-
Teac CDX10I - page 1
9A10495701 Z Micr o Hi-Fi System OWNER’S MANUAL CD - X1 0 i Includes adapters for: iPod nano iPod with video iPod mini iPod with Click Wheel iPod with color display Adapters sold separately: iPod with dock connector ...
-
Teac CDX10I - page 2
2 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s encl ...
-
Teac CDX10I - page 3
3 This product has been designed and manufactured according to FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968“, and is classified as class 1 laser product. There is not hazardous invisible laser radiation during operation because invisible laser radiation emitted inside ...
-
Teac CDX10I - page 4
4 Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Using the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connections . . . . . . . . . . . . . . . . . . . . . ...
-
Teac CDX10I - page 5
5 Discs Discs which can be played on this unit: • Conventional audio CDs bearing the COMPACT DISC DIGITAL AUDIO logo on the label: • Properly finalized CD-R and CD-RW discs Note: < Depending on the quality of the disc and/or the condition of the recording, some CD-R/CD-RW discs may not be playable. < Copy-protected discs and other discs t ...
-
Teac CDX10I - page 6
6 Connections Speaker (R) FM antenna AM antenna Speaker (L) Subwoofer Side panel of the main unit Dock A C B D F E G CAUTION: Make sure to fasten the Dock’ s cable with this clip. CAUTION < Turn off the power of all the equipment before making connections. < Read instructions of each component you intend to use with this unit. < Be sure ...
-
Teac CDX10I - page 7
7 SPEAKERS Connect the left speaker’s plug to L, and the right speaker’s plug to R. < If not using the included speakers, make sure the speakers you use are at least 4 Ω impedance. < Do not connect anything other than speakers to these terminals. AC Power Cord Be sure to connect the power cord to an AC outlet which supplies the correct v ...
-
Teac CDX10I - page 8
8 Unit Functions D A B C E F G H J A C D M N Q O B E H I K L T R S V U W J I P ...
-
Teac CDX10I - page 9
9 FM MODE In FM TUNER mode, use this button to select stereo or monaural. PRESET/SCROLL In TUNER mode, use these buttons to select a preset station. In iPod mode, use these buttons to scroll up and down the menu. MENU This button is equivalent to the MENU button on your iPod. In iPod mode, use this button to go back to the previous menu. TREBLE Use ...
-
Teac CDX10I - page 10
10 W all Mounting You can mount the main unit and/or the left and right speakers on a wall. Precautions < Pay attention to the length of cables. iPod Dock: 39” (1m) Speaker and Subwoofer cables: 118” (3m) Do not attempt to mount the main unit and the speakers too far from the subwoofer and the Dock. < Drill holes into solid wall support, ...
-
Teac CDX10I - page 11
11 The CD-X10i comes mounted with an adapter for iPod with color display (40GB, 60GB), “60GB (color) + Photo 40GB/60GB”. To play your iPod through the CD-X10i, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below. 1. Remove the adapter from ...
-
Teac CDX10I - page 12
12 Basic Operation 2 3 4 1 The ring surrounding the STANDBY/ON button lights when the unit is on. < To listen to an external source connected to the AUX IN jack, select AUX. < In iPod and AUX modes, the display always shows the clock and the volume level. < If you press and hold the TIME SET button for 3 seconds in CD or TUNER mode, the cl ...
-
Teac CDX10I - page 13
13 Muting To mute the sound temporarily, press the MUTING button. Press the MUTING button again to restore the sound. Headphones For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume using the VOLUME buttons. The sound from the speakers is cut off while ...
-
Teac CDX10I - page 14
14 Listening to iPod Select “iPod” using the FUNCTION button. If an iPod is already docked, playback will start. In iPod mode, press the Play/Pause button ( G / J ) to start or pause playback. Insert the iPod into the Dock of the CD-X10i. Then press the Play/Pause button ( y / J ) on the iPod. The CD-X10i will automatically turn on and start pl ...
-
Teac CDX10I - page 15
15 T o activate the shuffle mode During playback, press the SHUFFLE button to change the shuffle mode. Each time the SHUFFLE button is pressed, the SHUFFLE setting of iPod is changed as follows: If iPod is set to shuffle songs or albums, the Shuffle icon ( ) appears in the iPod’s display. albums songs off Select the menu item Press the PRESET/SCR ...
