Español dropdown-ico

Manual de instrucciones Cabletron Systems 9A656-04 ATM Module

44 de páginas 0.61 mb
Descargar

Pasar a la página of 44

Summary
  • Cabletron Systems 9A656-04 ATM Module - page 1

    9032031-01 SmartSwitch 9500 9A656-04 ATM Module Hardware and Installation Guide ...

  • Cabletron Systems 9A656-04 ATM Module - page 2

    ...

  • Cabletron Systems 9A656-04 ATM Module - page 3

    i Notice Notice Cabletron Systems r eserves the right to make changes in speciÞcations and other information contained in this document without prior notice. The reader should in all cases consult Cabletr on Systems to determine whether any such changes have been made. The hardwar e, Þrmware, or softwar e described in this manual is subject to ch ...

  • Cabletron Systems 9A656-04 ATM Module - page 4

    Notice ii FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference r eceived, including interference that may cause undesir ed operation. NOTE: This equipment has been tested and found to c ...

  • Cabletron Systems 9A656-04 ATM Module - page 5

    iii Notice Dec laration of Conf ormity Application of Council Directive(s): 89/336/EEC 73/23/EEC Manufacturer Õs Name: Cabletron Systems, Inc. Manufacturer Õs Address: 35 Industrial W ay PO Box 5005 Rochester , NH 03867 European Repr esentative Name: Mr . J. Solari European Repr esentative Address: Cabletron Systems Limited Nexus House, Newbury B ...

  • Cabletron Systems 9A656-04 ATM Module - page 6

    Notice iv ...

  • Cabletron Systems 9A656-04 ATM Module - page 7

    v Contents Chapter 1 Intr oduction Document Objectives .................................................................................................... 1-1 Overview ........................................................................................................................ 1-2 Features................................................ ...

  • Cabletron Systems 9A656-04 ATM Module - page 8

    Contents vi Chapter 4 LANVIEW LEDs ANIM LEDs ............................................................................................................ 4-3 Chapter 5 General Specifications Operating SpeciÞcations .............................................................................................. 5-1 Environmental Requir ements ...... ...

  • Cabletron Systems 9A656-04 ATM Module - page 9

    1-1 Chapter 1 Intr oduction Document Objectives This document, the SmartSwitch 9500 9A656-04 A TM Module Hardwar e and Installation Guide , contains introductory , installation and speciÞcation information for the support of the 9A656-04 SmartSwitch Module. Use this guide to learn about the following topics: ¥ Overview of the 9A656-04 ¥ Installi ...

  • Cabletron Systems 9A656-04 ATM Module - page 10

    Introduction 1-2 Overview The 9A656-04 (shown in Figure 1-1) is a 4.5 Gbps, single slot module for the SmartSwitch 9500 chassis. Up to four A TM Network Interface Modules (ANIMs) of any type can be plugged into the 9A656-04 to provide fr ont panel connectivity to the network. Cabletron Systems ANIMs can support up to 622 Mbps of bandwidth per port. ...

  • Cabletron Systems 9A656-04 ATM Module - page 11

    1-3 Ov er view Figure 1-1. The 9A656-04 AN AN AN AN 2031_01 ...

  • Cabletron Systems 9A656-04 ATM Module - page 12

    Introduction 1-4 Features The features of the 9A656-04 ar e described in the sections below: Pr ocessor The 9A656-04 is equipped with an advanced Intel i960 micropr ocessor . This micropr ocessor provides signalling, SNMP management, and serves as the in-band management LAN Emulation Client (LEC). Cabletr on Systems ASICs The 9A656-04 contains Þve ...

  • Cabletron Systems 9A656-04 ATM Module - page 13

    1-5 Related Manuals LANVIEW LEDs The 9A656-04 uses LANVIEW , The Cabletron Systems built-in visual diagnostic and status monitoring system. W ith LANVIEW LEDs, you can quickly identify the device, port, and physical layer status at a glance. Related Manuals The manuals listed below should be used to supplement the procedur es and technical data con ...

  • Cabletron Systems 9A656-04 ATM Module - page 14

    Introduction 1-6 Getting Help For additional support related to this de vice or document, contact the Cabletron Systems Global Call Center: Before calling the Cabletron Systems Global Call Center , ha ve the follo wing information ready: • Y our Cabletron Systems service contract number • A description of the failure • A description of any ac ...

  • Cabletron Systems 9A656-04 ATM Module - page 15

    2-1 Chapter 2 Installing the 9A656-04 Module SmartSwitch 9500 modules can be installed in any of the slots that are available. T o install a module, proceed as follows: 1. Remove the blank plate covering the slot in which the 9A656-04 will be installed. All other slots must remain cover ed to ensure pr oper airßow and cooling. (Save the blank plat ...

