-
Radio Shack ET-1125 - page 1
Cat. No. 43-1125 OWNER’S MANUAL Please read before using this equipment. ET-1125 900 MHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting ID A ...
-
Radio Shack ET-1125 - page 2
2 FEATURES Your RadioShack 900 MHz Digital Spread Spectrum Cordless Telephone uses advanc ed technolo gy to give you superior audio q uality and extende d range. The phone’s Caller I D unit records each caller’s telephone nu mber (and name, if available in your area) and t he date and time of the call, as provided b y your local phone company t ...
-
Radio Shack ET-1125 - page 3
3 Security Access- Protection Code — automatically prevents ot her cordless phone users from using your phone line while the handset is off the base. Auto Talk — lets you set the phone so you can answer a call simply by lifting the handse t from the b ase. Redial — lets you q uickly redial any of the last three numbe rs dialed. Flash — send ...
-
Radio Shack ET-1125 - page 4
4 If you use more than on e phone or othe r device on the line, ad d up all of the RENs. If the total is mo re than five (or three in rural areas), yo ur telephones might not ring . If ringer operat ion is im- paired, remove a device from the line. Your phone complies wit h Part 68 of FCC Rules . You must, up on request, provide the FCC registrat i ...
-
Radio Shack ET-1125 - page 5
5 CONTENTS Installation .. ................ ................... ................. ................ ................... ................ ...... 6 Mounting t he Phone .............. ................ .................... ................ ................ ......... 6 On a Desk, Sh elf, or T able .............. ................. ................ ....... ...
-
Radio Shack ET-1125 - page 6
6 INSTALLATION MOUNTING THE PHONE You can place th e phone on a desk or table, mount it on a standard wa ll plate, or mount it directly on a wall. Select a location that is: • near an AC outlet • near a telephon e line jack • out of the way of normal ac tivities • away from e lectrical machinery , electrical appliances, metal walls or filin ...
-
Radio Shack ET-1125 - page 7
7 3. Route the adap ter ’s cor d through the strain relie f slot on the base. 4. Plug the m odular cord’s other end into the pho ne jack. 5. Plug the adapter into a standar d AC outlet. 6. Lift the ba se’ s antenna to a ve rtical position. On a W all Plate or W all 1. Plug one end of the supplied short modular cord into the TEL LINE jack on t ...
-
Radio Shack ET-1125 - page 8
8 7. Lift the ba se’ s antenna to a ve rtical position. Note: To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the key hole slots on the bottom of the base. Follow the steps under “ On a Wall Plate or Wall” on Page 7, then apply these ad- ditional instru ctions for placeme nt on a wall. 1. Dri ...
-
Radio Shack ET-1125 - page 9
9 2. Lift the batte ry pack out of the com- partment. 3. Plug the bat tery pack’s connector in- to the socket in the comp artment, (the connec tor fits only one way ), re- place the batter y pack, and replace the cover . To charge the b attery pack, place the handset eit her faceup o r facedown on the base. The CHARGE/IN USE indica- tor on the ba ...
-
Radio Shack ET-1125 - page 10
10 • If the display is blank and the phone does not work, rechar ge the batte ry pack. (The battery power might be too low to lig ht the display .) • If you are not goin g to use your phone for an extende d period of time, disconnect th e battery pack. This increases the battery pack’s usable life. • The supplied batter y pack should last a ...
-
Radio Shack ET-1125 - page 11
11 TU R N I N G A U T O TA L K ON/OFF Your phone is pr eset so you must pre ss TA L K when y ou lift the h andset from the base to answer a call. With aut o talk turned on, you can an swer a call by just lifting the ha ndset from th e base. If the handset is away fro m the base, you ca n answer by pressing any key. Follow these step s to turn auto ...
-
Radio Shack ET-1125 - page 12
12 3. Press CH/SELECT , then en ter your three-digi t area code. If you make a mistake, repeatedly pr ess / or #/ to move the cursor over the in- correct digi t, then enter the co rrect number . Note: If an are a code is a lready stored, it appear s on the display . T o delete the area code, pre ss DELETE three times. T hen enter your area code. 4. ...
-
Radio Shack ET-1125 - page 13
13 OPERATION A QUICK LOOK AT Y OUR PHONE Use FUNCTION to select your phone’s function s. Use TA L K t o make a call (see “Making and Receiving Calls” on Page 14). Use CALL ID to rev iew the Caller ID records. Use MEM to store o r re- call names and num- bers in memory (see “Memory Dialing” on Page 16). Use DELETE to erase in- formation if ...
-
Radio Shack ET-1125 - page 14
14 MAKING AND RECEIVING CALLS To make a call, lift the han dset and press TA L K . Talk and the curren t vol- ume setting (see “Adjusting the Ha ndset Volume”) appear on t he handset’s dis- play, and the CHARG E/IN USE indicator on the base lights. The n dial the num- ber. The number displays on the hand- set as you dial, th en (after a few s ...
