-
Fusion NVSW12 - page 1
NV SERIES SUBWOOFER MODELS NV– SW12, NV– SW15 ...
-
Fusion NVSW12 - page 2
2 2 2 NV SERIES Embrace the ultimate in power . The NV Series is the pinnacle of modern car audio. State of the art engineering ensures the most refined sound available is delivered at unparalleled levels. The NV Series represents the finest work FUSION has achieved; designed and manufactured to the highest level with no compromises. T o optimise ...
-
Fusion NVSW12 - page 3
3 3 3 T ABLE OF CONTENTS • SUBWOOFER FEA TURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 4 • SUBWOOFER THEILE/SMALL P ARAMETERS . . . . . . . . . . . . . . . . . . . . . . pg 5 • SUBWOOFER DIMENSIONS NV -SW12 . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 6 • SUBWOOFER DIMENSIONS NV -SW15 . . . . ...
-
Fusion NVSW12 - page 4
4 4 4 SUBWOOFER FEA TURES FUSION subwoofers are low frequency drivers capable of delivering extremely high bass levels from small enclosures. In order to achieve the maximum performance from your new FUSION Subwoofer , please use one of the recommended size enclosures that best suits your application. Sealed and vented enclosure sizes can be found ...
-
Fusion NVSW12 - page 5
5 5 5 SUBWOOFER THEILE/SMALL P ARAMETERS Subwoofer Parameters NV-SW12 NV-SW15 MAX Power Rating (W atts) 2000 2500 RMS Power Rating (W atts) 1000 1100 Coil Height (Hvc) (mm) 40 40 Compliance (Cms) (uM/N) 180.8 146.18 Cone Area (Sd) 47.92 77.93 D.C.Coil Resistance (Re) 0.94 0.88 Electrical Q (Qes) 0.47 0.552 Force Factor (BL) 8.53 8.4 Free Air Resona ...
-
Fusion NVSW12 - page 6
6 6 6 SUBW00FER NV-SW12 DIMENSIONS 294mm (11– 5/8") 204mm (8 – 1/16") 227mm (8 – 15/16") 333mm (13 –1/8") 333mm (13 –1/8") 333mm (13 –1/8") ...
-
Fusion NVSW12 - page 7
7 7 7 SUBWOOFER NV-SW15 DIMENSIONS 410mm (16 –1/8") 410mm (16 –1/8") 410mm (16 –1/8") 366mm (14 –7/8") 219mm (8–5/8") 246mm (9–11/16") ...
-
Fusion NVSW12 - page 8
8 8 8 ENCLOSURES All enclosures include port and subwoofer displacement. All ports are circle aero ports unless otherwise stated. Ported Enclosures: A ported enclosure is generally larger than a sealed enclosure Sealed Enclosures: A sealed enclosure will be the smallest enclosure you can build. It will have a tight low frequency response, but not a ...
-
Fusion NVSW12 - page 9
9 9 9 ENCLOSURE CONSTRUCTION All enclosures should be constructed from 18mm (3/4”) Medium Density Fibre board. Enclosures should be glued and screwed, because MDF is porous. FUSION recommends sealing the internal sides with a polyurethane sealer prior to installation. T o accurately cut the subwoofer hole use the unique FUSION ruler guide include ...
-
Fusion NVSW12 - page 10
10 10 10 5 10 50 100 500 1000 20 K 88 82 94 100 106 112 118 124 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 88 82 94 100 106 112 118 124 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts PORTED SUBWOOFER NV-SW12 ...
-
Fusion NVSW12 - page 11
11 11 11 5 10 50 100 500 1000 20 K 89 83 95 101 107 113 119 125 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1500 watts SEALED 5 10 50 100 500 1000 20 K 89 83 95 101 107 113 119 125 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1500 watts PORTED SUBW00FER NV-SW15 ...
-
Fusion NVSW12 - page 12
12 12 12 TECH TIPS OHMS LA W SIMPLIFIED IR E voltage watt s amperage curren t resistance R I W E I E 2 W W I 2 E 2 R I 2 R W E E R WR W I W/R EI POWER CABLE CALCULA TOR TOT AL AMPERAGE 0-4 FT 4-7 FT 7-10 FT 10 -13 FT 13-16 FT 16-19 FT 19-22 FT 22-28 FT 0 – 20 14 12 12 10 10 8 8 8 20 – 35 12 10 8 8 6 6 6 4 35 – 50 10 8 8 6 4 4 4 4 50 – 65 8 ...
-
Fusion NVSW12 - page 13
13 13 13 SUBWOOFER RULER GUIDE Use the FUSION ruler guide to create a perfect subwoofer mounting surface. 1 : Mark the centre position on the MDF (Medium Density Fibre) board where the subwoofer is to be mounted. 2 : Fix the first hole (centre) to the marked out position on the MDF . 1 2 3 4 6 7 8 9 11 12 13 14 16 (inch) (mm) Centre 1 " 0 cut ...
-
Fusion NVSW12 - page 14
14 14 14 5 : Using a jigsaw or router , cut out this measurement. 3 : Insert a pencil into the correct subwoofer cut out measurement. 10", 12", or 15". 1 2 3 4 6 7 8 9 11 12 13 14 16 (inch) (mm) Centre 1 " 0 cutout 15" cutout 12" cutout 10"outside 263mm 12"outside 312mm 15"outside 389mm ? ...
-
Fusion NVSW12 - page 15
15 15 15 Parallel V oice Coil Wiring (1 Ohm operation) T o wire a DVC subwoofer in parallel (to get 1 Ohm), use two short pieces of speaker wire and link the positive from one coil to the positive of the second coil, and do the same for the negative as shown in fig 1. Then wire the amplifier to opposite sides of the subwoofer in order to equalise ...
-
Fusion NVSW12 - page 16
16 16 16 SERIES WIRING FORMULA FOR 2 SPEAKERS 4 Ohm + + + – – – 8 Ohms R1 + R 2 = LOAD IMPEDANCE 4 Ohm P ARALLEL WIRING FORMULA FOR 2 SPEAKERS 4 Ohm 8 Ohm 2.67 Ohms R1 x R2 R1 + R2 4 Ohms x 8 Ohms 4 Ohms + 8 Ohms 32 12 = LOAD IMPEDANCE = = 2.67 Ohms ...
-
Fusion NVSW12 - page 17
17 17 17 TROUBLE SHOOTING No sound from your subwoofer : Check amplifier and wiring connections. Distorted sound : Check the connections from amplifier , processor or head unit. Subwoofer makes unusual noise in sealed enclosure : The enclosure may have leaks causing a lack of back pressure. Remove the subwoofer and ensure the enclosure is complet ...
-
Fusion NVSW12 - page 18
18 18 18 NOTES ...
-
Fusion NVSW12 - page 19
19 19 19 YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal center . PUBLISHED BY FUSION ELECTRONICS LIMITED: © Copyright 2006 by FUSION Electronics Limited. All rights reserved. Specifications and design are subject to change withou ...
-
Fusion NVSW12 - page 20
Specifications and design are subject to change without notice. ...
¿Tienes una pregunta acerca de Fusion NVSW12?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Fusion NVSW12, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Fusion NVSW12 probablemente compartirá una forma de solucionarlo.