  • Cabletron Systems 9A656-04 ATM Module - page 16

    Installing the 9A656-04 Module 2-2 Figure 2-1. Installing the 9A656-04 2031_02 AN AN AN AN Circuit Card Card Guides Metal Back-Panel Plastic Locking T ab Plastic Locking T ab ...

  • Cabletron Systems 9A656-04 ATM Module - page 17

    2-3 The Reset Switch The Reset Switch The Reset switch is located on the front panel, under the top plastic tab as shown in Figure 2-2. It serves two functions: ¥ Pressing the Reset switch twice within thr ee seconds causes the processor (i960) to reset. ¥ Pressing and holding the switch on for thr ee or more seconds causes the module to shutdown ...

  • Cabletron Systems 9A656-04 ATM Module - page 18

    Installing the 9A656-04 Module 2-4 The Module Car d DIP Switch An eight position DIP switch is located on the module car d as shown in Figure 2-3. The functions of the switches ar e listed in T able 2-1. ! CA UTION Do not toggle Switch 8 unless you intend to reset the user configured pass words to their f actor y default settings . Do not toggle S ...

  • Cabletron Systems 9A656-04 ATM Module - page 19

    2-5 Installing an ANIM Installing an ANIM Figure 2-3 shows the location of the 4 motherboar d connectors, and the 16 standoff scr ews for the A TM Network Interface Modules (ANIMs). Figure 2-3 also shows the location of the Module Card DIP Switch. Figure 2-3. ANIM Connector Locations and Module DIP Switch Location ANIM Connectors (4) Standoff Screw ...

  • Cabletron Systems 9A656-04 ATM Module - page 20

    Installing the 9A656-04 Module 2-6 The 9A656-04 module is shipped without ANIMs. T o install the ANIMs proceed as follows: 1. Remove the module if it is installed in the SmartSwitch 9500 chassis. T o remove a module, r elease (rotate outwar d) the top and bottom plastic locking tabs, then slide the module out of the chassis. 2. Refer to Figure 2-4. ...

  • Cabletron Systems 9A656-04 ATM Module - page 21

    2-7 Installing an ANIM 5. Press straight down Þrmly on the ANIM until the pins slide all the way into the motherboard connector . Ensure that the ANIM seats ßush on the standoffs. 6. Secure the ANIM with the two screws saved in step 2 and the two screws supplied with each ANIM. 7. If there is mor e than one ANIM to install, repeat steps 2 thr oug ...

  • Cabletron Systems 9A656-04 ATM Module - page 22

    Installing the 9A656-04 Module 2-8 ...

  • Cabletron Systems 9A656-04 ATM Module - page 23

    3-1 Chapter 3 Operation The 9A656-04 provides switching between the fr ont panel interfaces (ANIMs) and the Cell T ransfer Matrix backplane located inside the SmartSwitch 9500 chassis. Figure 3-1 shows the traf Þc ßow of A TM cells in the 9A656-04. The following sections brießy describe the functions of the i960 Processor , the ASICs, the CTM an ...

  • Cabletron Systems 9A656-04 ATM Module - page 24

    Operation 3-2 A TM Cell T raffic Flo w in the 9A656-04 The 9A656-04 SmartSwitch utilizes several innovative features that r esult in a completely redundant, fault-tolerant design. The thr ee most important hardwar e facets of the 9A656-04 SmartSwitchÕs features ar e the Cell T ransfer Matrix, Cabletron Systems ASICs, and the i960 HD RISC Processo ...

  • Cabletron Systems 9A656-04 ATM Module - page 25

    3-3 A TM Cell T raffic Flow in the 9A656-04 CTM (Cell T ransfer Matrix) ASICs The 9A656-04 has seven CTM ASICs that provide two interfaces each between the TDM Bus and the CTM Backplane located in the SmartSwitch 9500 chassis. Each interface is a full-duplex connection with a raw throughput capacity of 2 Gbps. In addition, the CTM ASICs perform al ...

  • Cabletron Systems 9A656-04 ATM Module - page 26

    Operation 3-4 System Management Buses There ar e two management channels within the SmartSwitch 9500 system: ¥ SMB-1 ¥ SMB-10 These buses provide out-of-band management and inter -module management communication. SMB-1 Bus The SMB-1 is a 1 Mbps management bus located within the SmartSwitch 9500 chassis. This bus is used by all diagnostic controll ...

