-
Panasonic WV-NF302 - page 1
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Network Camera Operating Instructions Model No. WV -NF302 W V - N F 3 0 2 ...
-
Panasonic WV-NF302 - page 2
2 CONTENTS Preface ....................................................................................................................... ..... 3 About these operating instructions .............................................................................. 3 Trademarks and registered trademarks .................................................. ...
-
Panasonic WV-NF302 - page 3
3 Preface About these operating instructions There are 3 sets of operating instructions as follows. • Installation Guide • Operating instructions • Setup Instructions These operating instructions contain descriptions of how to operate this product* using a PC via a network and of how to configure the settings. Refer to the installation guide ...
-
Panasonic WV-NF302 - page 4
4 Monitor images on a PC The following are descriptions of how to monitor images from the camera on a PC. Monitor images from a single camera Important: • To enhance the security, change the password for the user "admin". It is recommended to change this password periodically. • When displaying multiple MPEG-4 images on a PC, images m ...
-
Panasonic WV-NF302 - page 5
5 <Refresh interval (MPEG-4)> • When "On" is selected for "MPEG-4 transmission" JPEG (VGA or QVGA): 15 fps JPEG (1 280 x 960): 5 fps • When "Off" is selected for "MPEG-4 transmission" JPEG (VGA or QVGA): 30 fps JPEG (1 280 x 960): 11 fps The refresh interval may be longer depending on a network envi ...
-
Panasonic WV-NF302 - page 6
6 t Image capture size buttons These buttons will be displayed only when a JPEG image is displayed. : The letters "VGA" will turn green and images in the main area will be displayed in VGA size. : The letters "QVGA" will turn green and images in the main area will be displayed in QVGA size. : The letters "1 280 x 960" ...
-
Panasonic WV-NF302 - page 7
7 !6 Audio output button * 3 Turns on/off the audio transmission (play audio from the PC on the camera speaker). This button will be displayed only when "Audio output", "Interactive (full duplex)" or "Interactive (half duplex)" is selected for "Audio mode" on the setup menu. ( ☞ Setup Instructions) The butt ...
-
Panasonic WV-NF302 - page 8
8 Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras) can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registere ...
-
Panasonic WV-NF302 - page 9
9 Record images on the SD memor y card manually Images displayed on the "Live" page can be recorded on the SD memory card manually. This button is operable only when "Manual" is selected for "Save trigger" on the setup menu. ( ☞ Setup Instructions) Images recorded on the SD memory card can be copied onto the PC. ( ? ...
-
Panasonic WV-NF302 - page 10
10 Action at an alarm occurrence The alarm action will be performed when the following alarms occur. Alarm type Terminal alarm: When connecting an alarm device such as a sensor to the EXT I/O connector on the of the camera, the alarm action (camera action at an alarm occurrence) will be performed when the connected alarm device is activated. VMD al ...
-
Panasonic WV-NF302 - page 11
11 T ransmit images onto an FTP ser ver Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available. Important: • When using this function, set the user name and the password to access the FTP s ...
-
Panasonic WV-NF302 - page 12
12 Save images on the SD memory card when images fail to transmit using the FTP periodic transmission function Images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD mem- ory card. Images saved on the SD memory card can be obtained from the [SD memory card] tab of the "Basic" page. ( ? ...
-
Panasonic WV-NF302 - page 13
13 Display the log list The following logs can be displayed in list form. • Alarm log: Logs of the alarm occurrences such as time and date of the alarm occurrences and the alarm type will be displayed. • Manual log: Logs filed when images have been recorded on the SD memory card will be displayed. • FTP trans. error log: Logs filed when the F ...
-
Panasonic WV-NF302 - page 14
14 Log list displayed in the log list win- dow [Number of the listed logs] Total number of the logs of the selected log type and a number of the log being displayed on the top of the log list will be displayed. Note: Enter the desired log number and press the [Enter] key on the keyboard. The log of the designated number will be displayed on the top ...
-
Panasonic WV-NF302 - page 15
15 [Download] button Click this button to download all logs of the selected log list as a file onto the PC. [Close] button Click this button to close the log list window. ...
-
Panasonic WV-NF302 - page 16
16 Playback of images saved on the SD memor y card When clicking a time and date listed on the log list window, the "Live" page will turn to the "Playback" page. When images associated with the clicked time and date are on the SD memory card, the first image of them will be displayed. Important: • Refresh interval of images ma ...
-
Panasonic WV-NF302 - page 17
17 [STOP] button Playback will stop and the "Playback" window will turn to the "Live" page. [NEXT IMAGE] button The next frame will be displayed and paused when this button is clicked during playback. Each time this button is clicked during pausing, the frame next to the currently displayed frame will be dis- played. Note: When ...
-
Panasonic WV-NF302 - page 18
18 About the network security of the camera Equipped security functions The following security functions are featured in this camera. q Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and/or the user authentication to "On&qu ...
-
Panasonic WV-NF302 - page 19
19 Viewing Help If you want to know anything about operation or setup methods on screen, display the "Help" screen. Displaying the Help screen Setup screen Help screen Step 1 Click the [Setup] button. → The setup screen is displayed. Clicking an underlined item win display the "Help" pop-window. If is possible to configure the ...
-
Panasonic WV-NF302 - page 20
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca © 2007 Matsushita El ...
¿Tienes una pregunta acerca de Panasonic WV-NF302?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Panasonic WV-NF302, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Panasonic WV-NF302 probablemente compartirá una forma de solucionarlo.