-
Electrolux EWF 107410 - page 1
user manual Washing Machine EWF 107410 A ...
-
Electrolux EWF 107410 - page 2
Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information 2 Environment concerns 3 Technical information 4 Product description 4 Control panel 5 Programmes 6 Hints and tips 8 Before first use 9 Daily use 9 Care and cleaning 11 Troubleshooting 14 Installation 16 Subject to change without notice SAFETY ...
-
Electrolux EWF 107410 - page 3
• Make sure that the mains plug is discon- nected from the main s socket during in- stallation. • Only a qualified person must do the elec- trical installation, th e plumbing and the in- stallation of the applia nce. This to prevent the risks of structural damage or injury. •D o n o t i n s t a l l o r u s e the appliance where the temperatur ...
-
Electrolux EWF 107410 - page 4
TECHNICAL INFORMATION Dimensions Width / Height / Depth 600 / 850 / 480 mm Electrical connection: Voltage Overall power Fuse Frequency 220-240 V 2100 W 10 A 50 Hz Level of protection against ingress of solid part icles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water ...
-
Electrolux EWF 107410 - page 5
2 Large plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. 3 Plastic hose guide To connect the drain hose on the edge of a sink. 4 Small plastic caps To attach the protect ion cover to th e bottom of the appliance. CONTROL PANEL 1 3 4 5 6 7 8 9 2 90° 75° 60° 40° 30° 60° 40° 30° 30° 40° ...
-
Electrolux EWF 107410 - page 6
Easy Iron button 4 Press this button to prevent the creases in the fabrics. When you press this button, the appliance decrease th e intensity of the washing phase and spin speed. Automatically, the s pin speed is set to 800 rpm. Set this fun ction to iron the laun dry easily and quickly. Extra rinse button 5 Press this button to add rinsing phases ...
-
Electrolux EWF 107410 - page 7
Programme Temperature Type of load and soil Weight of load Programme phases Possible functions Хлопок Цветно е 30° C White and coloured cotton with light soil. max. 7 kg Wash Rinses Spin phase at the maximum speed Синтетика 60° C Synthetic or mixed fabric items with normal level of soil max. 3.5 kg Wash Rinses Spin phase at ...
-
Electrolux EWF 107410 - page 8
Programme Temperature Type of load and soil Weight of load Programme phases Possible functions Стирка без нагрева White and coloured cotton with light soil. max. 7 kg Wash Rinses Spin phase at the maximum speed Полоскание All fabrics. max. 7 kg Rinse with additive Spin phase at the maximum speed Отжим Spin phase for h ...
-
Electrolux EWF 107410 - page 9
Equivalent scales measure the water hard- ness: • German degrees (°dH). • French degrees (°TH). • mmol/l (millimol for each l itre - interna- tional unit for the hardness of water). • Clarke degrees. Water hardness table Level Type Water hardness °dH °T.H. mmol/l Clarke 1 soft 0-7 0-15 0-1.5 0-9 2 medium 8-14 16-25 1.6-2.5 10-16 3 hard ...
-
Electrolux EWF 107410 - page 10
2 1 1 The detergent compartment for the prewash phase or for th e soak pro- gramme. Add the detergent for prewash and soak before the start of the pro- gramme. 2 The detergent compartment for the washing phase. If you use a liquid detergent, put it im- mediately before you start the pro- gramme. Liquid additives compartment (fabric conditioner, sta ...
-
Electrolux EWF 107410 - page 11
The appliance does not drain t he wa- ter. Change a function You can change only so me functi ons be- fore they operate. 1. Press the Start/Pause button. 2. Change th e function set. Set the delay start 1. Press the delay start button again and again until the display shows the num- ber hours. 2. Press the start/paus e button, the appli- ance start ...
-
Electrolux EWF 107410 - page 12
Caution! Do not use alcohol, solvents or chemical products. Descaling The water we use contains limescale. If it becomes necessary, use a water softener to remove limescales. Use a special product made for washing machines. Obey the in structions that you find on the packagin g of the manufacturer. Do this separately from the laundry wash. Maintena ...
-
Electrolux EWF 107410 - page 13
• The drum cannot turn. • The appliance makes an unusual noise because of the blockage of the drain pump. Warning! 1. Disconnect the mains plug from the mains socket. 2. Do not remove th e filter while the appliance operates. Do not clean the drain pump if the water in the appliance is hot. The water must be cold before you clean the drain pump ...
-
Electrolux EWF 107410 - page 14
• The appliance does not fill with water. • The appliance fills with the water for a long time. Warning! Disconnect the mains plug from the mains socket. To clean the filter: 1. Close the wat er tap. 2. Remove the inlet ho se behind the appli- ance. 3. Clean the filter in the valve with a stiff brush or a towel. 4. Install again the inlet hose. ...
-
Electrolux EWF 107410 - page 15
Problem Possible ca use Possible solution The appliance does not start. The mains plug is not connec- ted in the mains socket. Put in the mains plug. The fuse in the box fuse is damage. Replace the fuse. The appliance door is open. Close the door firmly. You do not press the start but- ton Press the start button. The programme knob is not in the co ...
-
Electrolux EWF 107410 - page 16
Problem Possible ca use Possible solution There is water in the drum. Set the drain or the spin programme. The appliance makes an unusual noise. Incorrect level of the appli- ance. Adjust the level of the appliance. Refer to 'Installation'. You did not remove the pack- aging and/or the transit bolts. Remove the packaging and/or the trans- ...
-
Electrolux EWF 107410 - page 17
3. Remove the internal film . 4. Open the door and remove all the items from the drum. 5. Put the front piece on the floor behind the appliance. Care fully put down the appliance with the rear side on it. M ake sure not to damage the h oses. 6. Remove the polystyrene protection from the bottom. 1 2 7. Install the plastic cover (A), removed from the ...
-
Electrolux EWF 107410 - page 18
10. Replace the plasti c spacers with the large plastic caps. You can find these large caps in the user manual bag. Warning! Remove all the packaging and the transit bolts before you install the appliance. We recommend that you keep the packaging and the transit bolts for when you move the appliance. Positioning and levelling • Install the applia ...
-
Electrolux EWF 107410 - page 19
With the plastic hose guide. • • On the edge of a sink. Make sure that the plastic guide cannot move when the appliance drains. Attach the guide to the water tap or the wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into a drain pipe at a height of not l ess than 60 cm and not more than 90 cm. The end of the drain ...
-
Electrolux EWF 107410 - page 20
155219070-A-1 82011 www.electrolux.com/shop ...
¿Tienes una pregunta acerca de Electrolux EWF 107410?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Electrolux EWF 107410, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Electrolux EWF 107410 probablemente compartirá una forma de solucionarlo.