-
Radio Shack ET-1125 - page 15
15 Notes: • Y ou can als o press REDIAL/P AUSE after pressing TA L K to dial the last number di aled. • The red ial memory h olds up to 32 digits, so you can redial long - distance as well as local numbers. • The redial memory al so holds pause entries. See “ Entering a Paus e” on Page 17. USING FLASH FLASH performs the electronic e quiva ...
-
Radio Shack ET-1125 - page 16
16 MEMORY DIALING You can store u p to 20 phone numbers and names in memory, then dial a stored number by enter ing its memory loca tion number. Each number ca n be up to 20 d igits, an d each name can be up to 13 charact er s. Storing a Number and Name in Memory Notes : • An error ton e sounds and the phon e exits the sto ring process if you wai ...
-
Radio Shack ET-1125 - page 17
17 Editing or Deleting a Number in Memory Follow these steps t o edit or delete a memory numb er. 1. Lift the ha ndset. 2. Hold down MEM until Memory Store and a list of memory loca- tion numb ers appear on the displa y . 3. Choose a memory loca tion ( 01 – 20 ) by pressing a number or by repeat- edly pressing VOL/CID or . 4. Press CH/SELECT . A ...
-
Radio Shack ET-1125 - page 18
18 You can also dial a memory number af- ter pressing TA L K . Press MEM (the dis- play does not change but the phon e’s memory recall a ctivates) then en ter a memory location nu mber. Chain-Dialing Service Numbers For quick recall of numbers for special services (such as b ank-by-phone), stor e each group of numbe rs in its own mem- ory locatio ...
-
Radio Shack ET-1125 - page 19
19 CALLER ID OPERATION If you subscribe to Caller ID service from your phone company, the ph one compa- ny sends information about the call, as well as the time and date, betw een the first and second rings of every call yo u receive. The phone displays this in formation af- ter the second ri ng, and it stores up to 50 Caller ID records for la ter ...
-
Radio Shack ET-1125 - page 20
20 Caller ID Messages ADDING/DELETING THE AREA CODE When the area co de of the received call is the same as the one you stor ed (see “Storing Your Ar ea Code” on Page 11), the caller ID record does not sh ow the area code. If it is diffe rent, the record shows the area code. However, you can add o r delete the ar- ea code on th e display. When ...
-
Radio Shack ET-1125 - page 21
21 STORING A CALLER ID RECORD TO MEMORY Follow these steps to store the name and number from a Caller ID record int o a memory location. 1. Press CALL ID then VOL/CID or to recall the rec ord you want to store. If you want t o add or delete t he area code, press 3 . 2. Press MEM . Select Location appears. 3. Choose a memory loca tion ( 01 – 20 ) ...
-
Radio Shack ET-1125 - page 22
22 T ROUBLESHOOTING We do not expect yo u to have any problems with your phone, but if yo u do, these suggestions might help . Problem Suggestio n The phone d oes not wor k or works poorly . Be sure the base’ s phone line cor d and AC adapter are co rrectly and securely conne cted. Be sure the battery pack in t he handset is con- nected and charg ...
-
Radio Shack ET-1125 - page 23
23 If you still have problems, disconnect the phone. If other phones on the s ame line work properly, t he fault is in t his phone or its installation. If you cannot fin d the prob- lem, take the phone to yo ur local RadioShack store fo r assist ance. The phone ca nnot be oper ated at a useful distance from the base because the signa l becomes we a ...
-
Radio Shack ET-1125 - page 24
24 CARE AND MAINTENANCE Your RadioShack 900 MHz Digita l Spread Spectrum Cord less Telephone is an ex- ample of superior design and craftsmanship. The follow ing s uggestions will help you care for your phone so you ca n enjoy it for years. Keep the phone dry. If it gets wet, wipe it dry immed iately. Liquids mig ht contain mine rals that can corro ...
-
Radio Shack ET-1125 - page 25
25 REPLACING THE BATTERY PACK If you follow the instructions in “Connect- ing and Charging the Bat tery Pack” on Page 8, the battery pack should la st about one yea r. If the battery pa ck does not hold a char ge for more than 2 hours after an overnight ch arge, replace it wit h a new 3.6-volt, 600 mAh batt ery pack with a connecto r that fits ...
-
Radio Shack ET-1125 - page 26
26 advance. If advan ce notice is no t practi- cal, the phone co mpany notifies you as soon as possible and ad vises you of your right to file a complaint with the FCC. Also, the phone company can make changes to its lines, equi pment, opera - tions, or procedures t hat could affect th e operation of this telephon e. The tele - phone company notifi ...
-
Radio Shack ET-1125 - page 27
27 NOTES ...
-
Radio Shack ET-1125 - page 28
RadioShack Corpor ation Fort W orth, T exas 76102 UCZZ01673ZA 09A00 Printed in China Limited One-Y ear W arranty This product is warranted by RadioShack against manufactu ring defects in material and workman- ship under normal use for one (1 ) year from t he da te of pu rchase from Radi oSha ck compan y- owned stores and authorized RadioShack franc ...
¿Tienes una pregunta acerca de Radio Shack ET-1125?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Radio Shack ET-1125, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Radio Shack ET-1125 probablemente compartirá una forma de solucionarlo.