-
Teac CDX10I - page 16
16 Listening to CD 4 2 1 3 5 Press the FUNCTION button to select “CD”. 1 Press the OPEN/CLOSE button. 2 Put a disc onto the center spindle of the player with the label side facing you. Press the disc onto the spindle until a slight “click” is heard indicating the disc is mounted correctly. 3 < Never put more than one disc in the mechanis ...
-
Teac CDX10I - page 17
17 T o suspend playback temporarily (pause mode) Press the Play/Pause button ( G / J ) during playback. Playback stops at the current position. To resume playback, press the Play/Pause button ( G / J ) again. T o stop playback Press the Stop button ( H ) to stop playback. T o skip to the next or a previous track During playback, press the skip butt ...
-
Teac CDX10I - page 18
18 MEMORY FUNCTION Up to 32 tracks can be programmed in the desired order. If another source is selected, select “CD” using the FUNCTION button. 1 Press the MEMORY button. 2 The MEMORY indicator blinks on the display. < To cancel the program mode, press the Stop button ( H ). Programmed Playback (CD only) Shuffle Playback (CD) The tracks can ...
-
Teac CDX10I - page 19
19 T o check the programmed or der In the stop mode, press the MEMORY button repeatedly. The track number and program number will be shown on the display. T o add a track to the end of the program In the stop mode, press the MEMORY button repeatedly until “ -- ” appears on the display. Select a track number using the Skip button ( . or / ) and ...
-
Teac CDX10I - page 20
20 Connect the PHONES jack (audio output jack) of a portable audio player to the AUX IN jack of the CD-X10i using the supplied stereo mini plug cable. 1 Listening to an Exter nal Source Play the source, and adjust the volume using the VOLUME buttons of the CD-X10i and of the audio player. 3 Press the FUNCTION button to select “AUX”. 2 2 3 1 Whe ...
-
Teac CDX10I - page 21
21 Listening to the Radio 2 3 1 Press the FUNCTION button to select “TUNER”. 1 < You can also use the FM/AM button to select “TUNER”. Press the FM/AM button to select a band. 2 Select the station you want to listen to (auto selection). 3 Hold down the Skip button ( . or / ) until the frequency display begins to change. When a station is ...
-
Teac CDX10I - page 22
22 Preset T uning You can program 10 FM & 10 AM channel presets. If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. Tune in a station you want to listen to (see steps to of page 21). 3 1 1 Press the MEMORY button. 2 Within 5 seconds, press the MEMORY button. 4 The ...
-
Teac CDX10I - page 23
23 Setting the Clock If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. If the unit is on, press the STANDBY/ON switch to turn it standby 1 Press the TIME SET button once more. The “hour” value blinks. 3 Press the SKIP button ( . / / ) to set the current hour. 4 P ...
-
Teac CDX10I - page 24
24 Setting the Timer < The unit can be programmed to turn on and off at a specified time. < Adjust the clock before setting the timer. Press and hold the TIMER button for more than 2 seconds and release it when the “hour” value starts blinking. 1 “TIMER” and “ON” indicators appear on the display. < When no button is pressed for ...
-
Teac CDX10I - page 25
25 Press the SKIP button ( . / / ) to set the volume, and then press the TIMER button. 7 The clock and the TIMER indicator are displayed. The unit will turn on and off at the specified time every day. Don’t forget to turn the unit off (standby), or the timer won’t work. < Playback volume will gradually increase up to your set volume when the ...
-
Teac CDX10I - page 26
26 If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is ...
-
Teac CDX10I - page 27
27 Specifications AMPLIFIER section Output Power (L+R) . . . . . . . . . . . . . . . . . . . . . . . 5 W + 5 W Output Power (Subwoofer) . . . . . . . . . . . . . . . . . . . . . . 15 W Input Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mV Frequency Response . . . . . . . . . . . . . . . . . . . 50 to 20,000 Hz TUNER Sec ...
-
Teac CDX10I - page 28
Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 Phone: (323) 72 ...
¿Tienes una pregunta acerca de Teac CDX10I?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Teac CDX10I, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Teac CDX10I probablemente compartirá una forma de solucionarlo.