  • Cabletron Systems 9A656-04 ATM Module - page 27

    3-5 System Diagnostic Controller System Diagnostic Contr oller This diagnostic controller is composed of a Z-80 micr oprocessor and its supporting logic. The diagnostic controller performs the following: ¥ Controls the power -up sequencing of modules ¥ Monitors the 9A656-04 input and output power parameters ¥ Keeps watch over the main host proce ...

  • Cabletron Systems 9A656-04 ATM Module - page 28

    Operation 3-6 ...

  • Cabletron Systems 9A656-04 ATM Module - page 29

    4-1 Chapter 4 LANVIEW LEDs The front panel LANVIEW LEDs indicate the status of the module and may be used as an aid in troubleshooting. Shown in Figur e 4-1 are the LANVIEW LEDs of the 9A656-04 module. Refer to T able 4-1 for the full deÞnitions of 9A656-04 LED states. Figure 4-1. 9A656-04 LANVIEW LEDs System Status SMB Status 2031_09 9A656-04 ...

  • Cabletron Systems 9A656-04 ATM Module - page 30

    LANVIEW LEDs 4-2 T able 4-1. SMB and CPU LEDs LED LED Color State DeÞnition SMB Green Functional Fully operational Amber Crippled Not fully operational (i.e., one bad port) Off Power off Module powered of f CPU Amber/Green Booting LED blinks amber and green while booting Red (Flashing) Failed Fatal error has occurr ed Off Power off Module powered ...

  • Cabletron Systems 9A656-04 ATM Module - page 31

    4-3 ANIM LEDs The front panel LANVIEW LEDs indicate the status of the ANIM and may be used as an aid in troubleshooting. Shown in Figur e 4-2 are the LANVIEW LEDs of all ANIMs. Although there ar e several types of ANIMs, all share the same LANVIEW LEDs. Refer to T able 4-2 for the full deÞnitions of ANIM LED states. Figure 4-2. ANIM LEDs T able 4- ...

  • Cabletron Systems 9A656-04 ATM Module - page 32

    LANVIEW LEDs 4-4 ...

  • Cabletron Systems 9A656-04 ATM Module - page 33

    5-1 Chapter 5 General Specifications The speciÞcations for the 9A656-04 are detailed in the sections that follow . Operating Specifications En vironmental Requirements Operating T emperature 5¡C to 40¡C (41¡F to 104¡F) Storage T emperature: -30¡C to 73¡C (-22¡F to 164¡F) Operating Relative Humidity: 5% to 90% (non-condensing) Regulatory ...

  • Cabletron Systems 9A656-04 ATM Module - page 34

    General Specifications 5-2 Ph ysical Dimensions 35.0 D x 44.0 H x 3.0 W centimeters (13.8 D x 17.4 H x 1.2 W inches) W eight Unit: 1.36 kg. (3lb) Shipping: 1.81 kg. (4lb) De vice Specifications Processor Intel i960HD RISC processor contr ol Dynamic Random Access Memory (DRAM) 96 MB FLASH Memory 8 MB ANIM Specifications The 9A656-04 uses A TM Net ...

  • Cabletron Systems 9A656-04 ATM Module - page 35

    5-3 ANIM Specifications ANIM-21/3 The ANIM-21/3 provides a multimode Þber connection using a Duplex SC connector and a line rate of 155.52 Mbps. The speciÞcations for the ANIM-21/3 are listed in T able 5-1. Figure 5-1. ANIM-21/3 T able 5-1. ANIM-21/3 Specifications Parameter SpeciÞcation Number of Interfaces 3 Line Rate 155.52 Mbps Interface T ...

  • Cabletron Systems 9A656-04 ATM Module - page 36

    General Specifications 5-4 ANIM-29/3 The ANIM-29/3 provides a single mode Þber connection using a Duplex SC connector with a line rate of 155.52 Mbps. The speciÞcations for the ANIM-29/3 are listed in T able 5-2. Figure 5-2. ANIM-29/3 T able 5-2. ANIM-29/3 Specifications Parameter SpeciÞcation Number of Interfaces 3 Line Rate 155.52 Mbps Inter ...

  • Cabletron Systems 9A656-04 ATM Module - page 37

    5-5 ANIM Specifications ANIM-29/3LR The ANIM-29/3LR provides a single mode Þber connection using a Duplex SC connector with a line rate of 155.52 Mbps. The speciÞcations for the ANIM-29/3LR are listed in T able 5-3. Figure 5-3. ANIM-29/3LR T able 5-3. ANIM-29/3LR Specifications Parameter SpeciÞcation Number of Interfaces 3 Line Rate 155.52 Mbp ...

