If you enter a three-digit track number, the unit will search the track immediately . If you enter one or two digit ...
-
Jensen SD1413 - page 16
Display Information Press the DISP button (9) to display the clock or available ID3 informat ion, as follows: song title, directory name, artist name, etc. 14 SD1413 SERIES ...
-
Jensen SD1413 - page 17
USING A USB DEVICE OR SD CARD Loading a USB Device USB devices can be played through the USB connector on the front panel. T o access files on a USB device, insert the USB device as indicated below: After inserting an USB device containing MP3 or WMA files, “USB HOST” appears on the display and the unit will automatically scan the card for musi ...
-
Jensen SD1413 - page 18
REMOTE CONTROL The remote control will allow you to control the basic functions of your head unit. The remote control sensor is located on the left side of the front panel to the left of the 3 RPT button (3). Remote control functions are as follows: • S = Select (audio menu) • VOL / = V olume Up • VOL / = V olume Down • D = T une/Track Do ...
-
Jensen SD1413 - page 19
CARE AND MAINTENANCE CD Player The following guidelines will help you extend the life of your CD player: 1. When cleaning the vehicle interior , do not get water or cleaning fluids on the unit. 2. The CD player will not operate properly in extreme hot/cold or under damp conditions. In case of such conditions, wait until the vehicle interior reaches ...
-
Jensen SD1413 - page 20
T R OUBLESHOOTING Problem Cause Corrective Action Does not operate (display does not light) No power to yellow wire; no power to r ed wire Check c onnection with test light; chec k vehicle fuse with test light. Inline fuse blown Replace fuse. No power to unit Inline fuse blown Check/replace fuse. Not all speakers operate Incorrect splices or connec ...
-
Jensen SD1413 - page 21
SPECIFICATIONS CEA Power Ratings Power output: 13 watts RMS X 4 channels into 4-ohms @ < 1% THD+N Signal to noise ratio: 70dBA below refere nce. (Reference: 1 watt, 4-ohms) Frequency response: 20Hz to 20kHz (-3d B), Auxiliary input used as source reference Reference supply voltage: 14.4VDC CD Player Signal-to-noise ratio: >90dBA Frequency res ...
-
Jensen SD1413 - page 22
1 Audiovox Electronics Corporation (“the Company”) is committed to quality and customer service, and are pleased to offer you this W arranty . Please read it thoroughly and cont act the Compa ny at 1-800-323-4815 with any questions. Who is covered? The Company extends th is warranty to the original r etail purchaser of products purchased throug ...
-
Jensen SD1413 - page 23
SERI ES SERIE S Audiovox Electronics Corporation 150 Marcus Boulevard Hauppauge, NY 1 1788 1-800-323-4815 www . Jensen .com ©2009 Audiovox v .060209 N1049 4 10 R - 02 0 896 ...
¿Tienes una pregunta acerca de Jensen SD1413?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Jensen SD1413, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Jensen SD1413 probablemente compartirá una forma de solucionarlo.