  • Cabletron Systems 9A656-04 ATM Module - page 38

    General Specifications 5-6 ANIM-31/2 The ANIM-31/2 provides a multimode Þber connection using a Duplex SC connector with a line rate of 622 Mbps. The speciÞcations for the ANIM-31/2 are listed in T able 5-4. Figure 5-4. ANIM 31/2 T able 5-4. ANIM-31/2 Specifications Parameter SpeciÞcation Number of Interfaces 2 Line Rate 622 Mbps Interface T y ...

  • Cabletron Systems 9A656-04 ATM Module - page 39

    5-7 ANIM Specifications ANIM-39/2 The ANIM-39/2 provides a single mode Þber connection using a Duplex SC connector with a line rate of 622 Mbps. The speciÞcations for the ANIM-39/2 are listed in T able 5-5. Figure 5-5. ANIM 39/2 T able 5-5. ANIM-39/2 Specifications Parameter SpeciÞcation Number of Interfaces 2 Line Rate 622 Mbps Interface T yp ...

  • Cabletron Systems 9A656-04 ATM Module - page 40

    General Specifications 5-8 ANIM-39/2LR The ANIM-39/2LR provides a single mode Þber connection using a Duplex SC connector with a line rate of 622 Mbps. The speciÞcations for the ANIM-39/2LR are listed in T able 5-6. Figure 5-6. ANIM 39/2LR T able 5-6. ANIM-39/2LR Specifications Parameter SpeciÞcation Number of Interfaces 2 Line Rate 622 Mbps I ...

  • Cabletron Systems 9A656-04 ATM Module - page 41

    5-9 ANIM Specifications ANIM-67/2 The ANIM-67/2 provides a coaxial cable connection using BNC connectors with a line rate of 45 Mbps. The speciÞcations for the ANIM-67/2 are listed in T able 5-7. Figure 5-7. ANIM-67/2 T able 5-7. ANIM-67/2 Specifications Parameter SpeciÞcation Number of Interfaces 2 Line Rate 45 Mbps Interface T ype BNC Media T ...

  • Cabletron Systems 9A656-04 ATM Module - page 42

    General Specifications 5-10 ANIM-77/2 The ANIM-77/2 provides a coaxial cable connection using BNC connectors with a line rate of 34 Mbps. The speciÞcations for the ANIM-77/2 are listed in T able 5-8. Figure 5-8. ANIM-77/2 T able 5-8. ANIM-77/2 Specifications Parameter SpeciÞcation Number of Interfaces 2 Line Rate 34 Mbps Interface T ype BNC Med ...

  • Cabletron Systems 9A656-04 ATM Module - page 43

    5-11 ANIM Specifications ANIM-22/4 The ANIM-22/3 provides a Category 5 UTP connection using four RJ45 connectors with a line rate of 155.52 Mbps. The speciÞcations for the ANIM-22/4 are listed in T able 5-9. Figure 5-9. ANIM 22/4 T able 5-9. ANIM-22/4 Specifications Parameter SpeciÞcation Number of Interfaces 4 Line Rate 155.52 Mbps Interface T ...

  • Cabletron Systems 9A656-04 ATM Module - page 44

    General Specifications 5-12 ...

Fabricante Cabletron Systems Categoría Cell Phone

Los documentos del dispositivo Cabletron Systems 9A656-04 ATM Module que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Cabletron Systems
- manuales de instrucciones 9A656-04 ATM Module
- hojas de producto Cabletron Systems
- folletos informativos
- o etiquetas energéticas Cabletron Systems 9A656-04 ATM Module
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Cabletron Systems 9A656-04 ATM Module.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Cabletron Systems 9A656-04 ATM Module, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Cabletron Systems 9A656-04 ATM Module. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Cabletron Systems 9A656-04 ATM Module.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Cabletron Systems 9A656-04 ATM Module, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Cabletron Systems 9A656-04 ATM Module. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Cabletron Systems 9A656-04 ATM Module.

El manual de instrucciones completo de Cabletron Systems debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Cabletron Systems 9A656-04 ATM Module - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Cabletron Systems 9A656-04 ATM Module, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Cabletron Systems 9A656-04 ATM Module que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Cabletron Systems 9A656-04 ATM Module - que deben facilitarnos los primeros pasos durante el uso de Cabletron Systems 9A656-04 ATM Module
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Cabletron Systems 9A656-04 ATM Module
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Cabletron Systems 9A656-04 ATM Module en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Cabletron Systems 9A656-04 ATM Module?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Cabletron Systems 9A656-04 ATM Module, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Cabletron Systems 9A656-04 ATM Module probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)